Activated carbon anthracite raw material with price related questions

Asked by
Activated carbon anthracite raw material with price02022-01-13 22:47:09
The polishing slurry and processing technology of micro-abrasive slurry jet were studied.activated carbon manufacturers uae Through the analysis of the physical and chemical properties of additives and their state changes under the jet, the comprehensive effects of the types and proportions of different additives, as well as the types, proportions and particle sizes of abrasive on the formation of uniform slurry, the promotion of good abrasive dispersion and the jet polishing effect were  The effects of different types of nozzles, polishing slurry, jet distance, jet time, different initial RA, jet pressure and jet Angle on the surface profile, material removal depth and surface quality of the workpiece were studied through polishing experiments. 
Activated carbon anthracite series02022-01-14 23:00:35
In order to verify the accuracy of the simulation calculation, two 12g activated carbon bags thickness of activated carbon ~ 1.5cm) were put into the container containing uranium ore, and then taken out after radon adsorption for 30 min and 85 min. After continuous measurement, the change curve of total Y number of activated carbon over time could be adsorption onto activated carbon  According to the adsorption duration used in the experiment and the appropriate value of n (in the calculation process, when the adsorption duration is 30 min, n=480activated carbon manufacturers uae  When the adsorption time is 85 min, take n-600), and the calculated theoretical curve is shown in FigureIt can be seen from the figure that the measured curve is in good agreement with the theoretical curve.Fig. 2 is the simulation result of the total number of Y taken out over time after activated carbon adsorbs 1 radon atom from the environment every second and continues to adsorb for 3 days.After the activated carbon was taken out, the total number of V reached the maximum after t time, and then the total number became smaller. After about 50 min, the total number of V decreased by a negative exponential function. The curve can be divided into a stationary area and a measuring area. The width of the stationary area (i.e. the duration of the stationary area) is set at (t+50) min, followed by the measuring area. There is no obvious rule of counting in the standing zone. Should be avoided during this period of time.Total number of;The measurement area is counted 
Activated carbon anthracite raw materials with prices and manufacturers02022-01-13 22:50:37
F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. gold adsorption onto activated carbon  The adsorption capacity of activated carbon on each gas (unit: mL /cm3):H2, O2, N2, CI2, CO2 4.5, 35, 11, 494, 97 The main factors affecting the adsorption of activated carbon ① the nature of activated carbon adsorbent The larger the surface area, the stronger the adsorption capacity; Activated carbon is a non-polar molecule, easy to adsorb non-polar or very low polarity adsorbentactivated carbon manufacturers uae   The size of the activated carbon adsorbent particle, the structure and distribution of the fine pore and the surface chemical properties also have a great influence on the adsorption. (2) the nature of the adsorbent Depends on its bath solubility, surface white energy, polarity, adsorbate molecule size and unsaturation, the concentration of adsorbate, etc ③ Wastewater pH value Activated carbon generally has a higher adsorption rate in acidic solution than in alkaline solution. The pH value will affect the state and bath solubility of the adsorbent in the water towel, thus affecting the adsorption effect. ④ Coexisting substances When a variety of adsorbates coexist, the adsorption capacity of activated carbon to a certain adsorbate is worse than that containing only the adsorbate (5) temperature The effect of temperature on the adsorption of activated carbon is small 
Ding Xinda activated carbon anthracite raw materials and prices02022-01-13 22:48:03
Electrochemical modification is to change the electrical and chemical properties of activated carbon surface by using micro electric field, so as to improve the adsorption selectivity and performance.It does not need to add chemical agents, does not need to heat, does not cause pollution to the environment, low energy consumption, only a few hundred millivolts, easy to operate.The results show that the adsorption equilibrium of activated carbon is dependent on the electric potential: the adsorption amount of activated carbon increases with the increase of the potential, and the adsorption speed is accelerated;Arpolarity polarization is beneficial to the adsorption of chloroform by activated carbon, while cathodic polarization inhibits the adsorption of chloroform by activated carbon 3-341]. Activated carbon heteroatom carrier and compound modificationActivated carbon has very high stability and good activity, these two basic properties become the activated carbon as a catalyst or catalyst carrier conditions.By introducing certain heteroatoms and compounds on the surface of activated carbon by liquid phase deposition, the adsorption performance of activated carbon can be increased by using the binding effect between these substances and adsorbents.compounds, which has the advantages of increasing the reaction rate and increasing the adsorption capacity.Yang Quanhong et al. 'Using FESO;Activated carbon material was adsorption on activated carbon  The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon. 
Activated carbon raw material02021-11-21 19:03:31
norit granular activated carbon There are two types of air pollutants: particulate matter and gaseous matter, among which gaseous pollutants account for the main part, accounting for more than 75% of the pollutants discharged into the atmosphere worldwide every year. Gaseous pollutants are divided into inorganic pollutants and organic pollutants.In terms of species, organic pollutants account for the vast majority.Of the 25 gases listed by the U.S. Environmental Protection Agency (EPA) as toxic There are two types of air pollutants: particulate matter and gaseous matter, among which gaseous pollutants account for the main part, accounting for more than 75% of the pollutants discharged into the atmosphere worldwide every year. Gaseous pollutants are divided into inorganic pollutants and organic pollutants.In terms of species, organic pollutants account for the vast majority.Of the 25 gases listed by the U.S. Environmental Protection Agency (EPA) as toxic emissions, 18 are organic.These 18 kinds of organic matter account for 74.2% of toxic gas emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes. coal based granular activated carbon 
Activated carbon material02021-12-27 22:34:52
The industrial and industrial production of graphene with low cost and large output can be completed, which will greatly promote the development of downstream industries. Using graphene's remarkable physical and chemical properties, electrons can travel through graphene much faster than they can through silicon, creating more sensitive sensors, electronic components, displays, solar cells and hydrogen storage devices. Pacific Northwest National Laboratory and Princeton University are working with a private company to develop a high-capacity, fast-charging battery. The secret is to add graphene to lithium-ion batteries to improve power and cycle stability. Researchers at Stanford University say graphene-based lighting could be cheap and environmentally friendly. Graphene-based LECs could replace metal-based OLEDs(organic light-emitting diodes). They could also replace traditional metal-based graphite electrodes in lamps, making them cheaper and easier to recycle. Researchers in China found that bacterial cells on graphene paper were unable to grow, while human cells were not damaged. Take advantage of this by making bandages, food wrappers and even antibacterial t-shirts. The scientific community is paying close attention to the research progress of graphene, this amazing material once put into practice will bring revolutionary changes to human society. activated carbon company 
Activated carbon raw material02021-11-21 21:48:43
Physical method is to use carbon dioxide, water vapor or the mixture of both as activator, the carbonized carbon material and gas in the activation furnace at 500~1200℃ for carbon activation reaction, so that the pore size of the carbonized material to expand, the formation of activated carbon with porous microcrystalline structure.Gas activation method mainly includes carbonization and activation engineering.The so-called carbonization, refers to the low temperature (about 500℃) is small, the volatile coal tar molecules in the material and the thermal decomposition and curing process of asphalt, that is, to remove the volatile in advance, made suitable for the next step of activation with carbonization.granular activated carbon  When the temperature is below 600℃, the specific surface area of carbonized material increases with the increase of temperature.When 600~900℃, the specific surface area reaches a certain value: 250~300 m2/g; when above1000℃, the specific surface area shrinks rapidly. When the carbonization temperature is above 800℃, the reaction performance of carbonized compounds and activation gas gradually becomes weaker, so the carbonization temperature is generally below 1000℃. However, if the residual volatile content and thermal effect are taken into account, the most suitable temperature should be 600~700℃39].coal based granular activated carbon norit   The carbonized substance obtained from the carbonization process is placed in water vapor or a mixture of water vapor and combustion gas and heat treated at 800~1000℃, which is called the activation process. The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method. Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. 
Activated carbon material02022-01-19 23:11:16
Its adsorption is selective, and non-polar substances are easier to be adsorbed than polar substances.In the same series of substances, the higher the boiling point of the substance, the more tolerantEasy to be adsorbed, the greater the pressure, the lower the temperature, the greater the concentration, the greater the amount of adsorption.On the contrary, decompression and heating are beneficial to gas desorption.It is often used for gas adsorption,Separation and purification, recovery of solvents, decolorizing agents for sugar solution, grease, glycerin, medicine, deodorant for drinking water and refrigerators, filter agent for gas masks,It can also be used as a catalyst or metal salt catalyst carrier.Early production of activated carbon raw materials for wood, hard nut shell or animal bones, later mainly used coal, after dryingDistillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃.gold adsorption onto activated carbon  ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. activated carbon manufacturers uae 
Activated carbon raw material02021-11-23 00:16:32
Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent. The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. The kinetic activity value of adsorbent is the main basis for the design of adsorption system.  The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps  (1) External diffusion, the adsorbate from the main air flow through the air film around the particles to the outer surface of the adsorbent; (2) Internal diffusion, the adsorbate from the outer surface through micropores to the surface of the adsorbent micropores (3) adsorption, the adsorbent reached the microporous surface of the adsorbent is adsorbed (4) The desorbed adsorbate diffuses to the main body of the gas phase through internal and external diffusionPhysical adsorption process is generally controlled by internal and external diffusion, chemical adsorption is controlled by both surface dynamics and internal and external diffusion.Because of the complexity of the adsorption process and many influencing factors, it is difficult to derive the rate theoretically, so it is generally determined by experience or model experiment. 
Activated carbon material02022-02-09 23:10:01
The selection of treatment technology should be based on the gas volume, purification requirements, the possibility of recovery, the economy of equipment construction and operation and other conditions. Special attention should be paid to the close cooperation with the process in practical work, so as to achieve comprehensive utilization as far as possible. powdered activated carbon (pac)  At present, there are three common methods of organic waste gas treatment at home and abroad: liquid absorption method, activated carbon adsorption method and catalytic combustion method.The purification efficiency of liquid absorption method is 60%~ 80%, which is suitable for treating low concentration and large volume of organic waste gas, but there are secondary pollution.activated carbon manufacturers   The purification rate of catalytic combustion method is 95%, which is suitable for the treatment of high concentration and small air volume organic waste gas. The disadvantage is that it has strict requirements on the treatment object and requires high gas temperature. In order to improve the exhaust gas temperature, it needs to consume a lot of fuel, so the operation cost is very high. 
Activated carbon material02021-12-24 19:50:03
Raw materials are commonly used graphite and common chemicals, easy to operate, easy to enlarge. It solves the problem that graphene materials are expensive and cannot enter the field of industrial application without large-scale production. It provides a basis for large-scale application of graphene.Using the super conductivity and large specific surface area of graphene solves the problem that the traditional activated carbon material can no longer improve the electric storage performance when used on the electrode. Complete set of equipment in addition to solve the industrial method of graphene liquid phase composite to activated carbon materials for super capacitor, and can be activated activated carbon materials at room temperature. Complete sets of equipment meet the requirements of cleaner production. Chapter 2 The quality of graphene prepared by this project is guaranteed.activated carbon gold mining  The graphene prepared by white has a high monolayer rate (up to 99%), fewer defects, and can be dried for a long time. Can be prepared into a variety of solutions to facilitate compounding with other materials. Raw material is natural graphite from a wide range of sources, is prepared by industrial methods can be scaled up production. To make the industrial application of graphene possible, promote the advancement of high-tech materials, and promote industrial development.activated carbon company  Chapter 3 Graphene-modified activated carbon for supercapacitor has good technical performance:Long cycle life, graphene modified ultracapacitors mountain in its storage process does not produce chemical reaction, the energy storage process is reversible, no "memory effect", can be repeated charge and discharge hundreds of thousands of times, 500 times that of corrosion ion batteries, nickel-metal hydride and nickel cadmium battery is 1000 times, if the ultracapacitors charge-discharge 20 times a day, continuous use of up to 68 years: High efficiency: super current discharge capacity, high energy conversion efficiency, small process loss, high current energy cycle efficiency ≥90%. 
Activated carbon material02022-02-09 23:26:49
Science and the project feasibility study report based on the in-depth market supply and demand analysis, the future price forecasting, the resources supply, construction scale, process route, equipment selection, environmental impact, energy conservation and emissions reduction, investment estimation and fund-raising, profitability and other aspects of scientific research, from the Angle of market, technology and economy, engineering project study and comparative analysis, and after the completion of the project have made the financial, economic and social environment for scientific forecast, for the project decision-making provides a fair and reliable, scientific investment advice. activated charcoal suppliers & manufacturers  "Activated carbon production and construction project" belongs to zhoukou xyz co., ltd. plans in zhoukou economic development zone (new) projects, proposed the project the total area of 25072.53 square meters about 37.59 acres), is expected to total investment of 95.0984 million yuan, including: investment in fixed assets of 83.8144 million yuan, flow capital of 11.284 million yuan, is expected to comprehensive income for 94.17 million   The economic situation this year is generally characterized by a steady but positive trend, and more positive changes have taken place in economic development. Stability is reflected in the fact that the economy performed within an appropriate range, growth became more stable, and the quality and performance of the economy continued to improve. The economic structure has continued to improve. Innovation is playing an increasingly important role in underpinning development. The service sector accounts for a larger share of the economy, and consumption is contributing more to growth. Stability is also reflected in new breakthroughs in reform and opening up. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions