Iodine adsorption value and adsorption capacity of activated carbon related questions

Answers
Asked by
Updated
Iodine adsorption value and adsorption capacity of activated carbon0CLMnb2021-08-26 02:59:39
Microwave heating can produce good effects in the preparation and modification of activated carbon (S2. Microwave modification, many backwater hole is opened, the distributed capacitance change obviously, promoting the improvement of the adsorption. The microwave power and irradiation time are key determinants of modified activated carbon adsorption performance. On the mechanism of microwave carbonization and activation, it is generally believed thathttps://www.granular-activated-carbon.com  Plant waste is mostly made of plant fiber raw materials, in the plant body under the action of capillary, modified solution absorbed by material whole fully, between fiber is filled with the subtle space, make the dry material volume expansion after soaking wet, and reaction. Because of the water in the raw material, modified solution constitute a polar molecule, with a strong absorption of microwave dielectric properties,Therefore, polar molecules collide and rub violently with microwave frequency, generating a large amount of heat, which makes water and modified solution volatilize rapidly, and generate steam pressure, which explodes out from the inside of the raw material to the outside. This sharp action makes the fiber space of the raw material expand and produce sharp drying.In this way, the raw material has a more obvious pore structure and a larger internal specific surface area than before microwave irradiation. Compared with the traditional heating method, the mechanism of microwave in the preparation process of activated carbon is completely different.It shows its unique advantages: high efficiency, energy saving, uniformity, selectivity, low pollution, high thermal efficiency, low energy consumption, simple process and equipment and small footprint, conducive to automation, low carbon loss, and recovery of useful substances.coal based granular activated carbon  Many theoretical problems in this new field, especially the microwave heating mechanism, need to be further studied, and the mathematical model of the heating process needs to be established 
Iodine adsorption value of activated carbon02021-09-02 23:29:46
Principle of activated carbon adsorption activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detectionIn domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester. https://www.granular-activated-carbon.com  Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gases coal based granular activated carbon  
Iodine adsorption value of granular activated carbon02021-07-15 19:18:08
Under these conditions, the COD removal rate reached 78.6%, the BOD /COD value increased from 0.168 to 0.353-0.403, and the biodegradability was greatly improved.www.coalactivatedcarbon.com  If Ho is added in three times and the interval time is 10min, the COD removal rate will increase from 78.6% to 80.3%. Therefore, it can be seen that H0: batch addition will further improve the reaction effect. granular activated charcoal buy  After Fenton oxidation treatment, wastewater and activated carbon adsorption, this topic activated carbon adsorption experiments using single factor method, examines different PH, activated carbon adsorption dosing quantity and the influence of adsorption time of wastewater COD removal rate, the results show that after Fenton oxidation treatment without having to adjust PH value, according to the 20 g/L after adding the activated carbon reaction 3 h at room temperature, COD removal rate was 47.3%,, BOD/COD value of 0.438 to 0.625. The research in this paper has laid a theoretical foundation and provided an experimental basis for the practical application of Fenton oxidation and activated carbon adsorption in the pretreatment of natural gas purification maintenance wastewater in UASB reactor. 
Activated carbon strong adsorption capacity and cleaning capacity02021-08-31 20:11:21
Adding appropriate chemical reagents will play the role of catalytic oxidation [73], and these chemical reagents will also increase the active point of activation reaction, which is conducive to the development of activated carbon pores.https://www.granular-activated-carbon.com  Now at home and abroad the main research work is mainly the following aspects: a, additive in the functional mechanism of manufacturing activated carbon energy gao jun of China university of mining mechanism of additives in the manufacturing activated carbon made detail [4, pointed out that: the catalyst in the carbonization stage prompted carbon the destruction of the molecular structure of aromatic raw materials, to "structure" of disordering, provides a good initial activation reaction conditions, is an important factor to improve the activation of activated carbon pore. In the process of activation, potassium to strengthen the directionality of the pore, thereby reducing the unnecessary on ignition, and accelerated the process of pore forming,coal based granular activated carbon  And pore distribution is given priority to with microporous activated carbon; refractory in the catalyst to ash content of SiO2 and Al, 03, etc, into acid soluble potassium nepheline chemical compounds such as magnesium and calcium silicon stone is the key to improve pickling deliming rate factor b and additives on the activated carbon adsorption properties, pore structure and pore size distribution - adding different additives. The influence of the activated carbon: c, chemicals for coking products. 
Iodine adsorption value and utilization rate of activated carbon02021-09-02 23:34:08
The background of the project and the necessity of investment construction In recent years, with the continuous decrease of wood resources and the deterioration of ecological environment worldwide, environmental protection, the realization of sustainable development and comprehensive utilization of resources have become a common concern ofpeople and a problem that the international community is committed to solving.To further improve the level of comprehensive utilization of wood resources and the added value of products has become the main goal of the world wood processing industry.www.powdered-activated-carbon.com  China has a large population and is short of forest resources. The per capita forest stock volume is 0.12m3, lower than the world average level of 0.65 m3.China's wood comprehensive utilization level is also low, only 40%, and advanced countries can reach 80%, and in the level of technology, product grade, production efficiency, market competitiveness and other aspects compared with the developed countries also have a big gap. pelletized activated carbon 
Iodine adsorption value of granular activated carbon and methylene blue value02021-07-15 19:19:02
1. Activated carbon treatment of wastewater containing chromium. Chromium is a kind of metal raw material used in electroplating. The hexavalent chromium in wastewater exists in different forms with different pH values. Activated carbon has a very developed microporous structure and high specific surface area, has a strong physical adsorption capacity, can effectively adsorb Cr (V) in wastewater. There are a large number of oxygen-containing groups on the surface of activated carbon, such as hydroxyl (-OH), carboxyl (-COOH), etc., which all have the function of electrostatic adsorption and produce chemical adsorption on Cr (VI). It can be completely used to treat Cr (VI) in electroplating wastewater, and the adsorbed wastewater can meet the national discharge standard. The results showed that when the mass concentration of Cr (VI) in the solution was 50mg/L, pH=3 and adsorption time was 1.5h, the adsorption performance and Cr (VI) removal rate of activated carbon reached the best effect. Therefore, the process of treating wastewater containing chromium by activated carbon is the result of the comprehensive action of physical adsorption, chemical adsorption and chemical reduction of Cr (VI) in solution by activated carbon. Activated carbon treatment of wastewater containing chromium has stable adsorption performance, high treatment efficiency, low operating cost, and certain social and economic benefits.carbon pellets  2. Treatment of cyanide-containing wastewater with sexual carbon. In industrial production, cyanide or by-product cyanide is used in the wet extraction of gold and silver, the production of chemical fiber, coking, synthesis of ammonia, electroplating, gas I production and other industries, so a certain amount of cyanide-containing wastewater must be discharged in the production process. Activated carbon has been used to purify wastewater for a long time and there are more and more reports on its application in the treatment of cyanide-containing wastewater. However, due to the small adsorption capacity of CN_ and HCN on activated carbon, which is generally 3mgCN/ GAC --8mgCN/ GAC depending on the variety, it is not cost-effective in the treatment cost.https://www.chinactivecarbon.com  3. Activated carbon treatment of wastewater containing mercury. Activated carbon has the ability to adsorb mercury and mercury-containing compounds, but its adsorption capacity is limited, and it is only suitable for treating wastewater with low mercury content. If the concentration of mercury is high, it can be treated by chemical precipitation method first. After treatment, the mercury content is about 1mg/L, and it can reach 2-3mg /L when high, and then further treatment with activated carbon. 4. Activated carbon treatment of phenol-containing wastewater. Phenol-containing wastewater is widely sourced from petrochemical plants, resin plants, coking plants and oil refining and chemical plants. The experimental results show that the activated carbon has a good adsorption performance for phenol, but the increase of temperature is not conducive to adsorption, so that the adsorption capacity is reduced. But the time to reach adsorption equilibrium is shortened by increasing the temperature. The optimum values of the amount of activated carbon and the adsorption time were found, and the removal rate changed little under acidic and neutral conditions. Under the condition of strong alkalinity, the removal rate of phenol decreased sharply, the stronger the alkalinity, the worse the adsorption effect. 
The adsorption capacity of activated carbon is different02021-12-04 00:56:46
1. Combined with Zeta potential, sedimentation experiment, viscosity measurement and other methods, the influence of various dispersants on CEO and slurry suspension effect was studied. The results showed that the formula with good stability was the appropriate concentration of mixed dispersant (NAP +SBN) or (NAP +PAM+SBN).gold coconut shell activated carbon  2. The removal rate of CEOZ slurry prepared with mixed dispersant (NAP +PAM+SBN) in the processing of K9 glass by MASJP was higher than that of other mixed dispersants. By comparing the processing effect of MASJP with and without mixed additives, it is found that the processing effect of MASJP with mixed additives (NAP +PAM+SBN) has higher surface quality, which can significantly reduce the interface area between the polished area and the unpolished surface and increase the smooth surface as much as possible.3. Combining online observation and single factor method, the formation process of the surface features of the polished area was studied. The experimental results showed that the surface morphology of the polished area showed a W-shaped bowl structure in the vertical jet machining, and an eccentric bowl structure in the crescent shape in the oblique jet machining.Compared with the abrasive water jet machining effect, it is found that the W shape and crescent shape characteristics of the polishing region of MASJP are relatively flat, the smooth surface is larger and the surface quality is higher.activated carbon from china  4. When applying nozzle with different outlet shapes in MASJP, it is found that the fluid ejected from the cylindrical nozzle flows out along the direction of the jet and does not disperse. The processing area of the fan-shaped nozzle is large, the polishing area is approximately a rectangle, and the removal depth near the nozzle is larger.Hollow conical nozzle processing finished parts, the polishing area formed a hollow circle, the central part of the removal of less, the circumference of the removal of deep;The removal depth of the polishing area decreases gradually from the center to the circumference after the finished piece is processed by the solid conical nozzle. 5, the workpiece surface profile and material removal depth with the selection of polishing slurry composition changes.With the increase of abrasive concentration, the material removal depth increases, which is roughly in a proportional relationship.With the increase of abrasive particle size, the material removal depth also increases. 
The adsorption capacity of activated carbon is excellent02021-10-22 01:32:07
In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.www.chinactivecarbon.com/  emissions.It is estimated that more than 30 million tons of organic matter are released into the atmosphere worldwide every year, posing a serious threat to human health and plant and animal growth.Organic pollutants are mostly produced in industrial processes.wholesale activated carbon pellet  In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc. Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress. 
Activated carbon adsorption capacity is excellent02021-10-28 01:18:46
(1) External diffusion, the adsorbate from the main air flow through the air film around the particles to the outer surface of the adsorbent; (2) Internal diffusion, the adsorbate from the outer surface through micropores to the surface of the adsorbent micropores (3) adsorption, the adsorbent reached the microporous surface of the adsorbent is adsorbed granular activated charcoal  (4) The desorbed adsorbate diffuses to the main body of the gas phase through internal and external diffusionPhysical adsorption process is generally controlled by internal and external diffusion, chemical adsorption is controlled by both surface dynamics and internal and external diffusion.Because of the complexity of the adsorption process and many influencing factors, it is difficult to derive the rate theoretically, so it is generally determined by experience or model experiment. coal activated carbon supplier 
Shell adsorption capacity of activated carbon0CLMnb2021-08-26 20:46:44
Increase the number of activated carbon mesh and millimeter corresponding table content and related websites. It's not advertising. It's a lot of help to consumers. Now activated carbon is in accordance with the eye, but we do not know that the eye can be changed into millimeters. activated charcoal pellets  Activated carbon is widely used in all aspects of industrial and agricultural production, such as the petrochemical industry without alkali deodorization (refined demercaptan), ethylene desalting water (refined filler), catalyst carrier (palladium, sales, men, etc.), water purification and sewage treatment; Water quality treatment and protection of power plants in the power industry; Chemical industry of chemical catalyst and carrier, gas purification, solvent recovery and oil and other decolorization, refining; Food industry beverage, wine, MSG mother liquor and food refining, decolorization; Gold extraction and tailings recovery in the gold industry; Environmental protection industry sewage treatment, waste gas and harmful gas treatment, gas purification; As well as related industries of cigarette filter, wood floor moistureproof, taste absorption, automobile gasoline evaporation pollution control, the preparation of various impregnation liquid, etc. Activated carbon in the future will have excellent development prospects and broad sales market. www.chinactivecarbon.com  
The adsorption capacity of activated carbon is large02022-02-10 18:46:13
1. Combined with Zeta potential, sedimentation experiment, viscosity measurement and other methods, the influence of various dispersants on CEO and slurry suspension effect was studied. The results showed that the formula with good stability was the appropriate concentration of mixed dispersant (NAP +SBN) or (NAP +PAM+SBN).gold recovery from activated carbon  2. The removal rate of CEOZ slurry prepared with mixed dispersant (NAP +PAM+SBN) in the processing of K9 glass by MASJP was higher than that of other mixed dispersants.activated carbon china manufacturers   By comparing the processing effect of MASJP with and without mixed additives, it is found that the processing effect of MASJP with mixed additives (NAP +PAM+SBN) has higher surface quality, which can significantly reduce the interface area between the polished area and the unpolished surface and increase the smooth surface as much as possible.3. Combining online observation and single factor method, the formation process of the surface features of the polished area was studied. The experimental results showed that the surface morphology of the polished area showed a W-shaped bowl structure in the vertical jet machining, and an eccentric bowl structure in the crescent shape in the oblique jet machining.Compared with the abrasive water jet machining effect, it is found that the W shape and crescent shape characteristics of the polishing region of MASJP are relatively flat, the smooth surface is larger and the surface quality is higher. 4. When applying nozzle with different outlet shapes in MASJP, it is found that the fluid ejected from the cylindrical nozzle flows out along the direction of the jet and does not disperse. The processing area of the fan-shaped nozzle is large, the polishing area is approximately a rectangle, and the removal depth near the nozzle is larger.Hollow conical nozzle processing finished parts, the polishing area formed a hollow circle, the central part of the removal of less, the circumference of the removal of deep;The removal depth of the polishing area decreases gradually from the center to the circumference after the finished piece is processed by the solid conical nozzle. 5, the workpiece surface profile and material removal depth with the selection of polishing slurry composition changes.With the increase of abrasive concentration, the material removal depth increases, which is roughly in a proportional relationship.With the increase of abrasive particle size, the material removal depth also increases. 
Activated carbon technical index and adsorption capacity02021-04-16 01:08:04
Daily life: can be used in refrigerator deodorization, fruit and vegetable preservation, household water purifier, cigarette filter, deodorization and disease prevention insoles and other daily necessities production;Other aspects: can be used as catalyst carrier, stationary phase of gas chromatography, solar heat collector and the production of precious metals (Ag andMarket demand forecastActivated carbon has a wide range of applications: air purification, the production of air filters, can absorb and filter the air in 03 S02 NO2 and odor, gas, smoke and other harmful gas rest, can be used for room, kitchen utensils and other polluted indoor air purification;activated carbon factory  Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gases; coconut activated carbon factory 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions