The use of activated carbon and water refining related questions

Answers
Asked by
Updated
The use of activated carbon and water refining02021-08-27 23:20:25
Adding appropriate chemical reagents will play the role of catalytic oxidation [73], and these chemical reagents will also increase the active point of activation reaction, which is conducive to the development of activated carbon pores.https://www.granular-activated-carbon.com  Now at home and abroad the main research work is mainly the following aspects: a, additive in the functional mechanism of manufacturing activated carbon energy gao jun of China university of mining mechanism of additives in the manufacturing activated carbon made detail [4, pointed out that: the catalyst in the carbonization stage prompted carbon the destruction of the molecular structure of aromatic raw materials, to "structure" of disordering, provides a good initial activation reaction conditions, is an important factor to improve the activation of activated carbon pore. In the process of activation, potassium to strengthen the directionality of the pore, thereby reducing the unnecessary on ignition, and accelerated the process of pore forming, And pore distribution is given priority to with microporous activated carbon; refractory in the catalyst to ash content of SiO2 and Al, 03, etc, into acid soluble potassium nepheline chemical compounds such as magnesium and calcium silicon stone is the key to improve pickling deliming rate factor b and additives on the activated carbon adsorption properties, pore structure and pore size distribution - adding different additives. The influence of the activated carbon: c, chemicals for coking products. coal based granular activated carbon  
The use of activated carbon and refining water reasonable degree02021-08-27 23:28:04
At this time, the concentration of the adsorbed substance in the solution is called equilibrium concentration.In aerobic part, a self-made internal circulating biological fluidized bed reactor was used to treat organic pesticide wastewaterThe effects of internal circulating biological fluidized bed on the removal of organic matter and the deamination of organic pesticide wastewater, the change of wastewater biodegradability and acute biological toxicity were investigated.The results show that the internal circulation biological fluidized bed with granular activated carbon as the carrier has a fast speed of membrane and can be cultured in about days by the rapid sludge drainage methodOut of activated sludge.The internal circulating biological fluidized bed with granular activated carbon as the carrier is not sensitive to temperature change at 1 ℃, and has a certain impact resistance ability.Aeration amount has effect on the treatmentToo large or too small aeration will reduce the reactor treatment efficiency.The optimal hydraulic retention time of the internal circulating biological fluidized bed using granular activated carbon as carrier is, and the treatment effect will be affected if the hydraulic retention time is too long or too short. www.powdered-activated-carbon.com  At the aeration rate of /,During hydraulic retention, the total helium removal rate is.%,.%, water effluent/up tothe biodegradability of wastewater was significantly improved, and the acute biological toxicity was reduced by %.When the efficiency of internal circulating activated carbon biological fluidized bed treatment is.%, the reaction is obtained Using small activated carbon fixed bed adsorption gas phase dioxin test bench, a typical activated carbon adsorption dioxin factors affecting the experimental study, discusses the types of dioxin adsorption activated carbon and activated carbon fixed bed adsorption gas phase characteristics of dioxins, and discusses the adsorption temperature and adsorption time of activated carbon adsorption of dioxins.The results showed that the specific surface area and micropore volume of activated carbon had weak correlation with the adsorption efficiency of dioxins.pelletized activated carbon  The mesopore volume of activated carbon is an important factor to determine the adsorption capacity of dioxins. The surface area of the pore size between 2 nm and 20nm plays a key role in the adsorption of dioxins.The higher the adsorption temperature, the lower the adsorption efficiency of activated carbon.The longer the adsorption time, the lower the adsorption efficiency of activated carbon.There is no selective adsorption of gaseous dioxins in activated carbon fixed bed. 
Refining of activated carbon02021-06-09 18:23:00
Air velocity of empty tower :U= 1.0m /s.OriginalIts adsorption performance mainly depends on several main material parameters and process parameters on it [8. Material parameters including carbon adsorption porosity, thickness of honeycomb structure and the content of carbon; process parameters including fluid flow rate and concentration of the adsorption properties of adsorption, can adsorption depends on the carbon structure and adsorption properties of features such as molecular weight). The curve is one of the main performance characterization of adsorption, adsorption is the adsorbate concentration ratio before and after the change over time of a function [9 '. This ratio is 0.95, the amount of adsorption properties of adsorption is called penetration capacity. Penetration capacity depending on the fluid flow rate, the concentration of the adsorbate and honeycomb carbon component content  activated carbon suppliers canada  Using small activated carbon fixed bed adsorption gas phase dioxin test bench, a typical activated carbon adsorption dioxin factors affecting the experimental study, discusses the types of dioxin adsorption activated carbon and activated carbon fixed bed adsorption gas phase characteristics of dioxins, and discusses the adsorption temperature and adsorption time of activated carbon adsorption of dioxins.The results showed that the specific surface area and micropore volume of activated carbon had weak correlation with the adsorption efficiency of dioxins. The mesopore volume of activated carbon is an important factor to determine the adsorption capacity of dioxins. The surface area of the pore size between 2 nm and 20nm plays a key role in the adsorption of dioxins.The higher the adsorption temperature, the lower the adsorption efficiency of activated carbon.The longer the adsorption time, the lower the adsorption efficiency of activated carbon.There is no selective adsorption of gaseous dioxins in activated carbon fixed bed. dxd carbon  
Activated carbon refining02021-10-22 01:21:32
In the case of multi-component adsorption, due to the competition and interference between each component, the component with strong adsorption ability can replace the other component that has been absorbed, so that the penetration curve of each component has obvious changes.activated charcoal powder  The penetration point of the components with relatively weak adsorption capacity was significantly advanced, while the penetration time of the components with strong adsorption capacity was delayed. In this paper, E-L equation and IAST theory are used for theoretical prediction and analysis of multi-component adsorption equilibrium, and compared with experimental results.www.activated-carbon-pellets.com   The results show that although the prediction of total adsorption amount by E-L equation is in good agreement with the experimental results, the prediction of each component adsorption amount by E-L equation often produces positive and negative deviation, and the average error is usually more than 20%. However, IAST can eliminate the positive and negative deviation well, and the average error is less than 10%, which is more consistent with the experimental results. The operating parameters showed that the adsorption capacity of activated carbon would decrease with the increase of temperature, gas velocity or humidity. The appropriate operating range is: temperature within 40℃, gas speed between 0.1~0.5 m/s, humidity is best not more than 40%. In this range, the relationship between pressure drop and gas velocity basically conforms to Ergun equation. 
Hue refining capacity of activated carbon02022-02-15 22:06:18
Fir chip as the raw materials, H - POs as activator, using single factor analysis and orthogonal experimental design method, this paper discusses the influence granular activated carbon pore structure and the iodine adsorption value, methylene blue and strength of various preparation factors, determine the optimum process conditions of preparation of granular activated carbon phosphoric acid, phosphoric acid concentration is 70%, dipping 180%, kneading temperature is 170 ℃, for 60 min kneading time, activation temperature is 350 ℃, the activation time of 210 min.gold recovery from activated carbon  The iodine adsorption value, methylene blue adsorption value, strength and BET specific surface area of GAC were 1020.04mGG, 225mg/g, 88.73% and 1486.48m2/g respectively.activated carbon china manufacturers  The experimental results show that the impregnation ratio and carbon activation temperature have great effects on the adsorption performance of GAC, while the kneading temperature and impregnation ratio have great effects on the strength of GAC. Because the strength of GAC decreases with the increase of impregnation ratio, and the decrease range is large, so the preparation of GAC with compound activator is proposed. The results show that the composite activator can reduce the impregnation ratio of phosphoric acid to wood chips and improve the strength of granular activated carbon. At the same time, the composite activator can improve the adsorption performance of GAC. Therefore, granular activated carbon with good adsorption performance and high strength can be prepared by this method. 
Activated carbon wine refining02021-11-01 02:08:33
Laboratory studies have shown that ceramic honeycomb activated carbon catalytic ozone oxidation technology and removal of trace organic matter in water has more obvious advantages, but the catalytic oxidation and active carbon process characteristics to be in-depth study, therefore the pilot was investigated through honeycomb ceramic catalytic ozonation and activated carbon catalytic ozonation and activated carbon filter combination process operation characteristics.activated charcoal powder  Test of honeycomb ceramic catalytic reactor under the condition of gas-liquid mass transfer ability, lower ozone reactor but when gas water ratio greater than 0.15 oil-gas fluid mass transfer capacity will exceed ozone reactor. The gas holdup (EG) of the ozone reactor and the honeycomb ceramic catalytic oxidation reactor is 0.19% and 0.15% when the gas volume is 0.1 m'/h, respectively, indicating that the size of bubbles in the catalytic oxidation reactor is large, which is not conducive to gas-liquid mass transfer. The Pe parameters of ozone reactor and honeycomb ceramic catalytic reactor were 3.14 and 5.25, respectively, indicating that the liquid phase pushing component in catalytic oxidation reactor was higher, which was beneficial to gas-liquid mass transfer. The gas-liquid mass transfer efficiency of catalytic oxidation reactor is more affected by increasing gas-water ratio. www.activated-carbon-pellets.com  
Activated carbon refining processing02021-11-11 18:15:55
Several strategic and tactical negotiation levers are explained in the report to help buyers achieve the best prices for the Activated Carbon market yrdcarbon. The report also aids buyers with relevant Activated Carbon pricing levels, pros, and cons of prevalent pricing models such as volume-based pricing, spot pricing, and cost-plus pricing and category management strategies and best practices to fulfill their category objectives.activated charcoal powder  The pressure from substitutes and a moderate level of threat from new entrants has resulted in the low bargaining power of suppliers.Price forecasts are beneficial in purchase planning activated charcoal powder wholesale, especially when supplemented by the constant monitoring of price influencing factors. During the forecast period, the market expects a change of 5.00%-8.00%.Identify favorable opportunities in Activated Carbon TCO (total cost of ownership).www.activated-carbon-pellets.com   Expected changes in price forecast and factors driving the current and future price changes. Identify pricing models that offer the most rewarding opportunities. Information on how to identify strategic and tactical negotiation levels that will help achieve the best prices.Gain information on relevant pricing levels, detailed explanation on pros and cons of prevalent pricing models. Methods to help engage with the right suppliers and discover KPI's to evaluate incumbent suppliers. 
Activated carbon refining manufacturing02022-02-15 21:49:48
The polishing slurry and processing technology of micro-abrasive slurry jet were studied. Through the analysis of the physical and chemical properties of additives and their state changes under the jet, the comprehensive effects of the types and proportions of different additives, as well as the types, proportions and particle sizes of abrasive on the formation of uniform slurry, the promotion of good abrasive dispersion and the jet polishing effect were explored.www.wyactivatedcarbon.com   The effects of different types of nozzles, polishing slurry, jet distance, jet time, different initial RA, jet pressure and jet Angle on the surface profile, material removal depth and surface quality of the workpiece were studied through polishing experiments. The local Ra of the optical glass surface is in the range of 20nm~50nm by MASJP, and the lowest Ra is 10.24nm. activated charcoal suppliers & manufacturers  1. Combined with Zeta potential, sedimentation experiment, viscosity measurement and other methods, the influence of various dispersants on CEO and slurry suspension effect was studied. The results showed that the formula with good stability was the appropriate concentration of mixed dispersant (NAP +SBN) or (NAP +PAM+SBN). 
Activated carbon refining and iron content02021-10-22 01:24:42
These 18 kinds of organic matter account for 74.2% of toxic gas emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes. In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc. 
Activated carbon refining gold methods have what02021-06-28 00:52:12
The maintenance sewage contains a large number of complex biodegradable substances, biodegradability is poor, for many years mainly rely on fresh water dilution treatment and combustion furnace treatment, but these two methods are low efficiency and high cost, so it is necessary to develop new wastewater treatment methods. Although we have studied the upflow anaerobic sludge bed reactor (UASB) for the treatment of high concentration sewage of the natural gas purification plant, the start-up test results of 133 days show that the effluent COD removal rate is only about 40% when the influent COD is 6000mg/L, and the treatment effect is not good. Therefore, it is of practical significance to explore and seek an effective pretreatment method. In this paper, Fenton oxidation and activated carbon adsorption were combined to pretreat the wastewater from natural gas purification maintenance, in order to improve the subsequent operation efficiency of UASB. This experiment by orthogonal test to determine the Fenton reagent oxidation first preliminary operating conditions, on this basis, carries on the single factor analysis method, the main factors influencing the Fenton reagent treatment effect for each study, investigation of its influence on wastewater COD removal rate, the results show that Fenton oxidation method the optimum operating conditions for natural gas purification overhaul wastewater treatment: HO2 dosing quantity 0.3 mol/L, n (HO)/n (Fe) = systematically, initial pH = 3, reaction temperature 70 ℃, reaction time, 40 min. Under these conditions, the COD removal rate reached 78.6%, the BOD /COD value increased from 0.168 to 0.353-0.403, and the biodegradability was greatly improved. If Ho is added in three times and the interval time is 10min, the COD removal rate will increase from 78.6% to 80.3%. Therefore, it can be seen that H0: batch addition will further improve the reaction effect. 
Ding Xinda activated carbon refining processing02021-11-11 18:43:21
In general, all compounds with conjugate double bond structure, activated carbon is easy to adsorption, the more often double bond, activated carbon on its adsorption capacity is greater. This is mainly because activated carbon has a hexagonal structure formed by the combination of covalent bonds (with large bond structure properties of aromatic ring), which is easy to be mutual www.chinactivecarbon.com/   Some pigments, most of which have a strategic structure, are easy to be adsorbed on the carbon. In the process of recrystallization, activated carbon decolorization is added to remove impurities. This is the reason. For the same skeleton compounds or the same type of compounds, the introduction of amine, hydroxyl, carboxyl and other polar groups will often increase the adsorption of activated carbon to it. The adsorption power of activated carbon on the material is related to the structure of the adsorbed material and the solvent used.wholesale activated carbon pellet  The adsorption capacity is usually strongest in water, followed by ethanol and acetone, and weaker in other solvents. Therefore, the decolorization with activated carbon is the best in aqueous solution, followed by ethanol and acetone, and almost no decolorization ability in other organic solvents. The size of the adsorption force of activated carbon on the solute in the solution, in addition to the size of the activated carbon and the structure of the adsorbed matter, must also consider the interaction between solute and solvent, that is, must also consider the size of the solute solubility of the solvent. Activated carbon chromatography is often carried out in an aqueous solution, the solubility of the adsorbate in water when there is a key role in the adsorption capacity or adsorption stability. For example, the adsorption of activated carbon on iodine, flash iodine in the water towel solubility is minimum, so the adsorption of activated carbon in water is the largest. Another example of activated carbon on the adsorption of trans butadienoic acid is greater than cis butadienoic acid, the reason is that the solubility of trans butadienoic acid in water than cis butadienoic acid. 
Dingxinda activated carbon hue refining and pure adsorption02021-10-18 01:45:50
Activated carbon adsorption method is widely used in the purification of organic waste gas. When there are many components in the waste gas, the adsorption situation becomes complicated. In view of the fact that the exhaust gas of printing, tanning and coating industries contains benzene, toluene and ethyl acetate, etc., the kinetics of treating the exhaust gas by activated carbon adsorption method was studied experimentally, and the optimization of operating parameters of the fixed bed adsorber was explored, which could be used for reference in engineering design.www.chinactivecarbon.com/   The experimental results show that the adsorption equilibrium of pure components is in good agreement with the Langmuir equation. In the case of multi-component adsorption, due to the competition and interference between each component, the component with strong adsorption ability can replace the other component that has been absorbed, so that the penetration curve of each component has obvious changes.wholesale activated carbon pellet  The penetration point of the components with relatively weak adsorption capacity was significantly advanced, while the penetration time of the components with strong adsorption capacity was delayed. In this paper, E-L equation and IAST theory are used for theoretical prediction and analysis of multi-component adsorption equilibrium, and compared with experimental results. The results show that although the prediction of total adsorption amount by E-L equation is in good agreement with the experimental results, the prediction of each component adsorption amount by E-L equation often produces positive and negative deviation, and the average error is usually more than 20%. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions