Ding Xinda activated carbon block related questions

Answers
Asked by
Updated
Ding Xinda activated carbon block02021-12-22 23:40:43
Activated carbon (AC) is a kind of porous carbon material with developed pore structure and large specific surface area, which is prepared by using biological organic matter (such as wood, coke, petroleum coke, coal and various nut shells, etc.). It is a kind of high quality adsorbent.activated carbon pellets wholesale   With the development of industry, its application is more and more extensive.www.powdered-activated-carbon.com  At present, it has been widely used in the field of environmental protection, food industry and medicine. The granular activated carbon with high strength was prepared by heating wood phosphate mixture at low temperature and using tar generated during its pyrolysis as binder. In this paper, the process conditions and plasticizing mechanism of granular activated carbon prepared by phosphoric acid were studied, which provided scientific data and theoretical basis for the preparation of high strength granular activated carbon. Fir chip as the raw materials, H - POs as activator, using single factor analysis and orthogonal experimental design method, this paper discusses the influence granular activated carbon pore structure and the iodine adsorption value, methylene blue and strength of various preparation factors, determine the optimum process conditions of preparation of granular activated carbon phosphoric acid, phosphoric acid concentration is 70%, dipping 180%, kneading temperature is 170 ℃, for 60 min kneading time, activation temperature is 350 ℃, the activation time of 210 min. The iodine adsorption value, methylene blue adsorption value, strength and BET specific surface area of GAC were 1020.04mGG, 225mg/g, 88.73% and 1486.48m2/g respectively. The experimental results show that the impregnation ratio and carbon activation temperature have great effects on the adsorption performance of GAC, while the kneading temperature and impregnation ratio have great effects on the strength of GAC. Because the strength of GAC decreases with the increase of impregnation ratio, and the decrease range is large, so the preparation of GAC with compound activator is proposed. The results show that the composite activator can reduce the impregnation ratio of phosphoric acid to wood chips and improve the strength of granular activated carbon. At the same time, the composite activator can improve the adsorption performance of GAC. Therefore, granular activated carbon with good adsorption performance and high strength can be prepared by this method. 
Ding Xinda activated carbon carbon adsorption and carbon principle02021-11-29 22:41:57
② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. gold coconut shell activated carbon  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
Ding Xinda activated carbon value02021-12-29 21:32:21
At present, the organic pollution of drinking water source is relatively serious. The organic pollutants themselves are not only highly toxic, but also may generate halogenated disinfection by-products (DBPs) after chlorination disinfection. Meanwhile, the existence of organic compounds will reduce the biological stability of drinking water and lead to the secondary reproduction of microorganisms in the pipe network. Therefore, it is important to reduce the content of organic pollutants in drinking water. Conventional water treatment process has low removal efficiency for organic pollutants, so it is imperative to seek economic and efficient treatment technology. On the basis of giving full play to the advantages of ozone oxidation to remove organic matter, ozone catalytic oxidation technology can induce the formation of highly oxidizing hydroxyl radical (-Oh), which can effectively remove trace organic pollutants that are difficult to degrade in water and reduce the content of ozone oxidation by-products. It is a kind of water treatment method with great prospect.activated carbon for gold recovery  Laboratory studies have shown that ceramic honeycomb activated carbon catalytic ozone oxidation technology and removal of trace organic matter in water has more obvious advantages, but the catalytic oxidation and active carbon process characteristics to be in-depth study, therefore the pilot was investigated through honeycomb ceramic catalytic ozonation and activated carbon catalytic ozonation and activated carbon filter combination process operation characteristics. activated carbon wholesale 
Ding Xinda activated carbon use02021-12-22 00:10:48
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.activated carbon for gold recovery  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption apparatus.activated carbon wholesale  For the gas phase adsorption, the size of the gas molecules is usually less than 1. ONM, the use of microporous activated carbon; For liquid-phase decolorization refining, due to the large size of the liquid molecules, it is necessary to use activated carbon with developed mesopore. Activated carbon has a large specific surface area and a particularly developed micro-pore structure, which is the main reason for its strong adsorption capacity and large adsorption capacity. 
Ding Xinda activated carbon use02021-12-13 00:44:20
2.1.3 Determination of ash content. Put 150mL porcelain cyanosis pot in muffle furnace, burn it at (65020) "℃ to constant weight, put the cyanosis pot in dryer, cool and weigh; Weigh 5 grams of the crushed sample (approximately 0.1mg) and place it in 150mL porcelain coating that has been burned to constant weight; Put Zengtan into a muffle furnace whose temperature does not exceed 300℃, open the cyanosis cap, and gradually increase the temperature to a constant weight at 650 ℃ 20℃. It takes about three hours. Calculate ash value and get ash content.activated carbon for gold recovery  2.1.4 Determination of methylene blue adsorption value. The crushed sample was weighed with 1.0 grams (approximately to 1mg) and placed in a 100mL grinding stopper conical flask. An appropriate amount of methylene blue test solution was added with an eyedrot. The filtrate was placed in a colorimetric dish with a light diameter of LCM, and the absorbance was measured with a spectrophotometer at a wavelength of 665nm. The absorbance was compared with the absorbance of the standard cupric sulfate filter. The number of ml of methylene blue test solution consumed was the methylene blue adsorption value of the sample. activated carbon wholesale  
Ding Xinda activated carbon understanding02021-12-08 22:40:24
By use.Generally there are three kinds. (1) gas phase adsorption of activated carbon. Can be used for exhaust treatment, air purification, solvent recovery, gas separation, deodorization, desulfurization and denitration, industry.Raw material gas refining, gas chromatography filler, air sampler, fresh-keeping, ozone removal, cigarette filter nozzle, gas adsorption storage, military and civil gas masks, etc.(2) liquid phase adsorption of activated carbon.Tap water treatment, pure water manufacturing, industrial and domestic sewage advanced treatment, decolorization refining, blood purification, gold recovery, double capacitor electrode, pharmaceutical carbon, etc.(3) catalyst (catalyst) with activated carbon. activated carbon for gold recovery  Both can be directly used as a catalyst for this industrial process (such as phosgene synthesis, synthesis of vinyl acetate, etc.), more time activated carbon is used as a catalyst carrier (such as carrying precious metal pins, men, palladium, nails, gold made of pin carbon, palladium carbon catalyst, etc.).(1) solvent recovery.Such as recycling printing industry with xylene, toluene, benzene and other solvents;Recycling organic solvents such as ethanol, acetone, ester and ether from plastics and artificial leather industry;Recycling of hexanone in tape factory;Recycling of dichloromethane from resin processing plants, etc.(2) air purification.Such as electronic, pharmaceutical industry aseptic workshop air purification;Removal of ozone in the air of the copy room and computer room;The removal of foreign odor in the air of confined space;Odor removal from refrigerators, etc.(3) Nuclear and biochemical protection.Nuclear radiation, biological warfare agents, chemical warfare agents are weapons of mass destruction, activated carbon is loaded with a variety of chemical agents can effectively protect it Activated carbon or chemical-loaded activated carbon is often used as a key component of personal protective equipment in the presence of toxic gases in the civilian industry. During the SARS crisis in late 2002 and early 2003, special protective masks with activated carbon loaded with silver played a role in protecting health care workers.  activated carbon for gold recovery 
Ding xinda activated carbon center02021-07-29 22:56:48
Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gasescoal based granular activated carbon  Medical treatment and biological engineering: can be used for the manufacture of artificial kidney, liver adsorbent, used in biological engineering for enzyme fixation; https://www.granular-activated-carbon.com  Daily life: can be used in refrigerator deodorization, fruit and vegetable preservation, household water purifier, cigarette filter, deodorization and disease prevention insoles and other daily necessities production;Other aspects: can be used as catalyst carrier, stationary phase of gas chromatography, solar heat collector and precious metal production 
Ding Xinda activated carbon insoluble02021-10-26 22:56:50
The effect of the amount and adding method of activated carbon on smoke emission of cigarettes was investigated. It was found that the filtration efficiency of ternary compound filter was higher than that of binary compound filter under the influence of plasticizer when the amount of activated carbon was constant. With the increase of the amount of activated carbon, the filtration efficiency of the two kinds of composite filters increases. The effects of the amount of activated carbon on the filtration efficiency of the compounds with different volatiles are different. The effects of the amount of activated carbon on the filtration efficiency of the isomers are similar due to their close molecular weight and boiling point. When the dosage is small, the competitive adsorption is easy to occur. The adsorption amount of refractory components such as acetaldehyde is small, and the competition can be reduced by increasing the dosage. The filtration efficiency of refractory components shows an obvious upward trend with the increase of the dosage. It was found that the contents of volatile compounds and flavor components were related to the type of cigarettes and the amount of tar. The contents of volatile compounds and flavor components were higher in the flue-cured cigarettes than in the mixed cigarettes, and higher in the high tar cigarettes than in the low tar cigarettes. The types of fragrance components in smoke of different types of cigarettes are basically the same, but there are great differences in content. The contents of furfural, furfuryl alcohol, maltol, 5-hydroxymethylfurfural, linolenic acid, methyl linolenic acid, linoleic acid, methyl palmitate and other components in flue-cured cigarettes were significantly higher than those in mixed cigarettes. This is related to the higher carbohydrate content in flue-cured cigarettes. Mixed-type cigarettes contain high content of 3-methylpentanoic acid and nitrogen heterocyclic compounds such as cotinine, ho ah, and methamine due to their formulations of burley tobacco and spice tobacco. The filtering law of activated carbon for different types of cigarettes is basically the same, that is, the filtering efficiency is related to the properties of compounds, especially with the molecular weight and boiling point of compounds. The filtration efficiency of activated carbon on flue-cured cigarettes was lower than that of mixed cigarettes. 
Ding Xinda activated carbon sales02021-12-17 23:01:03
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.activated carbon for gold recovery  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. activated carbon wholesale 
Ding Xinda activated carbon solvent02021-12-17 23:14:06
 www.powdered-activated-carbon.com cIn painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.activated carbon pellets wholesale  emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes. In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc. 
Ding Xinda activated carbon use and development02021-09-02 00:06:05
Activated carbon adsorption, is the use of activated carbon on the solid surface of the water adsorption or a variety of substances, in order to achieve the role of water purification. The adsorption of activated carbon is produced in two aspects.One is that the molecules inside the activated carbon are subjected to equal forces in all directions while the molecules on the surface are subjected to uneven forces.This makes other points adsorbed on its surface, which is physical adsorption;The other is due to the chemical action between activated carbon and adsorbed substances, which is chemical adsorption.The adsorption of activated carbon is the result of the comprehensive action of the above two kinds of adsorption.https://www.granular-activated-carbon.com  When the adsorption speed and desorption speed of activated carbon in the solution is equal, that is, the number of activated carbon adsorption is equal to the number of desorption, the concentration of the adsorbed material in the solution and the concentration on the surface of activated carbon are no longer intermingled, that is, to achieve the balance, the dynamic balance at this time is called activated carbon adsorption balance. coal based granular activated carbon  Adsorption capacity refers to the amount of adsorbents adsorbed on the adsorbent per unit mass under certain conditions. It is usually expressed in terms of K adsorbents /kg of adsorbent or mass percentage, which is a sign of the adsorption capacity of the adsorbent. In industry, the amount of adsorption is called the activity of the adsorbent. The activity of the adsorbent can be expressed in two ways :(1) the static activity of the adsorbentUnder certain conditions, the equilibrium adsorption capacity of the adsorbent is its static activity.For a certain adsorption system, the static activity depends only on the adsorption temperature and the concentration or partial pressure of the adsorbed substance. Dynamic activity of adsorbents 
Ding Xinda activated carbon price02021-12-28 21:37:37
(1) According to the relevant national standards, the sludge of Liede Sewage Treatment Plant is mainly composed of volatile organic compounds, with a volatile content of 64.86%, which can be used as the main raw material for the preparation of activated carbon.(2) Without adding additives to the sludge, the concentration of sulfuric acid and zinc chloride is 4 mol·L' and the volume ratio is 2:1. The activated carbon prepared has the maximum iodine adsorption value of 549.6 mg·g 'and the yield of 51.3%, which is the better carbon sample prepared by pure sludge and is recorded as SAC.which was recorded as PAC;By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperature >Is the activator concentration >Pyrolysis time >activated carbon for gold recovery  Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbon;The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure.activated carbon wholesale  SEM analysis showed that the surface pores of commercial activated carbon were microporous and relatively uniform, while the surface of SAC and PAC presented irregular porous structure. XRD analysis showed that the commercial activated carbon was amorphous carbon, SAC and PAC were microcrystalline carbon with hexagonal shape structure 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions