How to make better granular activated carbon related questions

Answers
Asked by
Updated
How to make better granular activated carbon02021-04-27 00:12:37
By single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperatureIs the activator concentration Pyrolysis time >Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbonactivated carbon company  The concentrations of heavy metals in activated carbon leaching solution of sludge were all qualified.Compared with domestic and foreign research reports, the quality of PAC is in the middle level.(5) Compared with SAC, the specific surface area of PAC is larger, up to 636.8m2·g'. PAC is mainly mesoporous, but also contains some micropores. The adsorption/desorption isotherm shows that PAC is activated carbon with parallel wall slit pore structure. Distillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃. ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on.www.coconutactivatedcarbon.com  Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface. 
How to make better granular activated carbon02021-06-30 19:03:10
(1) coal-based activated carbon, also known as coal-based activated carbon. It is a general term for a large class of activated carbon products made of various raw coal through different processes.Coal-based activated carbon can be divided into molding carbon and raw coal direct crushing carbon according to the different manufacturing process.dxdcarbon.com  The former and can be further subdivided into wet molding charcoal (such as tar, papermaking black liquor, such as starch paste liquid adhesive manufacturing columnar, ball charcoal, honeycomb carbon, etc.) and dry molding charcoal (such as join solid bitumen, starch, such as tree powder as adhesive used for Mao briquette made of molding process, tabletting, pelleting and broken charcoal or rules of pelleting shape activated carbon).activated carbon manufacturers  Generally speaking, forming carbon can be mixed with a variety of raw coal to adjust the pore distribution characteristics of the final product, so as to obtain some special application performance, and more than 80% of the pore distribution characteristics of raw coal directly broken carbon has been determined by the raw material, so the performance and use is simple. (2) wood activated carbon.It is mshell/core activated carbon.Such as coconut shell carbon, apricot kernel carbon, peach kernel carbon, etc.(4) petroleum activated carbon.Using petroleum asphalt, petroleum coke as raw materials, made of activated carbon products.resin activated carbon.Using phenolic resin, waste ion exchange resin as raw materials, through a special process of activity.Carbon products, sometimes fibrous carbon also falls into this category.High - definition watermark of cut document under air(6) other small varieties of activated carbon products. Made of animal blood blood carbon, made of animal bones bone charcoal (there is very little, but bone charcoal carbon main ingredients of hydroxy calcium phosphate), with active carbon molecular sieve made of various materials, made of strong base and carbon materials of high surface area activated carbon, is made of organic polymer solution after mold made of special process method of activated carbon, activated carbon aerogels and so on. 
How to make better granular activated carbon02021-09-02 00:17:08
Microwave method, microwave method is not independent of the physical method and chemical method of the preparation of activated carbon, but on the basis of the physical method and chemical method instead of the traditional heating method, but it has a very significant effect. activated charcoal pellets Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent. The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. The kinetic activity value of adsorbent is the main basis for the design of adsorption system.activated charcoal pellets  The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps 
How to make better granular activated carbon02021-06-02 19:09:43
Adsorption capacity refers to the amount of adsorbents adsorbed on the adsorbent per unit mass under certain conditions. It is usually expressed in terms of K adsorbents /kg of adsorbent or mass percentage, which is a sign of the adsorption capacity of the adsorbent. In industry, the amount of adsorption is called the activity of the adsorbent. The activity of the adsorbent can be expressed in two ways :(1) the static activity of the adsorbentUnder certain conditions, the equilibrium adsorption capacity of the adsorbent is its static activity.For a certain adsorption system, the static activity depends only on the adsorption temperature and the concentration or partial pressure of the adsorbed substance. Dynamic activity of adsorbents wholesale activated carbon pellets  Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent.manufacturers of coconut shell activated carbon in china  The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions. Activated carbon is porous carbon material, has a strong adsorption capacity,Widely used in air purification, wastewater treatment and other fields.The reactive nitric acid is placed in an environment to absorb radon gas, and then Y measurement is carried out, which can be pushed Calculate the radon concentration in the environment.Activated carbon Y energy spectrum is one of the main methods for measuring radon.In 1957, Mirandajr "used activated carbon as an adsorber to measure radon concentrations in the atmosphere;Since then, many scholars have carried out a series of theoretical and experimental studies on the method of measuring radon on activated carbon, and it has been widely used in the study of radon release rate 23. In 1986, Lin Lianqing et al. carried out radon measurement by activated carbon. In 1993, China promulgated the national standard 5 for the method of measuring radon by activated carbon V energy spectrum. Since then, this method has been popularized and applied in China, and has achieved satisfactory results in the determination of radon release rate and radon concentration in air L6-8.The radon measurement by activated carbon mainly measures the energy spectrum peak of 2Pb or 21Bi, and the radon concentration value is calculated from the net peak area. This method can distinguish 2Rn daughters, which is convenient for attenuation correction, and has a strong anti-interference ability for other Y radiators (such as 2Rn and its daughters, etc.).However, it requires high energy resolution and low counting rate. The theoretical basis, attenuation correction and standing time of this radon measurement method are discussed. 
How to make better granular activated carbon02021-06-30 01:41:35
Activated carbon is a carbon adsorption material with coal, wood and nut shell as raw materials, used in gas adsorption. Separation, purification and separation of liquid purification and other fields.wan yang carbon  The industrial application of activated carbon by appearance distinguish forming granular activated carbon, are there not finalize the granular activated carbon, powdered activated carbon, activated carbon fiber, etc., main application fields including wastewater treatment, activated carbon depth clean drinking water, medicine and food decolorizing refining, precious metal extraction, gas separation and purification, solvent recovery, and military and civil protection.https://www.activated-carbon-pellets.com/  Taking coal as raw material to the production of coal based activated carbon is a kind of has a developed interspaces structure of carbonaceous adsorption material, has good chemical stability and mechanical strength, coal based activated carbon products can be widely used in decoloring purification, solvent recovery, gas separation, gas purification, and various kinds of water treatment and other fields, some through special processing, the special T also can be used as a high-performance activated carbon desulfurization agent, catalyst and catalyst carrier, mountain in the acid and alkali resistant, heat resistant, granular activated carbon on adsorption saturation after failure, can be a party to regenerate. The application of coal-based activated carbon is divided into liquid phase and gas phase according to the characteristics of the material. The liquid phase is mainly used in decolorization, recovery of precious metals and water treatment. Gas phase is mainly used in gas purification and recovery, industrial waste gas treatment, flue gas desulfurization and gas protection, etc. In recent years, some foreign activated carbon manufacturers have developed coal-based activated carbon with special adsorption capacity by adopting new processes, new methods and advanced raw material treatment technology, which has greatly improved and enhanced the performance of coal-based activated carbon products, expanded the application field and highlighted a broader market prospect. 
How to make better granular activated carbon02021-06-02 19:22:36
Activated carbon, is black powder or block, granular, honeycomb amorphous carbon, but also a regular arrangement of crystalline carbon.In addition to carbon elements, activated carbon also contains two kinds of admixtures: one is the chemical combination of elements, mainly oxygen and hydrogen, these elements are due to incomplete carbonization and residual in the carbon, or in the activation process, foreign non-carbon elements and activated carbon surface chemical combination;Another kind of admixture is ash, which is the inorganic part of activated carbon, and ash in active carbon is easy to cause secondary pollution.Because of its strong adsorption, activated carbon is widely used in production,In the life.Activated carbon material is processed by the amorphous carbon, has a large specific surface area, the gas, solution of inorganic or organic matter and colloidal particles have good adsorption capacity.Activated Carbon materials mainly include Activated Carbon (AC) and Activated Carbon Fibers (ACF), etc.Activated carbon material as a kind of excellent adsorbent, mainly because of its unique adsorption surface structure and surface chemical properties.Activated carbon material has stable chemical properties and high mechanical strength. https://www.activated-carbon-pellets.com/  The selection of treatment technology should be based on the gas volume, purification requirements, the possibility of recovery, the economy of equipment construction and operation and other conditions. Special attention should be paid to the close cooperation with the process in practical work, so as to achieve comprehensive utilization as far as possible.dxd activated carbon  At present, there are three common methods of organic waste gas treatment at home and abroad: liquid absorption method, activated carbon adsorption method and catalytic combustion method. 
How to make better granular activated carbon02021-12-07 19:06:13
Chapter 1 This project adopts the company's own large amount of monolayer stone which can be dried and preserved and treated with solution activated carbon for gold recovery  Preparation method of graphite namely graphene.activated carbon wholesale  Raw materials are commonly used graphite and common chemicals, easy to operate, easy to enlarge. It solves the problem that graphene materials are expensive and cannot enter the field of industrial application without large-scale production. It provides a basis for large-scale application of graphene.Using the super conductivity and large specific surface area of graphene solves the problem that the traditional activated carbon material can no longer improve the electric storage performance when used on the electrode. Complete set of equipment in addition to solve the industrial method of graphene liquid phase composite to activated carbon materials for super capacitor, and can be activated activated carbon materials at room temperature. Complete sets of equipment meet the requirements of cleaner production. Chapter 2 The quality of graphene prepared by this project is guaranteed. The graphene prepared by white has a high monolayer rate (up to 99%), fewer defects, and can be dried for a long time. Can be prepared into a variety of solutions to facilitate compounding with other materials. Raw material is natural graphite from a wide range of sources, is prepared by industrial methods can be scaled up production. To make the industrial application of graphene possible, promote the advancement of high-tech materials, and promote industrial development. 
How to make better granular activated carbon02021-12-07 19:34:58
These changes more or less to the original system and production process caused a certain impact, these new problems caused by the change of raw materials must be solved, to ensure the production of efficient and stable operation.activated carbon wholesale  In view of the characteristics of large amount of matter and high content of benzene organic matter in gas, the method of removing these substances is studied and the solution is given. activated carbon for gold recovery  In this study, the concentration of benzene, naphthalene and ash in gas before purifying feed-gas compressor was determined by chromatograph, picric acid titration and weighing method respectively. According to the measured values, the experimental flow was designed, and coke column and activated carbon column were made by themselves. The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples. The adsorption effluent curve of benzene by activated carbon was plotted. The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied. The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions. At the same time, the filtration and adsorption properties of coke were tested. The experiment shows that the adsorption performance of the test coke on benzene is very weak, can not be used as the nitrogen adsorbent, but the coke filter and adsorption performance of ash and naphthalene is very good, the content of naphthalene and ash after the gas through the coke column completely meet the design requirements. The results show that the combined use of coke and activated carbon in the gas system can completely achieve the purpose of removing benzene, naphthalene and ash. According to the above research results, a coke filter was designed. The application of the equipment solved the problems that the feedstock gas compressor in the urea blackening unit could not run for a long period due to the vibration caused by the scaling of the rotor, the blockage of the flow channel and the problems that the naphthalene formation in the heat exchanger affected the heat transfer effect. 
How to make better granular activated carbon02021-12-07 22:41:23
The commonly used activation gases are carbon dioxide, water vapor, oxygen, etc., due to the oxidation reaction of these gases on the surface of the carbonized substance, eroding the carbonized substance, thus producing a rich porous structure.(2) Chemical method.activated carbon for gold recovery  Chemical activation method is a method of preparing activated carbon by adding chemicals to the raw materials used or impregnation into the raw materials or carbonized materials, and then heating it at high temperature in inert gas.The chemicals used in chemical activation are generally dehydrating.The more commonly used activator is: inorganic acid varieties have phosphoric acid, sulfuric acid and boric acid, salt varieties have zinc chloride, calcium carbonate and potassium sulfate, alkali varieties have sodium hydroxide, potassium hydroxide, etc. activated carbon wholesale 
How to make better granular activated carbon02021-06-05 00:55:49
Acid-base modification is to use acid, alkali and other substances to treat activated carbon, according to the actual need to adjust the surface functional groups of activated carbon, make it change, improve its ability of adsorption of metal ions, so as to achieve the desired adsorption effect.Acid-base modification of activated carbon is usually carried out to improve the adsorption effect of activated carbon on metal ions represented by copper ions. The commonly used modifiers include HC1, NaOH and citrate 3.It was found that by acid-base modification of common coal activated carbon, the ash content of the activated carbon could be greatly reduced and the specific surface area of the activated carbon could be increasedactivated charcoal wholesale australia  Electrochemical modification is to change the electrical and chemical properties of activated carbon surface by using micro electric field, so as to improve the adsorption selectivity and performance.It does not need to add chemical agents, does not need to heat, does not cause pollution to the environment, low energy consumption, only a few hundred millivolts, easy to operate.The results show that the adsorption equilibrium of activated carbon is dependent on the electric potential: the adsorption amount of activated carbon increases with the increase of the potential, and the adsorption speed is accelerated;Arpolarity polarization is beneficial to the adsorption of chloroform by activated carbon, while cathodic polarization inhibits the adsorption of chloroform by activated carbon 3-341]. Activated carbon heteroatom carrier and compound modificationActivated carbon has very high stability and good activity, these two basic properties become the activated carbon as a catalyst or catalyst carrier conditions.By introducing certain heteroatoms and compounds on the surface of activated carbon by liquid phase deposition, the adsorption performance of activated carbon can be increased by using the binding effect between these substances and adsorbents.compounds, which has the advantages of increasing the reaction rate and increasing the adsorption capacity.Yang Quanhong et al. 'Using FESO;Activated carbon material was modified.https://www.dxdcarbon.com/  The experimental results show that the surface structure of the activated carbon material modified by FeSO changes: the specific surface area decreases, the surface oxygen content increases, the plane of the random layer graphite carbon net is destroyed to a certain extent, and the ammonia absorption capacity and benzene absorption performance of the sample are greatly enhanced.He ChunHong et al. [reported the research progress of supporting activated carbon materials in the removal of SO; the removal ability of SO was significantly enhanced after supporting Co, Ni, Mg, and V compounds, which was due to the formation of Co(OH)2, Ni(OH)2, Mg (OH)2, and V,0 microcrystals on the surface of activated carbon after supporting, which enhanced the desulfurization activity of activated carbon. 
How to make better granular activated carbon02021-12-17 00:15:13
In view of the characteristics of large amount of matter and high content of benzene organic matter in gas, the method of removing these substances is studied and the solution is given. In this study, the concentration of benzene, naphthalene and ash in gas before purifying feed-gas compressor was determined by chromatograph, picric acid titration and weighing method respectively. According to the measured values, the experimental flow was designed, and coke column and activated carbon column were made by themselves. www.powdered-activated-carbon.com  The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples.The adsorption effluent curve of benzene by activated carbon was plotted.activated carbon pellets wholesale   The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied. The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions. 
How to make better granular activated carbon02021-12-07 22:44:10
Its adsorption is selective, and non-polar substances are easier to be adsorbed than polar substances.In the same series of substances, the higher the boiling point of the substance, the more tolerantEasy to be adsorbed, the greater the pressure, the lower the temperature, the greater the concentration, the greater the amount of adsorption.On the contrary, decompression and heating are beneficial to gas desorption.It is often used for gas adsorption,Separation and purification, recovery of solvents, decolorizing agents for sugar solution, grease, glycerin, medicine, deodorant for drinking water and refrigerators, filter agent for gas masks,It can also be used as a catalyst or metal salt catalyst carrier.Early production of activated carbon raw materials for wood, hard nut shell or animal bones, later mainly used coal, after dryingDistillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃.activated carbon gold mining  ② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on. activated carbon company  

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions