Ding Xinda activated carbon chemical pharmaceutical sales related questions

Answers
Asked by
Updated
Ding Xinda activated carbon chemical pharmaceutical sales02022-01-18 22:20:11
(1) According to the relevant national standards, the sludge of Liede Sewage Treatment Plant is mainly composed of volatile organic compounds, with a volatile content of 64.86%, which can be used as the main raw material for the preparation of activated carbon.(2) Without adding additives to the sludge, the concentration of sulfuric acid and zinc chloride is 4 mol·L' and the volume ratio is 2:1. The activated carbon prepared has the maximum iodine adsorption value of 549.6 mg·g 'and the yield of 51.3%, which is the better carbon sample prepared by pure sludge and is recorded as SAC.which was recorded as PAC;By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperature >Is the activator concentration >Pyrolysis time > adsorption on activated carbon  Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbon;The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure. SEM analysis showed that the surface pores of commercial activated carbon were microporous and relatively uniform, while the surface of SAC and PAC presented irregular porous structure.
Ding Xinda activated carbon pharmaceutical development pricing02021-12-01 23:10:11
 gold coconut shell activated carbon cIn painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.activated carbon from china  emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes. 
Ding Xinda activated carbon pharmaceutical development pricing to miscellaneous02021-12-01 23:13:11
Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress.pelletized activated carbon suppliers   In 1916, Langmuir studied the adsorption of monolayer molecules and proposed the Langmuir adsorption isotherm equation.Freundlich and Zsigmondy proposed the capillary condensation theory for gas adsorption and obtained the semi-empirical Freundlich adsorption isotherm equation.Temkin also suggested a semi-empirical isothermal equation.powdered activated carbon producers  Based on Gibbs equation, Toth used dimensionless function V to derive another adsorption isotherm equation for heterogeneous surfaces.Fowler and Guggenhein derived a formula of the same form from the concept of statistical mechanics.Goldmann and Polanyi proposed the adsorption space theory, which believed that the continuous decrease in the molecular density of multiple layers on the surface of the adsorbent was caused by the weakening of the adsorption molecular force 
Activated carbon ding Xinda sales02021-10-23 02:37:28
Chapter 1 This project adopts the company's own large amount of monolayer stone which can be dried and preserved and treated with solution Preparation method of graphite namely graphene.granular activated charcoal  Raw materials are commonly used graphite and common chemicals, easy to operate, easy to enlarge. It solves the problem that graphene materials are expensive and cannot enter the field of industrial application without large-scale production. It provides a basis for large-scale application of graphene.Using the super conductivity and large specific surface area of graphene solves the problem that the traditional activated carbon material can no longer improve the electric storage performance when used on the electrode. Complete set of equipment in addition to solve the industrial method of graphene liquid phase composite to activated carbon materials for super capacitor, and can be activated activated carbon materials at room temperature. Complete sets of equipment meet the requirements of cleaner production. coal activated carbon supplier  
Ding Xinda activated carbon sales02021-12-17 23:01:03
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.activated carbon for gold recovery  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. activated carbon wholesale 
Ding Xinda activated carbon grease and chemical products02021-10-19 00:26:43
Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent. The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. granular activated charcoal  The kinetic activity value of adsorbent is the main basis for the design of adsorption system.coal activated carbon supplier   The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps (1) External diffusion, the adsorbate from the main air flow through the air film around the particles to the outer surface of the adsorbent; (2) Internal diffusion, the adsorbate from the outer surface through micropores to the surface of the adsorbent micropores (3) adsorption, the adsorbent reached the microporous surface of the adsorbent is adsorbed (4) The desorbed adsorbate diffuses to the main body of the gas phase through internal and external diffusionPhysical adsorption process is generally controlled by internal and external diffusion, chemical adsorption is controlled by both surface dynamics and internal and external diffusion.Because of the complexity of the adsorption process and many influencing factors, it is difficult to derive the rate theoretically, so it is generally determined by experience or model experiment. 
Ding Xinda activated carbon Samsung sales02021-12-22 00:08:31
In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties. Chemical method in addition to a certain microporous, macroporous, there are more mesopore (transition hole), so more suitable for the application of liquid phase, adsorption of larger points · sub material, such as sugar solution has a very good decolorization effect;www.powdered-activated-carbon.com  When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements.activated carbon pellets wholesale   Particle strength is also a main index of granular activated carbon. In order to improve the particle strength of granular activated carbon, usually take some special processing measures, such as adding some help plasticizing material and proper mechanical processing [14] or control in the process of kneading kneading temperature and kneading time, can greatly improve the strength of granular activated carbon particles, making the strength of the granular activated carbon has reached the fruit shell carbon intensity index. 
Ding Xinda activated carbon chemical properties and development potential02021-11-28 21:34:48
Principle of activated carbon adsorption activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detection,powdered activated carbon producers  In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester. pelletized activated carbon suppliers 
Ding Xinda activated carbon developed sales methods02021-12-09 23:01:24
By use.Generally there are three kinds. (1) gas phase adsorption of activated carbon.activated carbon company   Can be used for exhaust treatment, air purification, solvent recovery, gas separation, deodorization, desulfurization and denitration, industry.Raw material gas refining, gas chromatography filler, air sampler, fresh-keeping, ozone removal, cigarette filter nozzle, gas adsorption storage, military and civil gas masks, etc.(2) liquid phase adsorption of activated carbon.Tap water treatment, pure water manufacturing, industrial and domestic sewage advanced treatment, decolorization refining, blood purification, gold recovery, double capacitor electrode, pharmaceutical carbon, etc.(3) catalyst (catalyst) with activated carbon.activated carbon gold mining  Both can be directly used as a catalyst for this industrial process (such as phosgene synthesis, synthesis of vinyl acetate, etc.), more time activated carbon is used as a catalyst carrier (such as carrying precious metal pins, men, palladium, nails, gold made of pin carbon, palladium carbon catalyst, etc.).(1) solvent recovery.Such as recycling printing industry with xylene, toluene, benzene and other solvents;Recycling organic solvents such as ethanol, acetone, ester and ether from plastics and artificial leather industry;Recycling of hexanone in tape factory;Recycling of dichloromethane from resin processing plants, etc.(2) air purification.Such as electronic, pharmaceutical industry aseptic workshop air purification;Removal of ozone in the air of the copy room and computer room;The removal of foreign odor in the air of confined space;Odor removal from refrigerators, etc.(3) Nuclear and biochemical protection.Nuclear radiation, biological warfare agents, chemical warfare agents are weapons of mass destruction, activated carbon is loaded with a variety of chemical agents can effectively protect it Activated carbon or chemical-loaded activated carbon is often used as a key component of personal protective equipment in the presence of toxic gases in the civilian industry. During the SARS crisis in late 2002 and early 2003, special protective masks with activated carbon loaded with silver played a role in protecting health care workers. 
Ding Xinda activated carbon distribution sales and crushing02021-12-10 22:21:16
The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method.activated carbon for gold recovery  Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. activated carbon wholesale 
Ding Xinda activated carbon carbon adsorption and carbon principle02021-11-29 22:41:57
② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. gold coconut shell activated carbon  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
Ding Xinda activated carbon use02021-12-22 00:10:48
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.activated carbon for gold recovery  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption apparatus.activated carbon wholesale  For the gas phase adsorption, the size of the gas molecules is usually less than 1. ONM, the use of microporous activated carbon; For liquid-phase decolorization refining, due to the large size of the liquid molecules, it is necessary to use activated carbon with developed mesopore. Activated carbon has a large specific surface area and a particularly developed micro-pore structure, which is the main reason for its strong adsorption capacity and large adsorption capacity. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions