How to make better granular activated carbon related questions

Answers
Asked by
Updated
How to make better granular activated carbon02021-12-21 18:08:54
For the gas phase adsorption, the size of the gas molecules is usually less than 1. ONM, the use of microporous activated carbon; For liquid-phase decolorization refining, due to the large size of the liquid molecules, it is necessary to use activated carbon with developed mesopore. activated carbon for gold recovery  Activated carbon has a large specific surface area and a particularly developed micro-pore structure, which is the main reason for its strong adsorption capacity and large adsorption capacity. In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties.activated carbon wholesale  Chemical method in addition to a certain microporous, macroporous, there are more mesopore (transition hole), so more suitable for the application of liquid phase, adsorption of larger points · sub material, such as sugar solution has a very good decolorization effect; When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements. 
How to make better granular activated carbon02021-12-07 22:41:23
The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method.activated carbon for gold recovery  Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. activated carbon wholesale 
How to make better granular activated carbon02021-12-07 19:34:58
These changes more or less to the original system and production process caused a certain impact, these new problems caused by the change of raw materials must be solved, to ensure the production of efficient and stable operation.activated carbon wholesale  In view of the characteristics of large amount of matter and high content of benzene organic matter in gas, the method of removing these substances is studied and the solution is given. activated carbon for gold recovery  In this study, the concentration of benzene, naphthalene and ash in gas before purifying feed-gas compressor was determined by chromatograph, picric acid titration and weighing method respectively. According to the measured values, the experimental flow was designed, and coke column and activated carbon column were made by themselves. The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples. The adsorption effluent curve of benzene by activated carbon was plotted. The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied. The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions. At the same time, the filtration and adsorption properties of coke were tested. The experiment shows that the adsorption performance of the test coke on benzene is very weak, can not be used as the nitrogen adsorbent, but the coke filter and adsorption performance of ash and naphthalene is very good, the content of naphthalene and ash after the gas through the coke column completely meet the design requirements. The results show that the combined use of coke and activated carbon in the gas system can completely achieve the purpose of removing benzene, naphthalene and ash. According to the above research results, a coke filter was designed. The application of the equipment solved the problems that the feedstock gas compressor in the urea blackening unit could not run for a long period due to the vibration caused by the scaling of the rotor, the blockage of the flow channel and the problems that the naphthalene formation in the heat exchanger affected the heat transfer effect. 
How to make better granular activated carbon02021-04-27 00:12:37
By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperatureIs the activator concentration Pyrolysis time >Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbonactivated carbon company  The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure. Distillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃. ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on.www.coconutactivatedcarbon.com  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
How to make better granular activated carbon02021-09-02 00:17:08
Microwave method, microwave method is not independent of the physical method and chemical method of the preparation of activated carbon, but on the basis of the physical method and chemical method instead of the traditional heating method, but it has a very significant effect. activated charcoal pellets Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent. The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. The kinetic activity value of adsorbent is the main basis for the design of adsorption system.activated charcoal pellets  The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps 
How to make better granular activated carbon02021-04-27 19:54:52
The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method.activated charcoal powder wholesale uk  Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc.yrd activated charcoal  The main principle of chemical activation method is the raw materials in 0.5~5 times the chemical activator impregnation for a certain time, in the process of heating, because of the dehydration of chemicals, the H and О elements in the raw materials in the form of water vapor released, the results produced a developed porous structure of activated carbon.The method requires the oxygen content in the raw material.25%, hydrogen content ≥5%[4], and most of the materials that can meet the requirements of this index are rice husk, wood and coal, etc 
How to make better granular activated carbon02021-12-07 19:06:13
Chapter 1 This project adopts the company's own large amount of monolayer stone which can be dried and preserved and treated with solution activated carbon for gold recovery  Preparation method of graphite namely graphene.activated carbon wholesale  Raw materials are commonly used graphite and common chemicals, easy to operate, easy to enlarge. It solves the problem that graphene materials are expensive and cannot enter the field of industrial application without large-scale production. It provides a basis for large-scale application of graphene.Using the super conductivity and large specific surface area of graphene solves the problem that the traditional activated carbon material can no longer improve the electric storage performance when used on the electrode. Complete set of equipment in addition to solve the industrial method of graphene liquid phase composite to activated carbon materials for super capacitor, and can be activated activated carbon materials at room temperature. Complete sets of equipment meet the requirements of cleaner production. Chapter 2 The quality of graphene prepared by this project is guaranteed. The graphene prepared by white has a high monolayer rate (up to 99%), fewer defects, and can be dried for a long time. Can be prepared into a variety of solutions to facilitate compounding with other materials. Raw material is natural graphite from a wide range of sources, is prepared by industrial methods can be scaled up production. To make the industrial application of graphene possible, promote the advancement of high-tech materials, and promote industrial development. 
How to make better granular activated carbon02021-04-28 20:33:57
The polishing slurry and processing technology of micro-abrasive slurry jet were studied. fused alumina wholesale distributors  Through the analysis of the physical and chemical properties of additives and their state changes under the jet, the comprehensive effects of the types and proportions of different additives, as well as the types, proportions and particle sizes of abrasive on the formation of uniform slurry, the promotion of good abrasive dispersion and the jet polishing effect were explored. The effects of different types of nozzles, polishing slurry, jet distance, jet time, different initial RA, jet pressure and jet Angle on the surface profile, material removal depth and surface quality of the workpiece were studied through polishing experiments. The local Ra of the optical glass surface is in the range of 20nm~50nm by MASJP, and the lowest Ra is 10.24nm.hsl abrasives   1. Combined with Zeta potential, sedimentation experiment, viscosity measurement and other methods, the influence of various dispersants on CEO and slurry suspension effect was studied. The results showed that the formula with good stability was the appropriate concentration of mixed dispersant (NAP +SBN) or (NAP +PAM+SBN). 2. The removal rate of CEOZ slurry prepared with mixed dispersant (NAP +PAM+SBN) in the processing of K9 glass by MASJP was higher than that of other mixed dispersants. By comparing the processing effect of MASJP with and without mixed additives, it is found that the processing effect of MASJP with mixed additives (NAP +PAM+SBN) has higher surface quality, which can significantly reduce the interface area between the polished area and the unpolished surface and increase the smooth surface as much as possible.3. Combining online observation and single factor method, the formation process of the surface features of the polished area was studied. The experimental results showed that the surface morphology of the polished area showed a W-shaped bowl structure in the vertical jet machining, and an eccentric bowl structure in the crescent shape in the oblique jet machining.Compared with the abrasive water jet machining effect, it is found that the W shape and crescent shape characteristics of the polishing region of MASJP are relatively flat, the smooth surface is larger and the surface quality is higher. 4. When applying nozzle with different outlet shapes in MASJP, it is found that the fluid ejected from the cylindrical nozzle flows out along the direction of the jet and does not disperse. The processing area of the fan-shaped nozzle is large, the polishing area is approximately a rectangle, and the removal depth near the nozzle is larger.Hollow conical nozzle processing finished parts, the polishing area formed a hollow circle, the central part of the removal of less, the circumference of the removal of deep;The removal depth of the polishing area decreases gradually from the center to the circumference after the finished piece is processed by the solid conical nozzle. 5, the workpiece surface profile and material removal depth with the selection of polishing slurry composition changes.With the increase of abrasive concentration, the material removal depth increases, which is roughly in a proportional relationship.With the increase of abrasive particle size, the material removal depth also increases. 
How to make better granular activated carbon02021-06-02 19:22:36
Activated carbon, is black powder or block, granular, honeycomb amorphous carbon, but also a regular arrangement of crystalline carbon.In addition to carbon elements, activated carbon also contains two kinds of admixtures: one is the chemical combination of elements, mainly oxygen and hydrogen, these elements are due to incomplete carbonization and residual in the carbon, or in the activation process, foreign non-carbon elements and activated carbon surface chemical combination;Another kind of admixture is ash, which is the inorganic part of activated carbon, and ash in active carbon is easy to cause secondary pollution.Because of its strong adsorption, activated carbon is widely used in production,In the life.Activated carbon material is processed by the amorphous carbon, has a large specific surface area, the gas, solution of inorganic or organic matter and colloidal particles have good adsorption capacity.Activated Carbon materials mainly include Activated Carbon (AC) and Activated Carbon Fibers (ACF), etc.Activated carbon material as a kind of excellent adsorbent, mainly because of its unique adsorption surface structure and surface chemical properties.Activated carbon material has stable chemical properties and high mechanical strength. https://www.activated-carbon-pellets.com/  The selection of treatment technology should be based on the gas volume, purification requirements, the possibility of recovery, the economy of equipment construction and operation and other conditions. Special attention should be paid to the close cooperation with the process in practical work, so as to achieve comprehensive utilization as far as possible.dxd activated carbon  At present, there are three common methods of organic waste gas treatment at home and abroad: liquid absorption method, activated carbon adsorption method and catalytic combustion method. 
How to make better granular activated carbon02021-06-30 19:03:10
(1) coal-based activated carbon, also known as coal-based activated carbon. It is a general term for a large class of activated carbon products made of various raw coal through different processes.Coal-based activated carbon can be divided into molding carbon and raw coal direct crushing carbon according to the different manufacturing process.dxdcarbon.com  The former and can be further subdivided into wet molding charcoal (such as tar, papermaking black liquor, such as starch paste liquid adhesive manufacturing columnar, ball charcoal, honeycomb carbon, etc.) and dry molding charcoal (such as join solid bitumen, starch, such as tree powder as adhesive used for Mao briquette made of molding process, tabletting, pelleting and broken charcoal or rules of pelleting shape activated carbon).activated carbon manufacturers  Generally speaking, forming carbon can be mixed with a variety of raw coal to adjust the pore distribution characteristics of the final product, so as to obtain some special application performance, and more than 80% of the pore distribution characteristics of raw coal directly broken carbon has been determined by the raw material, so the performance and use is simple. (2) wood activated carbon.It is mshell/core activated carbon.Such as coconut shell carbon, apricot kernel carbon, peach kernel carbon, etc.(4) petroleum activated carbon.Using petroleum asphalt, petroleum coke as raw materials, made of activated carbon products.resin activated carbon.Using phenolic resin, waste ion exchange resin as raw materials, through a special process of activity.Carbon products, sometimes fibrous carbon also falls into this category.High - definition watermark of cut document under air(6) other small varieties of activated carbon products. Made of animal blood blood carbon, made of animal bones bone charcoal (there is very little, but bone charcoal carbon main ingredients of hydroxy calcium phosphate), with active carbon molecular sieve made of various materials, made of strong base and carbon materials of high surface area activated carbon, is made of organic polymer solution after mold made of special process method of activated carbon, activated carbon aerogels and so on. 
How to make better granular activated carbon02021-12-10 23:16:05
By use.Generally there are three kinds. (1) gas phase adsorption of activated carbon.activated carbon for gold recovery  Can be used for exhaust treatment, air purification, solvent recovery, gas separation, deodorization, desulfurization and denitration, industry.Raw material gas refining, gas chromatography filler, air sampler, fresh-keeping, ozone removal, cigarette filter nozzle, gas adsorption storage, military and civil gas masks, etc.(2) liquid phase adsorption of activated carbon.Tap water treatment, pure water manufacturing, industrial and domestic sewage advanced treatment, decolorization refining, blood purification, gold recovery, double capacitor electrode, pharmaceutical activated carbon wholesale carbon, etc.(3) catalyst (catalyst) with activated carbon. 
How to make better granular activated carbon02021-06-23 19:02:12
In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties. Chemical method in addition to certain micropores, macropores, there are more mesopores (transition pores), so it is more suitable for the application of liquid phase, adsorption of larger molecules of substances, such as sugar solution has a good decolorization effect;wholesale activated carbon pellets  When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements. https://www.dxdcarbon.com   Particle strength is also a main index of granular activated carbon. In order to improve the particle strength of granular activated carbon, usually take some special processing measures, such as adding some material help plasticizing and proper mechanical treatment 4 or control in the process of kneading kneading temperature and kneading time, can greatly improve the strength of granular activated carbon particles, making the strength of the granular activated carbon has reached the fruit shell carbon intensity index. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions