How to make better granular activated carbon related questions

Answers
Asked by
Updated
How to make better granular activated carbon02021-04-27 00:12:37
By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperatureIs the activator concentration Pyrolysis time >Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbonactivated carbon company  The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure. Distillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃. ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on.www.coconutactivatedcarbon.com  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
How to make better granular activated carbon02021-12-13 00:04:48
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.www.powdered-activated-carbon.com  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. activated carbon pellets wholesale 
How to make better granular activated carbon02021-12-16 22:02:44
emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes.activated carbon for gold recovery  In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.activated carbon wholesale   Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress. 
How to make better granular activated carbon02021-06-02 19:22:36
Activated carbon, is black powder or block, granular, honeycomb amorphous carbon, but also a regular arrangement of crystalline carbon.In addition to carbon elements, activated carbon also contains two kinds of admixtures: one is the chemical combination of elements, mainly oxygen and hydrogen, these elements are due to incomplete carbonization and residual in the carbon, or in the activation process, foreign non-carbon elements and activated carbon surface chemical combination;Another kind of admixture is ash, which is the inorganic part of activated carbon, and ash in active carbon is easy to cause secondary pollution.Because of its strong adsorption, activated carbon is widely used in production,In the life.Activated carbon material is processed by the amorphous carbon, has a large specific surface area, the gas, solution of inorganic or organic matter and colloidal particles have good adsorption capacity.Activated Carbon materials mainly include Activated Carbon (AC) and Activated Carbon Fibers (ACF), etc.Activated carbon material as a kind of excellent adsorbent, mainly because of its unique adsorption surface structure and surface chemical properties.Activated carbon material has stable chemical properties and high mechanical strength. https://www.activated-carbon-pellets.com/  The selection of treatment technology should be based on the gas volume, purification requirements, the possibility of recovery, the economy of equipment construction and operation and other conditions. Special attention should be paid to the close cooperation with the process in practical work, so as to achieve comprehensive utilization as far as possible.dxd activated carbon  At present, there are three common methods of organic waste gas treatment at home and abroad: liquid absorption method, activated carbon adsorption method and catalytic combustion method. 
How to make better granular activated carbon02021-09-04 00:40:04
Adding appropriate chemical reagents will play the role of catalytic oxidation [73], and these chemical reagents will also increase the active point of activation reaction, which is conducive to the development of activated carbon pores. Now at home and abroad the main research work is mainly the following aspects: a, additive in the functional mechanism of manufacturing activated carbon energy gao jun of China university of mining mechanism of additives in the manufacturing activated carbon made detail [4, pointed out that: the catalyst in the carbonization stage prompted carbon the destruction of the molecular structure of aromatic raw materials, to "structure" of disordering, provides a good initial activation reaction conditions, is an important factor to improve the activation of activated carbon pore. In the process of activation, potassium to strengthen the directionality of the pore, thereby reducing the unnecessary on ignition, and accelerated the process of pore forming,https://www.granular-activated-carbon.com  And pore distribution is given priority to with microporous activated carbon; refractory in the catalyst to ash content of SiO2 and Al, 03, etc, into acid soluble potassium nepheline chemical compounds such as magnesium and calcium silicon stone is the key to improve pickling deliming rate factor b and additives on the activated carbon adsorption properties, pore structure and pore size distribution - adding different additives. The influence of the activated carbon: c, chemicals for coking products.  www.powdered-activated-carbon.com 
How to make better granular activated carbon02021-12-12 23:05:19
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.activated carbon gold mining  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results. activated carbon company  
How to make better granular activated carbon02021-12-16 22:03:49
cBecause activated carbon has numerous small pores, large surface area, strong adsorption capacity, can adsorb a variety of organic compounds, widely used in pharmaceutical industry and chemical industry. activated carbon for gold recovery  Especially in the field of medicine, activated carbon, as a highly effective gastrointestinal cleaning agent, can effectively adsorb pesticide residues, fungicides, heavy metals, dioxins, various pathogenic bacteria and toxins in the digestive tract and human body that damage human health or cause disease wastes, harmless to human body.activated carbon wholesale  With the rapid development of pharmaceutical preparation industry and primary molecular material industry, the microencapsulated activated carbon products coated with polymer materials have been successfully trial-produced in foreign countries, and applied in clinical practice, the medical care and treatment effect is very good, many of them have been put into the market, and have achieved good economic and social benefits. It is worth noting that there is a shortage of activated carbon in China. For a long time, the production of drugs using activated carbon as raw materials has been kept in the laboratory, and no products have been marketed or used in clinical trials. 
How to make better granular activated carbon02021-06-23 19:02:12
In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties. Chemical method in addition to certain micropores, macropores, there are more mesopores (transition pores), so it is more suitable for the application of liquid phase, adsorption of larger molecules of substances, such as sugar solution has a good decolorization effect;wholesale activated carbon pellets  When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements. https://www.dxdcarbon.com   Particle strength is also a main index of granular activated carbon. In order to improve the particle strength of granular activated carbon, usually take some special processing measures, such as adding some material help plasticizing and proper mechanical treatment 4 or control in the process of kneading kneading temperature and kneading time, can greatly improve the strength of granular activated carbon particles, making the strength of the granular activated carbon has reached the fruit shell carbon intensity index. 
How to make better granular activated carbon02021-06-02 19:09:43
Adsorption capacity refers to the amount of adsorbents adsorbed on the adsorbent per unit mass under certain conditions. It is usually expressed in terms of K adsorbents /kg of adsorbent or mass percentage, which is a sign of the adsorption capacity of the adsorbent. In industry, the amount of adsorption is called the activity of the adsorbent. The activity of the adsorbent can be expressed in two ways :(1) the static activity of the adsorbentUnder certain conditions, the equilibrium adsorption capacity of the adsorbent is its static activity.For a certain adsorption system, the static activity depends only on the adsorption temperature and the concentration or partial pressure of the adsorbed substance. Dynamic activity of adsorbents wholesale activated carbon pellets  Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent.manufacturers of coconut shell activated carbon in china  The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. Activated carbon is porous carbon material, has a strong adsorption capacity,Widely used in air purification, wastewater treatment and other fields.The reactive nitric acid is placed in an environment to absorb radon gas, and then Y measurement is carried out, which can be pushed Calculate the radon concentration in the environment.Activated carbon Y energy spectrum is one of the main methods for measuring radon.In 1957, Mirandajr "used activated carbon as an adsorber to measure radon concentrations in the atmosphere;Since then, many scholars have carried out a series of theoretical and experimental studies on the method of measuring radon on activated carbon, and it has been widely used in the study of radon release rate 23. In 1986, Lin Lianqing et al. carried out radon measurement by activated carbon. In 1993, China promulgated the national standard 5 for the method of measuring radon by activated carbon V energy spectrum. Since then, this method has been popularized and applied in China, and has achieved satisfactory results in the determination of radon release rate and radon concentration in air L6-8.The radon measurement by activated carbon mainly measures the energy spectrum peak of 2Pb or 21Bi, and the radon concentration value is calculated from the net peak area. This method can distinguish 2Rn daughters, which is convenient for attenuation correction, and has a strong anti-interference ability for other Y radiators (such as 2Rn and its daughters, etc.).However, it requires high energy resolution and low counting rate. The theoretical basis, attenuation correction and standing time of this radon measurement method are discussed. 
How to make better granular activated carbon02022-01-17 23:07:03
Acid-base modification is to use acid, alkali and other substances to treat activated carbon, according to the actual need to adjust the surface functional groups of activated carbon, make it change, improve its ability of adsorption of metal ions, so as to achieve the desired adsorption effect.Acid-base modification of activated carbon is usually carried out to improve the adsorption effect of activated carbon on metal ions represented by copper ions. The commonly used modifiers include HC1, NaOH and citrate 3.It was found that by acid-base modification of common coal activated carbon, the ash content of the activated carbon could be greatly reduced and the specific surface area of the activated carbon could be increasedgold adsorption onto activated carbon  Electrochemical modification is to change the electrical and chemical properties of activated carbon surface by using micro electric field, so as to improve the adsorption selectivity and performance.It does not need to add chemical agents, does not need to heat, does not cause pollution to the environment, low energy consumption, only a few hundred millivolts, easy to operate.The results show that the adsorption equilibrium of activated carbon is dependent on the electric potential: the adsorption amount of activated carbon increases with the increase of the potential, and the adsorption speed is accelerated;Arpolarity polarization is beneficial to the adsorption of chloroform by activated carbon, while cathodic polarization inhibits the adsorption of chloroform by activated carbon 3-341]. activated carbon manufacturers uae  Activated carbon heteroatom carrier and compound modificationActivated carbon has very high stability and good activity, these two basic properties become the activated carbon as a catalyst or catalyst carrier conditions.By introducing certain heteroatoms and compounds on the surface of activated carbon by liquid phase deposition, the adsorption performance of activated carbon can be increased by using the binding effect between these substances and adsorbents.compounds, which has the advantages of increasing the reaction rate and increasing the adsorption capacity.Yang Quanhong et al. 'Using FESO;Activated carbon material was modified. 
How to make better granular activated carbon02021-12-17 00:14:05
Its adsorption is selective, and non-polar substances are easier to be adsorbed than polar substances.In the same series of substances, the higher the boiling point of the substance, the more tolerantEasy to be adsorbed, the greater the pressure, the lower the temperature, the greater the concentration, the greater the amount of adsorption.On the contrary, decompression and heating are beneficial to gas desorption.It is often used for gas adsorption,Separation and purification, recovery of solvents, decolorizing agents for sugar solution, grease, glycerin, medicine, deodorant for drinking water and refrigerators, filter agent for gas masks,It can also be used as a catalyst or metal salt catalyst carrier.Early production of activated carbon raw materials for wood, hard nut shell or animal bones, later mainly used coal, after dryingDistillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃.activated carbon for gold recovery  ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. activated carbon wholesale  
How to make better granular activated carbon02021-12-13 00:06:08
2.1.2 activated carbon wholesale  Determination of iron content 1.0g (approximately 10mg) of dried crushed sample was taken and placed in a 100mL conical flask. 25mL of dilute hydrochloric acid was added and boiled gently for 5min. Then, the sample was slightly cooled and filtered into a 100mL volumetric flask. 10mL of filtrate was put into a 50mL volumetric flask, and 5mL of acetic acid-sodium acetate buffer solution, 2.5ml hydroxylamine hydrochloride solution, and 1mL of 1, 10-phenoline solution were added, diluted to the line, shaken for 10min to show color reaction, and spectrophotometer was used to measure the absorbance with a 1cm colorimeter at the wavelength of 510nm. activated carbon for gold recovery 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions