Ding Xinda activated carbon raw materials related questions

Answers
Asked by
Updated
Ding Xinda activated carbon raw materials02022-01-13 23:17:38
Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, gold adsorption on activated carbon electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gases www.chinactivecarbon.com  
Ding Xinda activated carbon anthracite raw materials and prices02022-01-13 22:48:03
Electrochemical modification is to change the electrical and chemical properties of activated carbon surface by using micro electric field, so as to improve the adsorption selectivity and performance.It does not need to add chemical agents, does not need to heat, does not cause pollution to the environment, low energy consumption, only a few hundred millivolts, easy to operate.The results show that the adsorption equilibrium of activated carbon is dependent on the electric potential: the adsorption amount of activated carbon increases with the increase of the potential, and the adsorption speed is accelerated;Arpolarity polarization is beneficial to the adsorption of chloroform by activated carbon, while cathodic polarization inhibits the adsorption of chloroform by activated carbon 3-341]. Activated carbon heteroatom carrier and compound modificationActivated carbon has very high stability and good activity, these two basic properties become the activated carbon as a catalyst or catalyst carrier conditions.By introducing certain heteroatoms and compounds on the surface of activated carbon by liquid phase deposition, the adsorption performance of activated carbon can be increased by using the binding effect between these substances and adsorbents.compounds, which has the advantages of increasing the reaction rate and increasing the adsorption capacity.Yang Quanhong et al. 'Using FESO;Activated carbon material was modified.gold adsorption on activated carbon  The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon. www.chinactivecarbon.com 
Ding Xinda activated carbon carbon adsorption and carbon principle02021-11-29 22:41:57
② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. gold coconut shell activated carbon  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
Ding Xinda activated carbon value02021-12-29 21:32:21
At present, the organic pollution of drinking water source is relatively serious. The organic pollutants themselves are not only highly toxic, but also may generate halogenated disinfection by-products (DBPs) after chlorination disinfection. Meanwhile, the existence of organic compounds will reduce the biological stability of drinking water and lead to the secondary reproduction of microorganisms in the pipe network. Therefore, it is important to reduce the content of organic pollutants in drinking water. Conventional water treatment process has low removal efficiency for organic pollutants, so it is imperative to seek economic and efficient treatment technology. On the basis of giving full play to the advantages of ozone oxidation to remove organic matter, ozone catalytic oxidation technology can induce the formation of highly oxidizing hydroxyl radical (-Oh), which can effectively remove trace organic pollutants that are difficult to degrade in water and reduce the content of ozone oxidation by-products. It is a kind of water treatment method with great prospect.activated carbon for gold recovery  Laboratory studies have shown that ceramic honeycomb activated carbon catalytic ozone oxidation technology and removal of trace organic matter in water has more obvious advantages, but the catalytic oxidation and active carbon process characteristics to be in-depth study, therefore the pilot was investigated through honeycomb ceramic catalytic ozonation and activated carbon catalytic ozonation and activated carbon filter combination process operation characteristics. activated carbon wholesale 
Ding Xinda activated carbon use02021-12-13 00:44:20
2.1.3 Determination of ash content. Put 150mL porcelain cyanosis pot in muffle furnace, burn it at (65020) "℃ to constant weight, put the cyanosis pot in dryer, cool and weigh; Weigh 5 grams of the crushed sample (approximately 0.1mg) and place it in 150mL porcelain coating that has been burned to constant weight; Put Zengtan into a muffle furnace whose temperature does not exceed 300℃, open the cyanosis cap, and gradually increase the temperature to a constant weight at 650 ℃ 20℃. It takes about three hours. Calculate ash value and get ash content.activated carbon for gold recovery  2.1.4 Determination of methylene blue adsorption value. The crushed sample was weighed with 1.0 grams (approximately to 1mg) and placed in a 100mL grinding stopper conical flask. An appropriate amount of methylene blue test solution was added with an eyedrot. The filtrate was placed in a colorimetric dish with a light diameter of LCM, and the absorbance was measured with a spectrophotometer at a wavelength of 665nm. The absorbance was compared with the absorbance of the standard cupric sulfate filter. The number of ml of methylene blue test solution consumed was the methylene blue adsorption value of the sample. activated carbon wholesale  
Ding Xinda activated carbon use02021-12-22 00:10:48
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.activated carbon for gold recovery  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption apparatus.activated carbon wholesale  For the gas phase adsorption, the size of the gas molecules is usually less than 1. ONM, the use of microporous activated carbon; For liquid-phase decolorization refining, due to the large size of the liquid molecules, it is necessary to use activated carbon with developed mesopore. Activated carbon has a large specific surface area and a particularly developed micro-pore structure, which is the main reason for its strong adsorption capacity and large adsorption capacity. 
Ding Xinda activated carbon raw material use02022-01-13 23:16:06
The maintenance sewage contains a large number of complex biodegradable substances, biodegradability is poor, for many years mainly rely on fresh water dilution treatment and combustion furnace treatment, but these two methods are low efficiency and high cost, so it is necessary to develop new wastewater treatment methods.www.chinactivecarbon.com   Although we have studied the upflow anaerobic sludge bed reactor (UASB) for the treatment of high concentration sewage of the natural gas purification plant, the start-up test results of 133 days show that the effluent COD removal rate is only about 40% when the influent COD is 6000mg/L, and the treatment effect is not good. Therefore, it is of practical significance to explore and seek an effective pretreatment method.gold adsorption on activated carbon  In this paper, Fenton oxidation and activated carbon adsorption were combined to pretreat the wastewater from natural gas purification maintenance, in order to improve the subsequent operation efficiency of UASB. This experiment by orthogonal test to determine the Fenton reagent oxidation first preliminary operating conditions, on this basis, carries on the single factor analysis method, the main factors influencing the Fenton reagent treatment effect for each study, investigation of its influence on wastewater COD removal rate, the results show that Fenton oxidation method the optimum operating conditions for natural gas purification overhaul wastewater treatment: HO2 dosing quantity 0.3 mol/L, n (HO)/n (Fe) = systematically, initial pH = 3, reaction temperature 70 ℃, reaction time, 40 min. Under these conditions, the COD removal rate reached 78.6%, the BOD /COD value increased from 0.168 to 0.353-0.403, and the biodegradability was greatly improved. If Ho is added in three times and the interval time is 10min, the COD removal rate will increase from 78.6% to 80.3%. Therefore, it can be seen that H0: batch addition will further improve the reaction effect. After Fenton oxidation treatment, wastewater and activated carbon adsorption, this topic activated carbon adsorption experiments using single factor method, examines different PH, activated carbon adsorption dosing quantity and the influence of adsorption time of wastewater COD removal rate, the results show that after Fenton oxidation treatment without having to adjust PH value, according to the 20 g/L after adding the activated carbon reaction 3 h at room temperature, COD removal rate was 47.3%,, BOD/COD value of 0.438 to 0.625. The research in this paper has laid a theoretical foundation and provided an experimental basis for the practical application of Fenton oxidation and activated carbon adsorption in the pretreatment of natural gas purification maintenance wastewater in UASB reactor. 
Ding Xinda activated carbon pigment02022-01-17 23:33:33
1. Activated carbon treatment of wastewater containing chromium. Chromium is a kind of metal raw material used in electroplating. The hexavalent chromium in wastewater exists in different forms with different pH values. Activated carbon has a very developed microporous structure and high specific surface area, has a strong physical adsorption capacity, can effectively adsorb Cr (V) in wastewater. There are a large number of oxygen-containing groups on the surface of activated carbon, such as hydroxyl (-OH), carboxyl (-COOH), etc., which all have the function of electrostatic adsorption and produce chemical adsorption on Cr (VI). It can be completely used to treat Cr (VI) in electroplating wastewater, and the adsorbed wastewater can meet the national discharge standard. The results showed that when the mass concentration of Cr (VI) in the solution was 50mg/L, pH=3 and adsorption time was 1.5h, the adsorption performance and Cr (VI) removal rate of activated carbon reached the best effect. Therefore, the process of treating wastewater containing chromium by activated carbon is the result of the comprehensive action of physical adsorption, chemical adsorption and chemical reduction of Cr (VI) in solution by activated carbon. Activated carbon treatment of wastewater containing chromium has stable adsorption performance, high treatment efficiency, low operating cost, and certain social and economic benefits. 2. Treatment of cyanide-containing wastewater with sexual carbon. In industrial production, cyanide or by-product cyanide is used in the wet extraction of gold and silver, the production of chemical fiber, coking, synthesis of ammonia, electroplating, gas I production and other industries, so a certain amount of cyanide-containing wastewater must be discharged in the production process. Activated carbon has been used to purify wastewater for a long time and there are more and more reports on its application in the treatment of cyanide-containing wastewater. However, due to the small adsorption capacity of CN_ and HCN on activated carbon, which is generally 3mgCN/ GAC --8mgCN/ GAC depending on the variety, it is not cost-effective in the treatment cost. 3. Activated carbon treatment of wastewater containing mercury. Activated carbon has the ability to adsorb mercury and mercury-containing compounds, but its adsorption capacity is limited, and it is only suitable for treating wastewater with low mercury content. If the concentration of mercury is high, it can be treated by chemical precipitation method first. After treatment, the mercury content is about 1mg/L, and it can reach 2-3mg /L when high, and then further treatment with activated carbon. 4. Activated carbon treatment of phenol-containing wastewater. Phenol-containing wastewater is widely sourced from petrochemical plants, resin plants, coking plants and oil refining and chemical plants. The experimental results show that the activated carbon has a good adsorption performance for phenol, but the increase of temperature is not conducive to adsorption, so that the adsorption capacity is reduced. But the time to reach adsorption equilibrium is shortened by increasing the temperature. The optimum values of the amount of activated carbon and the adsorption time were found, and the removal rate changed little under acidic and neutral conditions. Under the condition of strong alkalinity, the removal rate of phenol decreased sharply, the stronger the alkalinity, the worse the adsorption effect. 
Activated carbon ding Xinda sales02021-10-23 02:37:28
Chapter 1 This project adopts the company's own large amount of monolayer stone which can be dried and preserved and treated with solution Preparation method of graphite namely graphene.granular activated charcoal  Raw materials are commonly used graphite and common chemicals, easy to operate, easy to enlarge. It solves the problem that graphene materials are expensive and cannot enter the field of industrial application without large-scale production. It provides a basis for large-scale application of graphene.Using the super conductivity and large specific surface area of graphene solves the problem that the traditional activated carbon material can no longer improve the electric storage performance when used on the electrode. Complete set of equipment in addition to solve the industrial method of graphene liquid phase composite to activated carbon materials for super capacitor, and can be activated activated carbon materials at room temperature. Complete sets of equipment meet the requirements of cleaner production. coal activated carbon supplier  
Ding Xinda activated carbon price02021-12-28 21:33:18
The treatment of organic waste gas mainly includes two categories: recovery method and elimination method.The main recovery technologies of organic waste gas include: adsorption method, absorption method, condensation method, membrane separation technology and pressure swing adsorption technology.Organic waste gas elimination technology can be divided into two categories: physical - chemical method and biological method.activated carbon for gold recovery  Physical - chemical methods include thermal destruction, photodecomposition, corona, ozone decomposition, etc.Biological methods include biological filter, biological drip filter, biological scour tower, membrane bioreactor, activated sludge process, etc.The purification rate of activated carbon adsorption method can reach more than 95%, if there is no regeneration device, the operation cost is too high, if the steam recovery, the process is too long, the operation cost is high, the recovery of solvent and water mixture utilization value is not high;Regeneration needs a stable steam source, and the adsorption capacity of activated carbon after repeated adsorption and desorption will gradually reduce, generally use two or three years after the replacement.The purification rate of liquid absorption method is only 60%-80%, and there are secondary pollution problems. The purification rate of catalytic combustion method can reach 95%, but it is suitable for the treatment of high concentration, small air volume and high exhaust gas temperature of organic waste gas, and the gas temperature is higher, in order to improve the exhaust gas temperature, it needs to consume a lot of energy.The most used method is a catalytic combustion method, adsorption, it mainly particles or honeycomb carbon as adsorbent, to ensure the continuity of production, generally set up two adsorption bed used interchangeably, as a result of the switching cycle at least for ld, so adsorption bed volume big, adsorbent dosage, heavy equipment, large investment, operation trouble;As the bed volume is large, it is easy to appear the combustion and explosion caused by the accumulation of adsorption heat.To solve these problems, the adsorber of the existing new device adopts a multi-unit shunt combination structure, and uses a new material -- activated carbon fiber as adsorbent 
Ding Xinda activated carbon price02021-12-13 23:00:52
These changes more or less to the original system and production process caused a certain impact, these new problems caused by the change of raw materials must be solved, to ensure the production of efficient and stable operation.activated carbon gold mining  In view of the characteristics of large amount of matter and high content of benzene organic matter in gas, the method of removing these substances is studied and the solution is given. In this study, the concentration of benzene, naphthalene and ash in gas before purifying feed-gas compressor was determined by chromatograph, picric acid titration and weighing method respectively. According to the measured values, the experimental flow was designed, and coke column and activated carbon column were made by themselves. The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples.The adsorption effluent curve of benzene by activated carbon was plotted.activated carbon company  The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied. The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions. 
Ding Xinda activated carbon price02021-12-13 23:00:10
The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples.The adsorption effluent curve of benzene by activated carbon was plotted.activated carbon wholesale   The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied.activated carbon for gold recovery  The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions. At the same time, the filtration and adsorption properties of coke were tested. The experiment shows that the adsorption performance of the test coke on benzene is very weak, can not be used as the nitrogen adsorbent, but the coke filter and adsorption performance of ash and naphthalene is very good, the content of naphthalene and ash after the gas through the coke column completely meet the design requirements. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions