Why activated carbon granular shell activated carbon has such a good effect related questions

Answers
Asked by
Updated
Why activated carbon granular shell activated carbon has such a good effect02021-06-28 18:55:05
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.dxdcarbon carbon  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties. activated carbon suppliers in uae  Chemical method in addition to certain micropores, macropores, there are more mesopores (transition pores), so it is more suitable for the application of liquid phase, adsorption of larger molecules of substances, such as sugar solution has a good decolorization effect; When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements. The kinetic activity value of adsorbent is the main basis for the design of adsorption system. The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps (1) External diffusion, the adsorbate from the main air flow through the air film around the particles to the outer surface of the adsorbent; (2) Internal diffusion, the adsorbate from the outer surface through micropores to the surface of the adsorbent micropores (3) adsorption, the adsorbent reached the microporous surface of the adsorbent is adsorbed (4) The desorbed adsorbate diffuses to the main body of the gas phase through internal and external diffusionPhysical adsorption process is generally controlled by internal and external diffusion, chemical adsorption is controlled by both surface dynamics and internal and external diffusion.Because of the complexity of the adsorption process and many influencing factors, it is difficult to derive the rate theoretically, so it is generally determined by experience or model experiment. 
Why the effect of the shell activated carbon is so large02021-06-29 02:52:54
High-quality granular activated carbon must have good adsorption performance and strength. Like powdery activated carbon, the adsorption performance of granular activated carbon depends largely on the characteristics of pore structure. The adsorption performance index can be analyzed and characterized by different methods, such as the decolorization performance of activated carbon expressed by methylene blue. Other performance indexes include iodine adsorption value, caramel decolorization rate, etc.wan yang carbon  The pore structure characteristics and specific surface area of activated carbon are usually obtained by measuring nitrogen adsorption isotherm at low temperature with adsorption In addition, the adsorption capacity of activated carbon also has a great relationship with its internal pore structure, pore size distribution and surface chemical properties.https://www.activated-carbon-pellets.com/  Chemical method in addition to certain micropores, macropores, there are more mesopores (transition pores), so it is more suitable for the application of liquid phase, adsorption of larger molecules of substances, such as sugar solution has a good decolorization effect; When purifying water quality, it can also remove the colored material well and achieve the specified chroma requirements. 
Why the nut shell activated carbon adsorption effect is so large02021-06-29 02:54:35
Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gases Water purification, can remove the organic matter and heavy metal ions and mildewy odor, bacteria and used in water decolorization, used in drinking water industry, beverage, beer, medicine, sugar and other industries water purification, decolorization process and pure water, direct drinking water production equipment;Sewage treatment: can be used to treat the chemical industry, electroplating, metallurgy, printing and dyeing, leather, medicine and other sources of sewage, the removal of organic materials, bacteria and organic dyes in the water.Especially the treatment of toxic and harmful wastewater containing high metal ions;Organic solvent recovery: to benzene, ketone, fat, alcohol and other types of organic solvents can be adsorbed recovery;It can be used in solvent recovery devices such as glue spray paint and film, in benzene purification and recovery devices and in environmental protection projects of waste gas and sewage treatment.Health and anti-expansion: made of gas masks, gas and dust masks, gas jackets can have good adsorption and shielding effect on toxic gases;wan yang carbon   Medical treatment and biological engineering: can be used for the manufacture of artificial kidney, liver adsorbent, used in biological engineering for enzyme fixation;https://www.activated-carbon-pellets.com/  Daily life: can be used in refrigerator deodorization, fruit and vegetable preservation, household water purifier, cigarette filter, deodorization and disease prevention insoles and other daily necessities production;Other aspects: can be used as catalyst carrier, stationary phase of gas chromatography, solar heat collector and precious metal production 
What is the difference between coconut shell activated carbon and columnar activated carbon?02021-02-02 17:57:10
1. First of all, it is clear from the appearance that the columnar activated carbon has the appearance of black cylindrical particles. coconut shell activated carbon for gold recovery The appearance of coconut shell activated carbon is black amorphous granular. 2. The difference between columnar activated carbon and coconut shell activated carbon in terms of material. The columnar activated carbon is made of fine anthracite as raw material and refined by advanced technology. Coconut shell activated carbon is made of fine coconut shell through a series of production processes. 3. Columnar activated carbon and coconut shell activated carbon have different physical and chemical indicators and components. Coconut shell activated carbon and columnar activated carbon can also be used for the purification of toxic gases, waste gas treatment, industrial and domestic water purification, solvent recovery, etc. buy bulk activated carbon pellets Based on the standards produced by activated carbon manufacturers, which one to choose depends on the needs of users and the scope of use. 4. The price of columnar activated carbon and coconut shell activated carbon can be said to be very different. Compared with coconut shell activated carbon with the same effective content or composition, the price of coconut shell activated carbon is much higher than that of columnar activated carbon. 
Adsorption effect of nonpolar small molecules and carbon layer on activated carbon02021-09-14 01:10:33
Activated carbon adsorption, is the use of activated carbon on the solid surface of the water adsorption or a variety of substances, in order to achieve the role of water purification. The adsorption of activated carbon is produced in two aspects.One is that the molecules inside the activated carbon are subjected to equal forces in all directions while the molecules on the surface are subjected to uneven forces.This makes other points adsorbed on its surface, which is physical adsorption;The other is due to the chemical action between activated carbon and adsorbed substances, which is chemical adsorption.The adsorption of activated carbon is the result of the comprehensive action of the above two kinds of adsorption.activated charcoal pellets  When the adsorption speed and desorption speed of activated carbon in the solution is equal, that is, the number of activated carbon adsorption is equal to the number of desorption, the concentration of the adsorbed material in the solution and the concentration on the surface of activated carbon are no longer intermingled, that is, to achieve the balance, the dynamic balance at this time is called activated carbon adsorption balance. www.chinactivecarbon.com  
Activated carbon decarbonization effect and carbon layer adsorption02021-09-14 19:22:53
In domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.  www.powdered-activated-carbon.com  Electrochemical modification is to change the electrical and chemical properties of activated carbon surface by using micro electric field, so as to improve the adsorption selectivity and performance.It does not need to add chemical agents, does not need to heat, does not cause pollution to the environment, low energy consumption, only a few hundred millivolts, easy to operate.The results show that the adsorption equilibrium of activated carbon is dependent on the electric potential: the adsorption amount of activated carbon increases with the increase of the potential, and the adsorption speed is accelerated;Arpolarity polarization is beneficial to the adsorption of chloroform by activated carbon, while cathodic polarization inhibits the adsorption of chloroform by activated carbon 3-341]. Activated carbon heteroatom carrier and compound modificationActivated carbon has very high stability and good activity, these two basic properties become the activated carbon as a catalyst or catalyst carrier conditions.By introducing certain heteroatoms and compounds on the surface of activated carbon by liquid phase deposition, the adsorption performance of activated carbon can be increased by using the binding effect between these substances and adsorbents.compounds, which has the advantages of increasing the reaction rate and increasing the adsorption capacity.Yang Quanhong et al. 'Using FESO;Activated carbon material was modified. pelletized activated carbon  The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon. 
I love activated carbon. Activated carbon is good for the environment02021-06-29 19:39:21
Activated carbon powder injection combined with bag dust collector (ACI+ BF) is an effective and widely used method to control dioxin emission from incinerator flue gas.https://www.activated-carbon-pellets.com/  In order to provide reference and theoretical basis for the preparation and selection of activated carbon for the adsorption of dioxins, this paper carried out a study on the combined technology of activated carbon injection and double bag dust collector, the characteristics of activated carbon adsorption for dioxins and the influencing factors of activated carbon adsorption for dioxins.The adsorption and desorption isotherms of 13 kinds of commercial activated carbon were determined by low temperature nitrogen adsorption method, and the physical structures of activated carbon were calculated according to BET, T-Plot, BJH and DFT theory, and the iodine value and methylene blue value of 4 kinds of activated carbon were detected. The physical structure characteristics of activated carbon were analyzed in detail to prepare for the subsequent experiment. Using small activated carbon fixed bed adsorption gas phase dioxin test bench, a typical activated carbon adsorption dioxin factors affecting the experimental study, discusses the types of dioxin adsorption activated carbon and activated carbon fixed bed adsorption gas phase characteristics of dioxins, and discusses the adsorption temperature and adsorption time of activated carbon adsorption of dioxins.The results showed that the specific surface area and micropore volume of activated carbon had weak correlation with the adsorption efficiency of dioxins.wan yang carbon   The mesopore volume of activated carbon is an important factor to determine the adsorption capacity of dioxins. The surface area of the pore size between 2 nm and 20nm plays a key role in the adsorption of dioxins.The higher the adsorption temperature, the lower the adsorption efficiency of activated carbon.The longer the adsorption time, the lower the adsorption efficiency of activated carbon.There is no selective adsorption of gaseous dioxins in activated carbon fixed bed. 
The shell of activated carbon02021-08-25 00:29:29
Principle of activated carbon adsorption activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detectionIn domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester. The preparation methods of activated carbon include physical method, chemical method, microwave radiation method, etc.(1) Physical method. activated charcoal pellets  Physical method is to use carbon dioxide, water vapor or the mixture of both as activator, the carbonized carbon material and gas in the activation furnace at 500~1200℃ for carbon activation reaction, so that the pore size of the carbonized material to expand, the formation of activated carbon with porous microcrystalline structure.Gas activation method mainly includes carbonization and activation engineering.The so-called carbonization, refers to the low temperature (about 500℃) is small, the volatile coal tar molecules in the material and the thermal decomposition and curing process of asphalt, that is, to remove the volatile in advance, made suitable for the next step of activation with carbonization.www.chinactivecarbon.com   When the temperature is below 600℃, the specific surface area of carbonized material increases with the increase of temperature.When 600~900℃, the specific surface area reaches a certain value: 250~300 m2/g; when above1000℃, the specific surface area shrinks rapidly. 
How to make better granular activated carbon02021-04-27 19:54:52
The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method.activated charcoal powder wholesale uk  Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc.yrd activated charcoal  The main principle of chemical activation method is the raw materials in 0.5~5 times the chemical activator impregnation for a certain time, in the process of heating, because of the dehydration of chemicals, the H and О elements in the raw materials in the form of water vapor released, the results produced a developed porous structure of activated carbon.The method requires the oxygen content in the raw material.25%, hydrogen content ≥5%[4], and most of the materials that can meet the requirements of this index are rice husk, wood and coal, etc 
How to make better granular activated carbon02021-09-06 18:57:51
Microwave heating can produce good effects in the preparation and modification of activated carbon (S2. Microwave modification, many backwater hole is opened, the distributed capacitance change obviously, promoting the improvement of the adsorption. The microwave power and irradiation time are key determinants of modified activated carbon adsorption performance. On the mechanism of microwave carbonization and activation, it is generally believed thatwww.powdered-activated-carbon.com  Plant waste is mostly made of plant fiber raw materials, in the plant body under the action of capillary, modified solution absorbed by material whole fully, between fiber is filled with the subtle space, make the dry material volume expansion after soaking wet, and reaction. Because of the water in the raw material, modified solution constitute a polar molecule, with a strong absorption of microwave dielectric properties,Therefore, polar molecules collide and rub violently with microwave frequency, generating a large amount of heat, which makes water and modified solution volatilize rapidly, and generate steam pressure, which explodes out from the inside of the raw material to the outside. This sharp action makes the fiber space of the raw material expand and produce sharp drying.In this way, the raw material has a more obvious pore structure and a larger internal specific surface area than before microwave irradiation. Compared with the traditional heating method, the mechanism of microwave in the preparation process of activated carbon is completely different.It shows its unique advantages: high efficiency, energy saving, uniformity, selectivity, low pollution, high thermal efficiency, low energy consumption, simple process and equipment and small footprint, conducive to automation, low carbon loss, and recovery of useful substances. pelletized activated carbon  
How to make better granular activated carbon02021-06-05 00:55:49
Acid-base modification is to use acid, alkali and other substances to treat activated carbon, according to the actual need to adjust the surface functional groups of activated carbon, make it change, improve its ability of adsorption of metal ions, so as to achieve the desired adsorption effect.Acid-base modification of activated carbon is usually carried out to improve the adsorption effect of activated carbon on metal ions represented by copper ions. The commonly used modifiers include HC1, NaOH and citrate 3.It was found that by acid-base modification of common coal activated carbon, the ash content of the activated carbon could be greatly reduced and the specific surface area of the activated carbon could be increasedactivated charcoal wholesale australia  Electrochemical modification is to change the electrical and chemical properties of activated carbon surface by using micro electric field, so as to improve the adsorption selectivity and performance.It does not need to add chemical agents, does not need to heat, does not cause pollution to the environment, low energy consumption, only a few hundred millivolts, easy to operate.The results show that the adsorption equilibrium of activated carbon is dependent on the electric potential: the adsorption amount of activated carbon increases with the increase of the potential, and the adsorption speed is accelerated;Arpolarity polarization is beneficial to the adsorption of chloroform by activated carbon, while cathodic polarization inhibits the adsorption of chloroform by activated carbon 3-341]. Activated carbon heteroatom carrier and compound modificationActivated carbon has very high stability and good activity, these two basic properties become the activated carbon as a catalyst or catalyst carrier conditions.By introducing certain heteroatoms and compounds on the surface of activated carbon by liquid phase deposition, the adsorption performance of activated carbon can be increased by using the binding effect between these substances and adsorbents.compounds, which has the advantages of increasing the reaction rate and increasing the adsorption capacity.Yang Quanhong et al. 'Using FESO;Activated carbon material was modified.https://www.dxdcarbon.com/  The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon. 
How to make better granular activated carbon02021-08-25 23:58:17
Principle of activated carbon adsorption activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purification effect. Activated carbon surface area of the study is very important, only the BET specific surface area detecting data of active carbon method detected result is reliable, domestic at present there are many instruments can only make direct comparison method of detectionIn domestic has been eliminated. Specific surface area test unified the multi-point BET method at home and abroad, specific surface area measurement standards are developed at home and abroad is based on BET test method, please see our national standard (GB/T 19587-2004) - gas adsorption BET principle of solid material specific surface area measurement methods. Specific surface area testing is actually the more time-consuming jobs, as the adsorption capacity of sample is different, some sample testing may need to spend the whole dayTime, if the test process is not fully automated, the tester can not leave at any time, and should be highly focused, observe the dashboard, control the knob, a little careless will lead to the failure of the test process, which will waste a lot of valuable time of the tester.www.powdered-activated-carbon.com  F - Sorb 2400 specific surface tester is really able to BET method detection instruments (both direct comparison method), the more important F - Sorb 2400 specific surface tester is by far the only specific surface area of the fully automated intelligent testing equipment, the test results with the international high consistency, the stability is very good also, at the same time reduce the human error, improve accuracy test results.pelletized activated carbon  The adsorption capacity of activated carbon on each gas (unit: mL /cm3):H2, O2, N2, CI2, CO2 4.5, 35, 11, 494, 97 The main factors affecting the adsorption of activated carbon ① the nature of activated carbon adsorbent The larger the surface area, the stronger the adsorption capacity; Activated carbon is a non-polar molecule, easy to adsorb non-polar or very low polarity adsorbent; The size of the activated carbon adsorbent particle, the structure and distribution of the fine pore and the surface chemical properties also have a great influence on the adsorption. (2) the nature of the adsorbent Depends on its bath solubility, surface white energy, polarity, adsorbate molecule size and unsaturation, the concentration of adsorbate, etc ③ Wastewater pH value Activated carbon generally has a higher adsorption rate in acidic solution than in alkaline solution. The pH value will affect the state and bath solubility of the adsorbent in the water towel, thus affecting the adsorption effect. ④ Coexisting substances When a variety of adsorbates coexist, the adsorption capacity of activated carbon to a certain adsorbate is worse than that containing only the adsorbate (5) temperature The effect of temperature on the adsorption of activated carbon is small 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions