Activated carbon activated carbon made of MONOsodium glutamate development related questions

Answers
Asked by
Updated
Activated carbon activated carbon made of MONOsodium glutamate development02021-11-30 01:17:34
When the temperature is below 600℃, the specific surface area of carbonized material increases with the increase of temperature.When 600~900℃, the specific surface area reaches a certain value: 250~300 m2/g; when above1000℃, the specific surface area shrinks rapidly.activated carbon from china   When the carbonization temperature is above 800℃, the reaction performance of carbonized compounds and activation gas gradually becomes weaker, so the carbonization temperature is generally below 1000℃. However, if the residual volatile content and thermal effect are taken into account, the most suitable temperature should be 600~700℃39]. gold coconut shell activated carbon  The carbonized substance obtained from the carbonization process is placed in water vapor or a mixture of water vapor and combustion gas and heat treated at 800~1000℃, which is called the activation process. The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method. Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. The main principle of chemical activation method is the raw materials in 0.5~5 times the chemical activator impregnation for a certain time, in the process of heating, because of the dehydration of chemicals, the H and О elements in the raw materials in the form of water vapor released, the results produced a developed porous structure of activated carbon.The method requires the oxygen content in the raw material.25%, hydrogen content ≥5%[4], and most of the materials that can meet the requirements of this index are rice husk, wood and coal 
Dingxinda activated carbon monosodium glutamate and seasoning02022-02-10 00:12:54
) Without adding additives to the sludge, the concentration of sulfuric acid and zinc chloride is 4 mol·L' and the volume ratio is 2:1. The activated carbon prepared has the maximum iodine adsorption value of 549.6 mg·g 'and the yield of 51.3%, which is the better carbon sample prepared by pure sludge and is recorded as SAC.(3) Adding 8% peanut shell, the iodine value of activated carbon of sludge reached 789.6mg · g', which was recorded as PACactivated carbon manufacturers  By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperatureIs the activator concentration Pyrolysis time >Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbon; powdered activated carbon (pac)  The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure. Pacific Northwest National Laboratory and Princeton University are working with a private company to develop a high-capacity, fast-charging battery. The secret is to add graphene to lithium-ion batteries to improve power and cycle stability. Researchers at Stanford University say graphene-based lighting could be cheap and environmentally friendly. Graphene-based LECs could replace metal-based OLEDs(organic light-emitting diodes). They could also replace traditional metal-based graphite electrodes in lamps, making them cheaper and easier to recycle. Researchers in China found that bacterial cells on graphene paper were unable to grow, while human cells were not damaged. Take advantage of this by making bandages, food wrappers and even antibacterial t-shirts. The scientific community is paying close attention to the research progress of graphene, this amazing material once put into practice will bring revolutionary changes to human society. 
What is the majority of carbonization process of activated carbon? How to produce high quality activated carbon in large quantities02021-07-10 01:00:27
Generally speaking, forming carbon can be mixed with a variety of raw coal to adjust the pore distribution characteristics of the final product, so as to obtain some special application performance, and more than 80% of the pore distribution characteristics of raw coal directly broken carbon has been determined by the raw material, so the performance and use is simple.activated carbon manufacturers  (2) wood activated carbon.It is mshell/core activated carbon.Such as coconut shell carbon, apricot kernel carbon, peach kernel carbon, etc.(4) petroleum activated carbon.Using petroleum asphalt, petroleum coke as raw materials, made of activated carbon products.resin activated carbon.Using phenolic resin, waste ion exchange resin as raw materials, through a special process of activity.Carbon products, sometimes fibrous carbon also falls into this category.High - definition watermark of cut document under air(6) other small varieties of activated carbon products. Made of animal blood blood carbon, made of animal bones bone charcoal (there is very little, but bone charcoal carbon main ingredients of hydroxy calcium phosphate), with active carbon molecular sieve made of various materials, made of strong base and carbon materials of high surface area activated carbon, is made of organic polymer solution after mold made of special process method of activated carbon, activated carbon aerogels and so on. coal activated carbon manufacturer  Some of them are very small production and dosage, and some are still in the laboratory research stage, so they are included in the category of small varieties of activated carbon products. ade of all kinds of hard wood, crop wastes, and other industrial and agricultural wastes containing lignocellulose The beansMaterial as raw material, through the chemical method, physical method or physical-chemical combination of activated carbon. 
The use and development of activated carbon02021-12-08 21:40:02
In view of the characteristics of large amount of matter and high content of benzene organic matter in gas, the method of removing these substances is studied and the solution is given. In this study, the concentration of benzene, naphthalene and ash in gas before purifying feed-gas compressor was determined by chromatograph, picric acid titration and weighing method respectively. According to the measured values, the experimental flow was designed, and coke column and activated carbon column were made by themselves.activated carbon for gold recovery  The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples.The adsorption effluent curve of benzene by activated carbon was plotted.activated carbon wholesale  The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied. The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions. At the same time, the filtration and adsorption properties of coke were tested. The experiment shows that the adsorption performance of the test coke on benzene is very weak, can not be used as the nitrogen adsorbent, but the coke filter and adsorption performance of ash and naphthalene is very good, the content of naphthalene and ash after the gas through the coke column completely meet the design requirements. The results show that the combined use of coke and activated carbon in the gas system can completely achieve the purpose of removing benzene, naphthalene and ash. According to the above research results, a coke filter was designed. The application of the equipment solved the problems that the feedstock gas compressor in the urea blackening unit could not run for a long period due to the vibration caused by the scaling of the rotor, the blockage of the flow channel and the problems that the naphthalene formation in the heat exchanger affected the heat transfer effect. 
The development of activated carbon02021-12-24 21:08:35
Activated carbon adsorption, is the use of activated carbon on the solid surface of the water adsorption or a variety of substances, in order to achieve the role of water purification. The adsorption of activated carbon is produced in two aspects.One is that the molecules inside the activated carbon are subjected to equal forces in all directions while the molecules on the surface are subjected to uneven forces.This makes other points adsorbed on its surface, which is physical adsorption;The other is due to the chemical action between activated carbon and adsorbed substances, which is chemical adsorption.The adsorption of activated carbon is the result of the comprehensive action of the above two kinds of adsorption. activated carbon for gold recovery  When the adsorption speed and desorption speed of activated carbon in the solution is equal, that is, the number of activated carbon adsorption is equal to the number of desorption, the concentration of the adsorbed material in the solution and the concentration on the surface of activated carbon are no longer intermingled, that is, to achieve the balance, the dynamic balance at this time is called activated carbon adsorption balance. activated carbon wholesale  
Activated carbon project development02021-11-21 21:49:34
In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.activated carbon pellets wholesale  emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes.china active carbon/  In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc. Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress. 
Activated carbon project development02021-11-26 23:08:46
When the activated carbon adsorbed impurities contained in the water, the dissolved impurities in the water accumulated on the surface of the activated carbon and were adsorbed, but also some of the adsorbed substances left the surface of the activated carbon due to the movement of molecules, and re-entered the water at the same time desorption phenomenon. When adsorption and desorption are in a state of dynamic equilibrium, it is called adsorption equilibrium. At this point, the solute concentration between activated carbon and water (i.e. solid and liquid phase) has a certain distribution ratio. If under certain pressure and temperature conditions, with m grams of activated carbon adsorption solute in the solution, the solute adsorption is X mg, then the number of activated carbon adsorption solute per unit weight q. , that is, the adsorption capacity can be calculated as follows powdered activated carbon producers  Activated carbon treatment process is the use of adsorption method to remove odor, some ions and difficult to biodegrade organic pollutants. The specific surface area of activated carbon plays an important role in the adsorption process. At the same time, the solubility of adsorbed material in the solvent also directly affects the adsorption speed. In addition, pH, temperature and the dispersion degree of adsorbed material also have a certain influence on the adsorption speed.pelletized activated carbon suppliers  The adsorption of impurities in water by activated carbon has both physical adsorption and chemical adsorption. Some of the adsorbed substances first accumulated on the surface of activated carbon, and then into the solid lattice atoms or molecules between the adsorption, and some special substances are combined with activated carbon molecules and are sucked. 
Extended development of activated carbon02021-07-12 23:39:34
Principle of activated carbon adsorption activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detectionIn domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester. cost of powdered activated carbon  The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon. www.activated-carbon-pellets.com  
The development of activated carbon is sustainable02021-10-26 01:21:24
Activated carbon adsorption method is widely used in the purification of organic waste gas. When there are many components in the waste gas, the adsorption situation becomes complicated. In view of the fact that the exhaust gas of printing, tanning and coating industries contains benzene, toluene and ethyl acetate, etc., the kinetics of treating the exhaust gas by activated carbon adsorption method was studied experimentally, and the optimization of operating parameters of the fixed bed adsorber was explored, which could be used for reference in engineering design. The experimental results show that the adsorption equilibrium of pure components is in good agreement with the Langmuir equation. In the case of multi-component adsorption, due to the competition and interference between each component, the component with strong adsorption ability can replace the other component that has been absorbed, so that the penetration curve of each component has obvious changes.coal activated carbon supplier   The penetration point of the components with relatively weak adsorption capacity was significantly advanced, while the penetration time of the components with strong adsorption capacity was delayed. granular activated charcoal 
Sales and development of activated carbon02021-12-01 23:47:03
cIn painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc. emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes.gold coconut shell activated carbon  In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.activated carbon from china  Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress. 
Activated carbon project development02021-12-15 00:01:54
Its adsorption is selective, and non-polar substances are easier to be adsorbed than polar substances.In the same series of substances, the higher the boiling point of the substance, the more tolerantEasy to be adsorbed, the greater the pressure, the lower the temperature, the greater the concentration, the greater the amount of adsorption.On the contrary, decompression and heating are beneficial to gas desorption.It is often used for gas adsorption,Separation and purification, recovery of solvents, decolorizing agents for sugar solution, grease, glycerin, medicine, deodorant for drinking water and refrigerators, filter agent for gas masks,It can also be used as a catalyst or metal salt catalyst carrier.Early production of activated carbon raw materials for wood, hard nut shell or animal bones, later mainly used coal, after dryingDistillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃.activated carbon gold mining  ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and wast e gas, harmful gases, organic pollutants, pigments and so on. activated carbon company 
How about the future development of activated carbon02021-07-09 19:30:28
coal-based activated carbon, also known as coal-based activated carbon. It is a general term for a large class of activated carbon products made of various raw coal through different processes.Coal-based activated carbon can be divided into molding carbon and raw coal direct crushing carbon according to the different manufacturing process. The former and can be further subdivided into wet molding charcoal (such as tar, papermaking black liquor, such as starch paste liquid adhesive manufacturing columnar, ball charcoal, honeycomb carbon, etc.) and dry molding charcoal (such as join solid bitumen, starch, such as tree powder as adhesive used for Mao briquette made of molding process, tabletting, pelleting and broken charcoal or rules of pelleting shape activated carbon).yrd carbon  Generally speaking, forming carbon can be mixed with a variety of raw coal to adjust the pore distribution characteristics of the final product, so as to obtain some special application performance, and more than 80% of the pore distribution characteristics of raw coal directly broken carbon has been determined by the raw material, so the performance and use is simple. coal activated carbon manufacturer  (2) wood activated carbon.It is mshell/core activated carbon.Such as coconut shell carbon, apricot kernel carbon, peach kernel carbon, etc.(4) petroleum activated carbon.Using petroleum asphalt, petroleum coke as raw materials, made of activated carbon products.resin activated carbon.Using phenolic resin, waste ion exchange resin as raw materials, through a special process of activity.Carbon products, sometimes fibrous carbon also falls into this category.High - definition watermark of cut document under air(6) other small varieties of activated carbon products. Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gases; Medical treatment and biological engineering: can be used for the manufacture of artificial kidney, liver adsorbent, used in biological engineering for enzyme fixation; Daily life: can be used in refrigerator deodorization, fruit and vegetable preservation, household water purifier, cigarette filter, deodorization and disease prevention insoles and other daily necessities production;Other aspects: can be used as catalyst carrier, stationary phase of gas chromatography, solar heat collector and precious metal production 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions