Ding Xinda activated carbon carbon adsorption and carbon principle and adsorption price related questions

Asked by
Ding Xinda activated carbon carbon adsorption and carbon principle and adsorption price02021-11-29 22:43:36
Its adsorption is selective, and non-polar substances are easier to be adsorbed than polar substances.In the same series of substances, the higher the boiling point of the substance, the more tolerantEasy to be adsorbed, the greater the pressure,activated carbon from china  the lower the temperature, the greater the concentration, the greater the amount of adsorption.On the contrary, decompression and heating are beneficial to gas desorption.It is often used for gas adsorption,Separation and purification, recovery of solvents, decolorizing agents for sugar solution, grease, glycerin, medicine, deodorant for drinking water and refrigerators, filter agent for gas masks,It can also be used as a catalyst or metal salt catalyst carrier.Early production of activated carbon raw materials for wood, hard nut shell or animal bones, later mainly used coal, after dryingDistillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃. gold coconut shell activated carbon activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detection, 
Ding Xinda activated carbon carbon adsorption and carbon principle and adsorption02021-11-29 22:42:41
With the rapid development of pharmaceutical preparation industry and primary molecular material industry, the microencapsulated activated carbon products coated with polymer materials have been successfully trial-produced in foreign countries, and applied in clinical practice, the medical care and treatment effect is very good, many of them have been put into the market, and have achieved good economic and social benefits. gold recovery activated carbon  It is worth noting that there is a shortage of activated carbon in China. For a long time, the production of drugs using activated carbon as raw materials has been kept in the laboratory, and no products have been marketed or used in clinical trials.coconut activated carbon factory  Experts said that with the continuous improvement of people's life quality and health care consciousness enhancement, as well as the rapid development of all kinds of industrial, environmental pollution has been increasingly serious, people an opportunity to contact with a variety of harmful material, activated carbon and activated carbon as the leading raw material to produce medicines and health products, medical market will become a major conventional leading consumer products, Market demand will be on the rise year by year, is a new economic growth point in the pharmaceutical and chemical market, its economic and social benefits will increase year by year. 
Ding Xinda activated carbon carbon adsorption and carbon principle02021-11-29 22:41:57
② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. gold coconut shell activated carbon  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
Ding Xinda activated carbon adsorption capacity and price02022-02-10 18:53:14
1. Combined with Zeta potential, sedimentation experiment, viscosity measurement and other methods, the influence of various dispersants on CEO and slurry suspension effect was studied. The results showed that the formula with good stability was the appropriate concentration of mixed dispersant (NAP +SBN) or (NAP +PAM+SBN).gold recovery from activated carbon  2. The removal rate of CEOZ slurry prepared with mixed dispersant (NAP +PAM+SBN) in the processing of K9 glass by MASJP was higher than that of other mixed dispersants.activated carbon china manufacturers  By comparing the processing effect of MASJP with and without mixed additives, it is found that the processing effect of MASJP with mixed additives (NAP +PAM+SBN) has higher surface quality, which can significantly reduce the interface area between the polished area and the unpolished surface and increase the smooth surface as much as possible.3. Combining online observation and single factor method, the formation process of the surface features of the polished area was studied. The experimental results showed that the surface morphology of the polished area showed a W-shaped bowl structure in the vertical jet machining, and an eccentric bowl structure in the crescent shape in the oblique jet machining.Compared with the abrasive water jet machining effect, it is found that the W shape and crescent shape characteristics of the polishing region of MASJP are relatively flat, the smooth surface is larger and the surface quality is higher. 4. When applying nozzle with different outlet shapes in MASJP, it is found that the fluid ejected from the cylindrical nozzle flows out along the direction of the jet and does not disperse. The processing area of the fan-shaped nozzle is large, the polishing area is approximately a rectangle, and the removal depth near the nozzle is larger.Hollow conical nozzle processing finished parts, the polishing area formed a hollow circle, the central part of the removal of less, the circumference of the removal of deep;The removal depth of the polishing area decreases gradually from the center to the circumference after the finished piece is processed by the solid conical nozzle. 5, the workpiece surface profile and material removal depth with the selection of polishing slurry composition changes.With the increase of abrasive concentration, the material removal depth increases, which is roughly in a proportional relationship.With the increase of abrasive particle size, the material removal depth also increases. 
Ding Xinda activated carbon carbon adsorption02021-11-29 22:39:53
Because activated carbon has numerous small pores, large surface area, strong adsorption capacity, can adsorb a variety of organic compounds, widely used in pharmaceutical industry and chemical industry.coconut activated carbon factory   Especially in the field of medicine, activated carbon, as a highly effective gastrointestinal cleaning agent, can effectively adsorb pesticide residues, fungicides, heavy metals, dioxins, various pathogenic bacteria and toxins in the digestive tract and human body that damage human health or cause disease wastes, harmless to human body.gold recovery activated carbon  With the rapid development of pharmaceutical preparation industry and primary molecular material industry, the microencapsulated activated carbon products coated with polymer materials have been successfully trial-produced in foreign countries, and applied in clinical practice, the medical care and treatment effect is very good, many of them have been put into the market, and have achieved good economic and social benefits. 
Ding Xinda activated carbon adsorption capacity02022-02-10 18:52:23
Adding appropriate chemical reagents will play the role of catalytic oxidation [73], and these chemical reagents will also increase the active point of activation reaction, which is conducive to the development of activated carbon pores. activated charcoal suppliers & manufacturers  Now at home and abroad the main research work is mainly the following aspects: a, additive in the functional mechanism of manufacturing activated carbon energy gao jun of China university of mining mechanism of additives in the manufacturing activated carbon made detail [4, pointed out that: the catalyst in the carbonization stage prompted carbon the destruction of the molecular structure of aromatic raw materials, to "structure" of disordering, provides a good initial activation reaction conditions, is an important factor to improve the activation of activated carbon pore. In the process of activation, potassium to strengthen the directionality of the pore, thereby reducing the unnecessary on ignition, and accelerated the process of pore forming, And pore distribution is given priority to with microporous activated carbon; refractory in the catalyst to ash content of SiO2 and Al, 03, etc, into acid soluble potassium nepheline chemical compounds such as magnesium and calcium silicon stone is the key to improve pickling deliming rate factor b and additives on the activated carbon adsorption properties, pore structure and pore size distribution - adding different additives. The influence of the activated carbon: c, chemicals for coking products. www.wyactivatedcarbon.com 
Ding Xinda activated carbon decomposition adsorption02021-12-27 22:37:41
Due to the high requirement of activated carbon for water pretreatment, and the high price of activated carbon, so in wastewater treatment, activated carbon is mainly used to remove trace pollutants in wastewater, in order to achieve the purpose of deep purification.www.powdered-activated-carbon.com  1. Activated carbon treatment of wastewater containing chromium. Chromium is a kind of metal raw material used in electroplating. The hexavalent chromium in wastewater exists in different forms with different pH values. Activated carbon has a very developed microporous structure and high specific surface area, has a strong physical adsorption capacity, can effectively adsorb Cr (V) in wastewater. There are a large number of oxygen-containing groups on the surface of activated carbon, such as hydroxyl (-OH), carboxyl (-COOH), etc., which all have the function of electrostatic adsorption and produce chemical adsorption on Cr (VI). It can be completely used to treat Cr (VI) in electroplating wastewater, and the adsorbed wastewater can meet the national discharge standard. The results showed that when the mass concentration of Cr (VI) in the solution was 50mg/L, pH=3 and adsorption time was 1.5h, the adsorption performance and Cr (VI) removal rate of activated carbon reached the best effect. Therefore, the process of treating wastewater containing chromium by activated carbon is the result of the comprehensive action of physical adsorption, chemical adsorption and chemical reduction of Cr (VI) in solution by activated carbon. Activated carbon treatment of wastewater containing chromium has stable adsorption performance, high treatment efficiency, low operating cost, and certain social and economic benefits.activated carbon pellets wholesale  2. Treatment of cyanide-containing wastewater with sexual carbon. In industrial production, cyanide or by-product cyanide is used in the wet extraction of gold and silver, the production of chemical fiber, coking, synthesis of ammonia, electroplating, gas I production and other industries, so a certain amount of cyanide-containing wastewater must be discharged in the production process. Activated carbon has been used to purify wastewater for a long time and there are more and more reports on its application in the treatment of cyanide-containing wastewater. However, due to the small adsorption capacity of CN_ and HCN on activated carbon, which is generally 3mgCN/ GAC --8mgCN/ GAC depending on the variety, it is not cost-effective in the treatment cost. 3. Activated carbon treatment of wastewater containing mercury. Activated carbon has the ability to adsorb mercury and mercury-containing compounds, but its adsorption capacity is limited, and it is only suitable for treating wastewater with low mercury content. If the concentration of mercury is high, it can be treated by chemical precipitation method first. After treatment, the mercury content is about 1mg/L, and it can reach 2-3mg /L when high, and then further treatment with activated carbon. 
Ding Xinda activated carbon non-polar adsorption capacity02021-11-30 22:38:15
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.gold coconut shell activated carbon  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. activated carbon from china  
Ding Xinda activated carbon molecular weight and adsorption capacity02021-10-09 02:19:35
It solves the problem that graphene material is expensive and cannot enter the industrial application field without large-scale production.powdered activated carbon supplier  It provides a foundation for the large-scale application of graphene. Using the super conductivity and large specific surface area of graphene, the problem that the traditional activated carbon material used in the electrode can no longer improve the electric storage performance was solved. The complete set of equipment not only solves the industrial method of composite graphene liquid phase method to the activated carbon material used for supercapacitor, but also can activate the activated carbon material twice at room temperature. The complete set of equipment meets the requirements of cleaner production. Chapter 2: The quality of graphene prepared by this project is guaranteed. The complete set of equipment not only solves the industrial method of composite graphene liquid phase method to the activated carbon material used for supercapacitor, but also can activate the activated carbon material twice at room temperature.activated carbon pellets wholesale  The complete set of equipment meets the requirements of cleaner production. Chapter 2: The quality of graphene prepared by this project is guaranteed. Self-made graphene has a high single-layer rate (up to 99%), fewer defects, and can be dried for a long time. Can be prepared into a variety of solutions to facilitate the composite with other materials. Raw material is a wide range of natural graphite meters, is prepared by industrial methods can be put into production. 
Ding Xinda activated carbon purification and decomposition of specific surface area adsorption capacity0CLMnb2021-12-06 22:49:48
The preparation methods of activated carbon include physical method, chemical method, microwave radiation method, etc.(1) Physical method.activated carbon from china   Physical method is to use carbon dioxide, water vapor or the mixture of both as activator, the carbonized carbon material and gas in the activation furnace at 500~1200℃ for carbon activation reaction, so that the pore size of the carbonized material to expand, the formation of activated carbon with porous microcrystalline structure.Gas activation method mainly includes carbonization and activation engineering.The so-called carbonization, refers to the low temperature (about 500℃) is small, the volatile coal tar molecules in the material and the thermal decomposition and curing process of asphalt, that is, to remove the volatile in advance, made suitable for the next step of activation with carbonization.gold coconut shell activated carbon  When the temperature is below 600℃, the specific surface area of carbonized material increases with the increase of temperature.When 600~900℃, the specific surface area reaches a certain value: 250~300 m2/g; when above1000℃, the specific surface area shrinks rapidly. When the carbonization temperature is above 800℃, the reaction performance of carbonized compounds and activation gas gradually becomes weaker, so the carbonization temperature is generally below 1000℃. However, if the residual volatile content and thermal effect are taken into account, the most suitable temperature should be 600~700℃39]. The carbonized substance obtained from the carbonization process is placed in water vapor or a mixture of water vapor and combustion gas and heat treated at 800~1000℃, which is called the activation process. The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method. Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. 
Activated carbon filtration adsorption principle02021-08-30 23:27:02
Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gasescoal based granular activated carbon   Medical treatment and biological engineering: can be used for the manufacture of artificial kidney, liver adsorbent, used in biological engineering for enzyme fixation;https://www.granular-activated-carbon.com  Daily life: can be used in refrigerator deodorization, fruit and vegetable preservation, household water purifier, cigarette filter, deodorization and disease prevention insoles and other daily necessities production;Other aspects: can be used as catalyst carrier, stationary phase of gas chromatography, solar heat collector and precious metal production 
Chemical adsorption principle of activated carbon 02021-06-08 18:48:52
The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon.  Air velocity of empty tower :U= 1.0m /s.OriginalIts adsorption performance mainly depends on several main material parameters and process parameters on it [8. Material parameters including carbon adsorption porosity, thickness of honeycomb structure and the content of carbon; process parameters including fluid flow rate and concentration of the adsorption properties of adsorption, can adsorption depends on the carbon structure and adsorption properties of features such as molecular weight). The curve is one of the main performance characterization of adsorption, adsorption is the adsorbate concentration ratio before and after the change over time of a function [9 '. This ratio is 0.95, the amount of adsorption properties of adsorption is called penetration capacity. Penetration capacity depending on the fluid flow rate, the concentration of the adsorbate and honeycomb carbon component content the nature of the adsorbent Depends on its bath solubility, surface white energy, polarity, adsorbate molecule size and unsaturation, the concentration of adsorbate, etc ③ Wastewater pH value Activated carbon generally has a higher adsorption rate in acidic solution than in alkaline solution. The pH value will affect the state and bath solubility of the adsorbent in the water towel, thus affecting the adsorption effect. ④ Coexisting substances When a variety of adsorbates coexist, the adsorption capacity of activated carbon to a certain adsorbate is worse than that containing only the adsorbate (5) temperature The effect of temperature on the adsorption of activated carbon is small 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions