Activated carbon screening drying related questions

Answers
Asked by
Updated
Activated carbon screening drying02022-02-13 22:39:24
Wooden raw materials mainly include walnut shell 6.7, wood I8]I9], fruit shell [10.11], bamboo [213], crop straw 14.15], carbon containing waste residue 16][I7, etc. In addition, good quality granular activated carbon can also be prepared by separating charcoal powder 8 with dust removal ash and waste polystyrene foam Preparation method of granular activated carbon is mainly physical activation method [12 and chemical activation method [3.821]. Physical activation method is to dry, carbonized materials will be first, and then carbonized material crushing, then add to the crushing carbonized material, the binder and its mixing, forming and drying grain charcoal, then the granular activated carbon under a certain temperature, the final results of dry granular activated carbon products. The method commonly used activation main gas water vapor and carbon dioxide [20] [l ⒂ 5]. The physical activation method is characterized by high activation temperature (generally at about 900 ℃), the equipment investment is large, step trival, But the pollution to the environment is relatively small.gold recovery from activated carbon  Chemical activation method is to mix raw materials with chemicals in a certain proportion, impregnation for a period of time, kneading and plasticizing at an appropriate temperature, and then carbonization and activation are completed in one step.activated carbon china manufacturers   The chemicals commonly used are ZNC12, H5PO and KOH. At present, more research is done on H; PO4 activation method, the technological process is shown in Figure 1-2. Chemical activation process is characterized by low activation temperature (generally 400-600℃), easy to adjust the pore structure of the product. However, there are also some disadvantages :(1) it is highly corrosive to equipment; (2) it pollutes the environment, etc., which makes the chemical method limited to a certain extent. There are many researches on activation by adding H3P04 at home and abroad. In China, the development and research work of preparing activated carbon by using phosphoric acid method with wood chips as raw material has been carried out since the end of 1980s,It has been successfully put into industrial application in the 1990s,The mesopore (transition pore) structure of products produced by phosphoric acid activation method is well developed and has wide application fields. 
Activated carbon screening drying sales02022-02-13 22:40:25
Science and the project feasibility study report based on the in-depth market supply and demand analysis, the future price forecasting, the resources supply, construction scale, process route, equipment selection, environmental impact, energy conservation and emissions reduction, investment estimation and fund-raising, profitability and other aspects of scientific research, from the Angle of market, technology and economy, engineering project study and comparative analysis, and after the completion of the project have made the financial, economic and social environment for scientific forecast, for the project decision-making provides a fair and reliable, scientific investment advice. activated charcoal suppliers & manufacturers  "Activated carbon production and construction project" belongs to zhoukou xyz co., ltd. plans in zhoukou economic development zone (new) projects, proposed the project the total area of 25072.53 square meters about 37.59 acres), is expected to total investment of 95.0984 million yuan, including: investment in fixed assets of 83.8144 million yuan, flow capital of 11.284 million yuan, is expected to comprehensive income for 94.17 million yuan. The economic situation this year is generally characterized by a steady but positive trend, and more positive changes have taken place in economic development.www.wyactivatedcarbon.com  Stability is reflected in the fact that the economy performed within an appropriate range, growth became more stable, and the quality and performance of the economy continued to improve. The economic structure has continued to improve. Innovation is playing an increasingly important role in underpinning development. The service sector accounts for a larger share of the economy, and consumption is contributing more to growth. Stability is also reflected in new breakthroughs in reform and opening up. 
Activated carbon filtration screening02021-06-06 23:50:07
Advanced activated carbon is mainly used for high demand area activated carbon, catalyst and catalyst carrier (, nail, guy, platinum and palladium), precious metal recovery and gold extraction, blood purification, auto carbon tank, high-performance fuel cells, electric double layer aluminum alloy casting machine, lithium battery cathode materials, super capacitor can storage materials, military, aerospace fields such as requirement. The role of activated carbon is mainly usactivated charcoal wholesale australia ed for adsorption of harmful gases, filter insoluble, adsorption of some soluble. Activated carbon components are mainly made of charcoal, various fruit shells and high quality coal as raw materials, through physical and chemical methods of raw materials crushing, sifting, catalyst activation, rinse, drying and screening a series of processes and manufacturing. Wooden activated carbon produced by this project is mainly used as air purifier and automobile exhaust purification, which has a certain promotion effect on energy saving and environmental protection. Activated carbon is now widely used and has a promising future. If the gas speed is very small, the size of the adsorber is large and uneconomical.https://www.dxdcarbon.com/   If the gas velocity is too large, the pressure drop will increase and the adsorption efficiency will be affected.The optimum gas velocity was determined by experiment. The adsorption design can not pursue too high adsorption efficiency, the empty tower speed value is reduced, it will make the adsorption bed volume, the amount of adsorbent and equipment cost increased greatly;On the contrary, it is not appropriate to take too large empty tower gas speed. Although the equipment cost is low, the adsorption efficiency drops a lot, and the pressure drop of the system will rise rapidly with the increase of the empty tower speed, resulting in excessive power consumption. Therefore, due to the selection of the appropriate air speed of the empty tower, the most suitable air speed of the empty tower is 0.8~1.2m/s"21, according to the empirical conclusion, this design determines 
Ding Xinda drying activated carbon price02021-11-29 22:38:18
Its adsorption is selective, and non-polar substances are easier to be adsorbed than polar substances.In the same series of substances, the higher the boiling point of the substance, the more tolerantEasy to be adsorbed, the greater the pressure, the lower the temperature, the greater the concentration, the greater the amount of adsorption.On the contrary, decompression and heating are beneficial to gas desorption.It is often used for gas adsorption,Separation and purification, recovery of solvents, decolorizing agents for sugar solution, grease, glycerin, medicine, deodorant for drinking water and refrigerators, filter agent for gas masks,It can also be used as a catalyst or metal salt catalyst carrier.Early production of activated carbon raw materials for wood, hard nut shell or animal bones, later mainly used coal, after dryingDistillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃. gold coconut shell activated carbon  ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. activated carbon from china  
What is the majority of carbonization process of activated carbon? How to produce high quality activated carbon in large quantities02021-07-10 01:00:27
Generally speaking, forming carbon can be mixed with a variety of raw coal to adjust the pore distribution characteristics of the final product, so as to obtain some special application performance, and more than 80% of the pore distribution characteristics of raw coal directly broken carbon has been determined by the raw material, so the performance and use is simple.activated carbon manufacturers  (2) wood activated carbon.It is mshell/core activated carbon.Such as coconut shell carbon, apricot kernel carbon, peach kernel carbon, etc.(4) petroleum activated carbon.Using petroleum asphalt, petroleum coke as raw materials, made of activated carbon products.resin activated carbon.Using phenolic resin, waste ion exchange resin as raw materials, through a special process of activity.Carbon products, sometimes fibrous carbon also falls into this category.High - definition watermark of cut document under air(6) other small varieties of activated carbon products. Made of animal blood blood carbon, made of animal bones bone charcoal (there is very little, but bone charcoal carbon main ingredients of hydroxy calcium phosphate), with active carbon molecular sieve made of various materials, made of strong base and carbon materials of high surface area activated carbon, is made of organic polymer solution after mold made of special process method of activated carbon, activated carbon aerogels and so on. coal activated carbon manufacturer  Some of them are very small production and dosage, and some are still in the laboratory research stage, so they are included in the category of small varieties of activated carbon products. ade of all kinds of hard wood, crop wastes, and other industrial and agricultural wastes containing lignocellulose The beansMaterial as raw material, through the chemical method, physical method or physical-chemical combination of activated carbon. 
Activated carbon increases with molecular weight and activated carbon point02021-09-13 01:05:58
The purification efficiency of activated carbon adsorption method is 99.2%~99.3%. For the treatment of large air volume and low concentration of organic waste gas, it is agreed that this method is the most mature and reliable technology at home and abroad, but the T art process is too long, the operation cost is high, and it is often more difficult to need a stable steam source. In view of these problems, combined with the characteristics of this graduation design and only body requirements, the use of activated carbon fixed bed adsorption system for industrial organic waste gas purification, the selection of honeycomb activated carbon as adsorbent.The process system is compact and integrated with adsorption and desorption.www.powdered-activated-carbon.com  The waste gas produced in the production process, mainly of benzene, toluene, xylene, etc., according to the nature of benzene class, this scheme adopts the active carbon as adsorbent to absorb the waste gas, the adsorption bed configuration 2 sets of above commonly, use rotation, when one adsorption bed adsorption of organic adsorption amount of reach regulation, change to another Ⅰ adsorption bed for adsorption purification operation, at the same time to take off one in front of the adsorption bed with regeneration.Desorption is carried out by heating under the action of additional steam, and most of the hotgas released by the tail gas is used for desorption and regeneration of adsorbent in the adsorption bed to achieve the utilization of waste heat.The waste gas volatilized from production is sent to the adsorption tower by centrifugal fan with activated carbon as adsorbent. The gas in the tower is processed through the activated carbon filter layer from right to left and from bottom to top, and the purified gas is discharged into the atmosphere through the exhaust pipe. pelletized activated carbon 
Activated carbon activated carbon made of MONOsodium glutamate development02021-11-30 01:17:34
When the temperature is below 600℃, the specific surface area of carbonized material increases with the increase of temperature.When 600~900℃, the specific surface area reaches a certain value: 250~300 m2/g; when above1000℃, the specific surface area shrinks rapidly.activated carbon from china   When the carbonization temperature is above 800℃, the reaction performance of carbonized compounds and activation gas gradually becomes weaker, so the carbonization temperature is generally below 1000℃. However, if the residual volatile content and thermal effect are taken into account, the most suitable temperature should be 600~700℃39]. gold coconut shell activated carbon  The carbonized substance obtained from the carbonization process is placed in water vapor or a mixture of water vapor and combustion gas and heat treated at 800~1000℃, which is called the activation process. The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method. Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. The main principle of chemical activation method is the raw materials in 0.5~5 times the chemical activator impregnation for a certain time, in the process of heating, because of the dehydration of chemicals, the H and О elements in the raw materials in the form of water vapor released, the results produced a developed porous structure of activated carbon.The method requires the oxygen content in the raw material.25%, hydrogen content ≥5%[4], and most of the materials that can meet the requirements of this index are rice husk, wood and coal 
Activated carbon are widely used Activated carbon purifies how clean water is 02021-07-18 23:14:58
Adsorption capacity refers to the amount of adsorbents adsorbed on the adsorbent per unit mass under certain conditions. It is usually expressed in terms of K adsorbents /kg of adsorbent or mass percentage, which is a sign of the adsorption capacity of the adsorbent. In industry, the amount of adsorption is called the activity of the adsorbent.activated carbon powder suppliers  The activity of the adsorbent can be expressed in two ways :(1) the static activity of the adsorbentUnder certain conditions, the equilibrium adsorption capacity of the adsorbent is its static activity.For a certain adsorption system, the static activity depends only on the adsorption temperature and the concentration or partial pressure of the adsorbed substance.https://www.activated-carbon-pellets.com   Dynamic activity of adsorbents Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent. The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. 
What is the difference between coconut shell activated carbon and columnar activated carbon?02021-02-02 17:57:10
1. First of all, it is clear from the appearance that the columnar activated carbon has the appearance of black cylindrical particles. coconut shell activated carbon for gold recovery The appearance of coconut shell activated carbon is black amorphous granular. 2. The difference between columnar activated carbon and coconut shell activated carbon in terms of material. The columnar activated carbon is made of fine anthracite as raw material and refined by advanced technology. Coconut shell activated carbon is made of fine coconut shell through a series of production processes. 3. Columnar activated carbon and coconut shell activated carbon have different physical and chemical indicators and components. Coconut shell activated carbon and columnar activated carbon can also be used for the purification of toxic gases, waste gas treatment, industrial and domestic water purification, solvent recovery, etc. buy bulk activated carbon pellets Based on the standards produced by activated carbon manufacturers, which one to choose depends on the needs of users and the scope of use. 4. The price of columnar activated carbon and coconut shell activated carbon can be said to be very different. Compared with coconut shell activated carbon with the same effective content or composition, the price of coconut shell activated carbon is much higher than that of columnar activated carbon. 
Why activated carbon granular shell activated carbon has such a good effect02021-06-28 18:55:05
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.dxdcarbon carbon  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties. activated carbon suppliers in uae  Chemical method in addition to certain micropores, macropores, there are more mesopores (transition pores), so it is more suitable for the application of liquid phase, adsorption of larger molecules of substances, such as sugar solution has a good decolorization effect; When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements. The kinetic activity value of adsorbent is the main basis for the design of adsorption system. The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps (1) External diffusion, the adsorbate from the main air flow through the air film around the particles to the outer surface of the adsorbent; (2) Internal diffusion, the adsorbate from the outer surface through micropores to the surface of the adsorbent micropores (3) adsorption, the adsorbent reached the microporous surface of the adsorbent is adsorbed (4) The desorbed adsorbate diffuses to the main body of the gas phase through internal and external diffusionPhysical adsorption process is generally controlled by internal and external diffusion, chemical adsorption is controlled by both surface dynamics and internal and external diffusion.Because of the complexity of the adsorption process and many influencing factors, it is difficult to derive the rate theoretically, so it is generally determined by experience or model experiment. 
Combined Equations (5) and (10) can calculate the total amount of Pb and 21Bi atoms in activated carbon after adsorption for any length of time (i.e., the total number of activated carbon Y).Let n=0 in Equation (10), then the accumulation and attenuation 02022-01-14 22:57:28
Combined Equations (5) and (10) can calculate the total amount of Pb and 21Bi atoms in activated carbon after adsorption for any length of time (i.e., the total number of activated carbon Y).Let n=0 in Equation (10), then the accumulation and attenuation of total atomic amount of 2Pb and 2Bi (total number of activated carbon Y) after the removal of activated carbon can be calculated in Equation (10).In fact, if thin layer activated carbon is used, the value of N should be equal to the product of the adsorption coefficient of activated carbon and radon concentration, while the radon adsorption coefficient of activated carbon mainly depends on the type of activated carbon and is affected by temperature, humidity and other factors. gold adsorption onto activated carbon  When the radon adsorption coefficient of activated carbon is constant,n is proportional to the concentration of radon. In this case, Equation (10) represents the functional relationship among the total number of activated carbon V, radon concentration and adsorption (or exposure) time. Therefore, the concentration of radon in the environment can be calculated according to the total number of activated carbon and adsorption time.Simulation calculation and result analysis of total number of activated carbon According to Equations (5) and (10), a computer program can be written to calculate the relationship between the total number of Y in the process of radon adsorption on activated carbon and the relationship between the total number of Y after the removal of activated carbon and the change of time. activated carbon manufacturers uae  
Activated carbon surface adsorption and activated carbon strength02021-09-06 18:55:02
Principle of activated carbon adsorptionwww.powdered-activated-carbon.com  activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detectionIn domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.pelletized activated carbon   F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. The adsorption capacity of activated carbon on each gas (unit: mL /cm3):H2, O2, N2, CI2, CO2 4.5, 35, 11, 494, 97 The main factors affecting the adsorption of activated carbon ① the nature of activated carbon adsorbent The larger the surface area, the stronger the adsorption capacity; Activated carbon is a non-polar molecule, easy to adsorb non-polar or very low polarity adsorbent The size of the activated carbon adsorbent particle, the structure and distribution of the fine pore and the surface chemical properties also have a great influence on the adsorption. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions