Ding Xinda activated carbon non-material transmission related questions

Answers
Asked by
Updated
Ding Xinda activated carbon non-material transmission02021-11-26 19:35:41
By use.Generally there are three kinds. (1) gas phase adsorption of activated carbon.gold coconut shell activated carbon  Can be used for exhaust treatment, air purification, solvent recovery, gas separation, deodorization, desulfurization and denitration, industry.Raw material gas refining, gas chromatography filler, air sampler, fresh-keeping, ozone removal, cigarette filter nozzle, gas adsorption storage, military and civil gas masks, etc.(2) liquid phase adsorption of activated carbon.Tap water treatment, pure water manufacturing, industrial and domestic sewage advanced treatment, decolorization refining, blood purification, gold recovery, double capacitor electrode, pharmaceutical carbon, etc.(3) catalyst (catalyst) with activated carbon.activated carbon from china  Both can be directly used as a catalyst for this industrial process (such as phosgene synthesis, synthesis of vinyl acetate, etc.), more time activated carbon is used as a catalyst carrier (such as carrying precious metal pins, men, palladium, nails, gold made of pin carbon, palladium carbon catalyst, etc.).(1) solvent recovery.Such as recycling printing industry with xylene, toluene, benzene and other solvents;Recycling organic solvents such as ethanol, acetone, ester and ether from plastics and artificial leather industry;Recycling of hexanone in tape factory;Recycling of dichloromethane from resin processing plants, etc.(2) air purification.Such as electronic, pharmaceutical industry aseptic workshop air purification;Removal of ozone in the air of the copy room and computer room;The removal of foreign odor in the air of confined space;Odor removal from refrigerators, etc.(3) Nuclear and biochemical protection.Nuclear radiation, biological warfare agents, chemical warfare agents are weapons of mass destruction, activated carbon is loaded with a variety of chemical agents can effectively protect it Activated carbon or chemical-loaded activated carbon is often used as a key component of personal protective equipment in the presence of toxic gases in the civilian industry. During the SARS crisis in late 2002 and early 2003, special protective masks with activated carbon loaded with silver played a role in protecting health care workers. (4) deep purification treatment of tap water.Practice has proved that activated carbon is still has the best effect of the depth of water purification products, its dosage in recent | years show how multiple growth. There is evidence that the next five years will be a rapid growth period for white water purification in China, and the demand for carbon for water purification will be a blowout development.(5). Deep purification treatment of industrial wastewater. For example, the three-level decolorization of printing and dyeing wastewater, the removal of heavy metal ions from electroplating wastewater, the purification of papermaking wastewater and the removal of COD from petrochemical industrial wastewater to meet the discharge standards, activated carbon has been proved to be one of the most effective deep purification materials. 
Ding Xinda activated carbon raw material use02022-01-13 23:16:06
The maintenance sewage contains a large number of complex biodegradable substances, biodegradability is poor, for many years mainly rely on fresh water dilution treatment and combustion furnace treatment, but these two methods are low efficiency and high cost, so it is necessary to develop new wastewater treatment methods.www.chinactivecarbon.com   Although we have studied the upflow anaerobic sludge bed reactor (UASB) for the treatment of high concentration sewage of the natural gas purification plant, the start-up test results of 133 days show that the effluent COD removal rate is only about 40% when the influent COD is 6000mg/L, and the treatment effect is not good. Therefore, it is of practical significance to explore and seek an effective pretreatment method.gold adsorption on activated carbon  In this paper, Fenton oxidation and activated carbon adsorption were combined to pretreat the wastewater from natural gas purification maintenance, in order to improve the subsequent operation efficiency of UASB. This experiment by orthogonal test to determine the Fenton reagent oxidation first preliminary operating conditions, on this basis, carries on the single factor analysis method, the main factors influencing the Fenton reagent treatment effect for each study, investigation of its influence on wastewater COD removal rate, the results show that Fenton oxidation method the optimum operating conditions for natural gas purification overhaul wastewater treatment: HO2 dosing quantity 0.3 mol/L, n (HO)/n (Fe) = systematically, initial pH = 3, reaction temperature 70 ℃, reaction time, 40 min. Under these conditions, the COD removal rate reached 78.6%, the BOD /COD value increased from 0.168 to 0.353-0.403, and the biodegradability was greatly improved. If Ho is added in three times and the interval time is 10min, the COD removal rate will increase from 78.6% to 80.3%. Therefore, it can be seen that H0: batch addition will further improve the reaction effect. After Fenton oxidation treatment, wastewater and activated carbon adsorption, this topic activated carbon adsorption experiments using single factor method, examines different PH, activated carbon adsorption dosing quantity and the influence of adsorption time of wastewater COD removal rate, the results show that after Fenton oxidation treatment without having to adjust PH value, according to the 20 g/L after adding the activated carbon reaction 3 h at room temperature, COD removal rate was 47.3%,, BOD/COD value of 0.438 to 0.625. The research in this paper has laid a theoretical foundation and provided an experimental basis for the practical application of Fenton oxidation and activated carbon adsorption in the pretreatment of natural gas purification maintenance wastewater in UASB reactor. 
Ding Xinda activated carbon decomposition material02021-12-14 23:35:07
With the rapid development of pharmaceutical preparation industry and primary molecular material industry, the microencapsulated activated carbon products coated with polymer materials have been successfully trial-produced in foreign countries, and applied in clinical practice, the medical care and treatment effect is very good, many of them have been put into the market, and have achieved good economic and social benefits.activated carbon gold mining  It is worth noting that there is a shortage of activated carbon in China. For a long time, the production of drugs using activated carbon as raw materials has been kept in the laboratory, and no products have been marketed or used in clinical trials.activated carbon company  Experts said that with the continuous improvement of people's life quality and health care consciousness enhancement, as well as the rapid development of all kinds of industrial, environmental pollution has been increasingly serious, people an opportunity to contact with a variety of harmful material, activated carbon and activated carbon as the leading raw material to produce medicines and health products, medical market will become a major conventional leading consumer products, 
Ding Xinda activated carbon carbon adsorption and carbon principle02021-11-29 22:41:57
② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. gold coconut shell activated carbon  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
Ding Xinda activated carbon use02021-12-13 00:44:20
2.1.3 Determination of ash content. Put 150mL porcelain cyanosis pot in muffle furnace, burn it at (65020) "℃ to constant weight, put the cyanosis pot in dryer, cool and weigh; Weigh 5 grams of the crushed sample (approximately 0.1mg) and place it in 150mL porcelain coating that has been burned to constant weight; Put Zengtan into a muffle furnace whose temperature does not exceed 300℃, open the cyanosis cap, and gradually increase the temperature to a constant weight at 650 ℃ 20℃. It takes about three hours. Calculate ash value and get ash content.activated carbon for gold recovery  2.1.4 Determination of methylene blue adsorption value. The crushed sample was weighed with 1.0 grams (approximately to 1mg) and placed in a 100mL grinding stopper conical flask. An appropriate amount of methylene blue test solution was added with an eyedrot. The filtrate was placed in a colorimetric dish with a light diameter of LCM, and the absorbance was measured with a spectrophotometer at a wavelength of 665nm. The absorbance was compared with the absorbance of the standard cupric sulfate filter. The number of ml of methylene blue test solution consumed was the methylene blue adsorption value of the sample. activated carbon wholesale  
Ding Xinda activated carbon use02021-12-22 00:10:48
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.activated carbon for gold recovery  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption apparatus.activated carbon wholesale  For the gas phase adsorption, the size of the gas molecules is usually less than 1. ONM, the use of microporous activated carbon; For liquid-phase decolorization refining, due to the large size of the liquid molecules, it is necessary to use activated carbon with developed mesopore. Activated carbon has a large specific surface area and a particularly developed micro-pore structure, which is the main reason for its strong adsorption capacity and large adsorption capacity. 
Ding Xinda activated carbon value02021-12-29 21:32:21
At present, the organic pollution of drinking water source is relatively serious. The organic pollutants themselves are not only highly toxic, but also may generate halogenated disinfection by-products (DBPs) after chlorination disinfection. Meanwhile, the existence of organic compounds will reduce the biological stability of drinking water and lead to the secondary reproduction of microorganisms in the pipe network. Therefore, it is important to reduce the content of organic pollutants in drinking water. Conventional water treatment process has low removal efficiency for organic pollutants, so it is imperative to seek economic and efficient treatment technology. On the basis of giving full play to the advantages of ozone oxidation to remove organic matter, ozone catalytic oxidation technology can induce the formation of highly oxidizing hydroxyl radical (-Oh), which can effectively remove trace organic pollutants that are difficult to degrade in water and reduce the content of ozone oxidation by-products. It is a kind of water treatment method with great prospect.activated carbon for gold recovery  Laboratory studies have shown that ceramic honeycomb activated carbon catalytic ozone oxidation technology and removal of trace organic matter in water has more obvious advantages, but the catalytic oxidation and active carbon process characteristics to be in-depth study, therefore the pilot was investigated through honeycomb ceramic catalytic ozonation and activated carbon catalytic ozonation and activated carbon filter combination process operation characteristics. activated carbon wholesale 
Ding Xinda activated carbon block02021-12-22 23:40:43
Activated carbon (AC) is a kind of porous carbon material with developed pore structure and large specific surface area, which is prepared by using biological organic matter (such as wood, coke, petroleum coke, coal and various nut shells, etc.). It is a kind of high quality adsorbent.activated carbon pellets wholesale   With the development of industry, its application is more and more extensive.www.powdered-activated-carbon.com  At present, it has been widely used in the field of environmental protection, food industry and medicine. The granular activated carbon with high strength was prepared by heating wood phosphate mixture at low temperature and using tar generated during its pyrolysis as binder. In this paper, the process conditions and plasticizing mechanism of granular activated carbon prepared by phosphoric acid were studied, which provided scientific data and theoretical basis for the preparation of high strength granular activated carbon. Fir chip as the raw materials, H - POs as activator, using single factor analysis and orthogonal experimental design method, this paper discusses the influence granular activated carbon pore structure and the iodine adsorption value, methylene blue and strength of various preparation factors, determine the optimum process conditions of preparation of granular activated carbon phosphoric acid, phosphoric acid concentration is 70%, dipping 180%, kneading temperature is 170 ℃, for 60 min kneading time, activation temperature is 350 ℃, the activation time of 210 min. The iodine adsorption value, methylene blue adsorption value, strength and BET specific surface area of GAC were 1020.04mGG, 225mg/g, 88.73% and 1486.48m2/g respectively. The experimental results show that the impregnation ratio and carbon activation temperature have great effects on the adsorption performance of GAC, while the kneading temperature and impregnation ratio have great effects on the strength of GAC. Because the strength of GAC decreases with the increase of impregnation ratio, and the decrease range is large, so the preparation of GAC with compound activator is proposed. The results show that the composite activator can reduce the impregnation ratio of phosphoric acid to wood chips and improve the strength of granular activated carbon. At the same time, the composite activator can improve the adsorption performance of GAC. Therefore, granular activated carbon with good adsorption performance and high strength can be prepared by this method. 
Ding Xinda activated carbon deodorization0CLMnb2021-12-06 22:29:24
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester. powdered activated carbon producers  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is pelletized activated carbon suppliers by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. 
Ding Xinda activated carbon price02021-12-28 21:37:37
(1) According to the relevant national standards, the sludge of Liede Sewage Treatment Plant is mainly composed of volatile organic compounds, with a volatile content of 64.86%, which can be used as the main raw material for the preparation of activated carbon.(2) Without adding additives to the sludge, the concentration of sulfuric acid and zinc chloride is 4 mol·L' and the volume ratio is 2:1. The activated carbon prepared has the maximum iodine adsorption value of 549.6 mg·g 'and the yield of 51.3%, which is the better carbon sample prepared by pure sludge and is recorded as SAC.which was recorded as PAC;By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperature >Is the activator concentration >Pyrolysis time >activated carbon for gold recovery  Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbon;The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure.activated carbon wholesale  SEM analysis showed that the surface pores of commercial activated carbon were microporous and relatively uniform, while the surface of SAC and PAC presented irregular porous structure. XRD analysis showed that the commercial activated carbon was amorphous carbon, SAC and PAC were microcrystalline carbon with hexagonal shape structure 
Triangulation of ding Xinda activated carbon02021-12-22 00:07:44
The polishing slurry and processing technology of micro-abrasive slurry jet were studied. activated carbon gold mining  Through the analysis of the physical and chemical properties of additives and their state changes under the jet, the comprehensive effects of the types and proportions of different additives, as well as the types, proportions and particle sizes of abrasive on the formation of uniform slurry, the promotion of good abrasive dispersion and the jet polishing effect were explored.activated carbon company  The effects of different types of nozzles, polishing slurry, jet distance, jet time, different initial RA, jet pressure and jet Angle on the surface profile, material removal depth and surface quality of the workpiece were studied through polishing experiments. The local Ra of the optical glass surface is in the range of 20nm~50nm by MASJP, and the lowest Ra is 10.24nm. 1. Combined with Zeta potential, sedimentation experiment, viscosity measurement and other methods, the influence of various dispersants on CEO and slurry suspension effect was studied. The results showed that the formula with good stability was the appropriate concentration of mixed dispersant (NAP +SBN) or (NAP +PAM+SBN). 2. The removal rate of CEOZ slurry prepared with mixed dispersant (NAP +PAM+SBN) in the processing of K9 glass by MASJP was higher than that of other mixed dispersants. By comparing the processing effect of MASJP with and without mixed additives, it is found that the processing effect of MASJP with mixed additives (NAP +PAM+SBN) has higher surface quality, which can significantly reduce the interface area between the polished area and the unpolished surface and increase the smooth surface as much as possible.3. Combining online observation and single factor method, the formation process of the surface features of the polished area was studied. The experimental results showed that the surface morphology of the polished area showed a W-shaped bowl structure in the vertical jet machining, and an eccentric bowl structure in the crescent shape in the oblique jet machining.Compared with the abrasive water jet machining effect, it is found that the W shape and crescent shape characteristics of the polishing region of MASJP are relatively flat, the smooth surface is larger and the surface quality is higher. 4. When applying nozzle with different outlet shapes in MASJP, it is found that the fluid ejected from the cylindrical nozzle flows out along the direction of the jet and does not disperse. The processing area of the fan-shaped nozzle is large, the polishing area is approximately a rectangle, and the removal depth near the nozzle is larger.Hollow conical nozzle processing finished parts, the polishing area formed a hollow circle, the central part of the removal of less, the circumference of the removal of deep;The removal depth of the polishing area decreases gradually from the center to the circumference after the finished piece is processed by the solid conical nozzle. 
Ding Xinda activated carbon understanding02021-12-08 22:40:24
By use.Generally there are three kinds. (1) gas phase adsorption of activated carbon. Can be used for exhaust treatment, air purification, solvent recovery, gas separation, deodorization, desulfurization and denitration, industry.Raw material gas refining, gas chromatography filler, air sampler, fresh-keeping, ozone removal, cigarette filter nozzle, gas adsorption storage, military and civil gas masks, etc.(2) liquid phase adsorption of activated carbon.Tap water treatment, pure water manufacturing, industrial and domestic sewage advanced treatment, decolorization refining, blood purification, gold recovery, double capacitor electrode, pharmaceutical carbon, etc.(3) catalyst (catalyst) with activated carbon. activated carbon for gold recovery  Both can be directly used as a catalyst for this industrial process (such as phosgene synthesis, synthesis of vinyl acetate, etc.), more time activated carbon is used as a catalyst carrier (such as carrying precious metal pins, men, palladium, nails, gold made of pin carbon, palladium carbon catalyst, etc.).(1) solvent recovery.Such as recycling printing industry with xylene, toluene, benzene and other solvents;Recycling organic solvents such as ethanol, acetone, ester and ether from plastics and artificial leather industry;Recycling of hexanone in tape factory;Recycling of dichloromethane from resin processing plants, etc.(2) air purification.Such as electronic, pharmaceutical industry aseptic workshop air purification;Removal of ozone in the air of the copy room and computer room;The removal of foreign odor in the air of confined space;Odor removal from refrigerators, etc.(3) Nuclear and biochemical protection.Nuclear radiation, biological warfare agents, chemical warfare agents are weapons of mass destruction, activated carbon is loaded with a variety of chemical agents can effectively protect it Activated carbon or chemical-loaded activated carbon is often used as a key component of personal protective equipment in the presence of toxic gases in the civilian industry. During the SARS crisis in late 2002 and early 2003, special protective masks with activated carbon loaded with silver played a role in protecting health care workers.  activated carbon for gold recovery 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions