Why The Charcoal Briquette Machine Charcoal Making Machine So Popular related questions

Answers
Asked by
Updated
Why The Charcoal Briquette Machine Charcoal Making Machine So Popular02020-04-27 00:36:00
The charcoal briquette machine equipment composed of a variety of machines. The normal charcoal briquette production line is composed of several types of machines: crusher machine, dryer machine, carbonization furnace, and charcoal briquette machine. It can also be increased or reduced according to the different raw materials. For example, when sawdust used as a raw material, there is no need to crush the raw material, it is possible to reduce the investment of the crusher machine. Customers who are interested in investing in the charcoal briquette machine equipment can consult us. Why the charcoal briquette machine so popular, is it a very promising development prospect? It can be said that the sales of charcoal making machine equipmnet are very popular now, and its environmental protection and energy saving. From this point of view, its development prospects are very good. Reduce environmental pollution and avoid waste of forest resources, making the charcoal machine industry occupy an important position in today's society. The birth of the charcoal making machine industry has reduced the waste of forest resources. Charcoal briquette machine mainly uses straw, fruit shells, agricultural and forestry wastes as raw materials. Not only does it avoid waste, but it also allows waste resources to be reused. The mechanism charcoal has many uses, and it is also an important reason for the good development prospects of the charcoal briquette machine industry. The machine-made charcoal can be used for barbecue food, no smoke smell, clean and hygienic, and can also replace coal for household heating. The machine-made charcoal has a greater calorific value than coal and is more resistant to burning. The mechanism charcoal can also be processed into chemical raw materials, can be made into activated carbon, silicon carbide, crystalline silicon, carbon disulfide, the use is very broad. For example, industries such as smelters, copper plants, steel plants, rubber plants, etc. require large amounts of machine-made charcoal, and the amount is very large. The mechanism charcoal produced by the charcoal making machine can also be used in daily life, such as mosquito coils, the mosquito coil factory requires mechanism charcoal to make mosquito coils. From the above description, the sale of machine-made charcoal is very good, so as a production equipment, charcoal briquette production line equipment is also very popular. 
BBQ Charcoal Machine Charcoal Briquette Making Machine Equipment02020-05-18 01:27:44
The BBQ charcoal machine mainly used for pressing powder materials. It is characterized by high molding pressure, the number of revolutions of the main engine is adjustable, and it equipped with a screw feeding device. BBQ Charcoal Machine Introduction The BBQ charcoal machine has advanced technology, reliable quality, multi-purpose machine, and strong pressure. It is suitable for large, medium and small enterprises to establish a production line with a certain production scale. It is suitable for various moldings of industrial gasification, boiler type, cold pressing type focus, ignition type coal, civil type coal, civil metallurgy, refractory materials, medicine and other materials. The charcoal briquette machine has been used and improved for many years. Compared with other charcoal briquette making machine, it has the advantages of high ball formation rate, low power consumption, compact structure, and easy inspection and debugging. Functional Use Of The BBQ Charcoal Machine The charcoal press machine can be used to suppress various powders such as coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, and coke. It widely used in refractory materials, power plants, metallurgy, chemical industry, energy, transportation, heating, and other industries. After molding, the formed materials are energy-saving and environmentally friendly, easy to transport, and improve the utilization rate of waste. It has good economic benefits and social benefits. Structural Of The Machine The BBQ charcoal machine consists of three parts: the feeding part, the transmission part, and the forming part. 1. Feeding part. Mainly to achieve quantitative feeding to ensure that the material evenly enters between the rolls. The screw feeding device is driven by the electromagnetic speed regulating motor, and is rotated by the pulley and the worm reducer to force the pressed material into the main feeding port. Due to the constant moment characteristic of the electromagnetic speed regulating motor, when the amount of material of the screw feeder is equal to the amount of material required by the main machine, a constant supply pressure can maintain to stabilize the quality of the pellet. If the feeding amount is too large, the feeding device is overloaded. If the feeding amount is too small, the ball is not formed. Therefore, the skilled operation technique is an important condition for ensuring the normal operation of the ball. 2. Transmission part. The main drive system is: motor - triangular belt - reducer - open gear - roll. The main engine is powered by an electromagnetic speed regulating motor, which is transmitted to the driving shaft through a pin and pin coupling through a pulley and a cylindrical gear reducer. The drive shaft and the passive shaft ensure synchronized operation through open gears. The passive bearing housing is equipped with hydraulics at the rear. The hydraulic protection device is driven by a hydraulic pump to drive high-pressure oil into the hydraulic cylinder, and it causes axial displacement of the piston. The front joint of the piston rod is placed on the bearing housing to meet production pressure requirements. 3. Forming part. Mainly refers to the main part, the core part is the roll. When the feed between the two pressure rollers is too much or enters the metal block, the hydraulic cylinder piston rod is under pressure overload, the hydraulic pump will stop, the accumulator will buffer the pressure change, the relief valve will open the oil return, and the piston rod will displace. The gap between the pressure roller is increased to allow the hard object to pass through the pressure roller, and the system pressure returns to normal, thereby protecting the pressure roller from damage. Working Principle Of Machine Through the belt, it is transmitted to the reducer, and the reducer passes through the coupling to the drive shaft and then by a pair of open gears to ensure that the two rollers are synchronized (equal speed reverse) material storage bins uniformly enter the forming hopper through the quantitative equipment. The unit forming pressure of the material is changed from small to large, and the forming pressure reaches the maximum at the center line of the pair of rolls. After the material passes the line, the forming pressure is rapidly reduced to make the material enter the off-ball state and smoothly take off the ball.  
Talk About Charcoal Briquette Machine Charcoal Making Machine02020-04-26 00:46:01
Charcoal briquette machine is the main equipment to make rodlike solid fuel under high pressure and high temperature by using wood, rice husk, peanut husk, plant straw, and other materials containing carbon wood (without any additives). Machine-made charcoal has the advantages of high density, small volume, good flammability, smoke-free, tasteless, non-toxic, etc. It’s widely used in heating, BBQ market. In the industrial area, it’s the alternative raw material of coal or heavy oil. Raw Materials For Making Mechanism Charcoal Many materials suitable to make the charcoal briquette, if the wood logs are available, they are very suitable to make the charcoal briquette directly. But since the forest resources are limited, and also this will add the cost, so more wood waste, branches, sawdust, agro waste become alternative raw materials. But these materials need some special process before they become charcoal briquette. Charcoal making machine adopts automatic thermostatic device, which can work stably at a set temperature, and has the advantages of reasonable structure and simple operation and maintenance. The solid bar material produced by this machine is easy to ignite after carbonization, with high calorific value (more than 20% higher than the general wood), fewer pollutants, more convenient to store and transport, and can make full use of the remaining crop material, to turn waste into treasure, and reduce the contradiction of energy shortage of agriculture and forestry. The Carbonization Furnace Is Indispensable In The Charcoal Briquette Production Line The carbonization furnace can be used to carbonize semi-finished that produced through charcoal briquette machine, and can also directly carbonize logs. The following mainly introduces the contents of the airflow carbonization furnace. The airflow carbonization furnace uses the semi-finished products of the bar in the furnace, and the heat generated by the surface oxidation combustion (flameless) after ignition causes the fuel bar to decompose and carbonize. And then it generates flammable gas, tar, and char in the process of decomposition. The flammable gas is mixed with a small amount of oxygen entering the furnace. And then oxidized to generate more heat, further maintaining the temperature in the furnace to meet the heat required for the decomposition of the fuel bar. The charcoal briquette machine of Fusmar Machinery sells well in domestic and foreign markets and enjoys a high welcome among consumers. With years of experience, Zhengzhou Fusmar has established a complete and effective service system and built an experienced service team. We will carry out and after-sales tracking service for the charcoal briquette production line equipment sold. 
Use Charcoal Briquette Making Machine For Smokeless Clean Charcoal02019-11-11 22:53:44
Machine-made charcoal also called smokeless clean charcoal, it is a kind of carbonaceous stick made of wood chippings extruded through a charcoal briquette making machine. The raw materials of charcoal sticks come from a wide range of sources, like rice husks, peanut shells, cotton shells, corn cobs, corn stalks, and sorghum stalks can all be used as raw materials to produce charcoal sticks. Sawdust, shavings, and bamboo chips as raw materials are the best. Machine-made charcoal has high density, high calorific value, smokeless, tasteless, pollution-free, non-explosive, and inflammable. The Production Of Smokeless Clean Charcoal Wood shavings (sawdust), tree branches, rice husks, bamboo shavings, peanut skins, sunflower seed shells, furfural residues, wine residues, bagasse, corn cobs, coconut shells, coffee shells, and crop straws are used as raw materials.After the dryer drying into the appropriate humidity standard raw materials, then into the charcoal briquette making machine, after the high temperature and high-pressure molding into sticks (semi-finished products). Finally, through the carbonization furnace (carbonization furnace forms a variety of, generally is brick kiln) carbonization into finished mechanism charcoal. Mechanism Charcoal And Other Charcoal Difference 1. Environmental protection.Do not cut down trees, using bamboo products waste production, turn waste into treasure.The production of ordinary charcoal to cut down trees, destroy the ecological environment. 2. High energy.The fixed carbon content is about 80% with a calorific value of 7500-8000kcal/kg, while the fixed ordinary charcoal content is low with a calorific value of 6500kcal/kg. 3. Cleanliness.Smokeless no charcoal head, combustion no spark. During the combustion, the residual ash naturally falls down and does not float up. Ash content 3% or 6% after combustion residual ashless, flammable. 4. Shape rules, reasonable structure, easy to use.Uniform length, size, hollow or solid construction, suitable for combustion and use. 5. Water content is low, within 5%.Ordinary charcoal has large water content. 6. The product contains no chemical substances, no toxic odor, no pollution, long burning time, and other advantages. Classification Of Mechanistic Charcoal Low-temperature Charcoal Low-temperature charcoal is loose in texture, low in carbon content and poor in mechanical strength. It is used in industry and agriculture (such as silicon smelting plant), heating, and hot pot. Medium-temperature Charcoal The texture of medium-temperature charcoal is closer than that of low-temperature charcoal, and the carbon content is slightly higher than that of low-temperature charcoal.It is mainly used for barbecue, in addition to, industrial and agricultural, heating, and hot pot. High-temperature Charcoal High-temperature high-quality charcoal is hard and solid, heavy to handle in hand. It can sink in water, can make steel sound when struck, has high carbon content, low volatile content and ash content, no flame when burning. The burn resistance is three times that of low-temperature charcoal and two times that of medium-temperature charcoal. It is suitable for all occasions with charcoal, especially for high-grade barbecue and export. Market Prospect The mechanism charcoal market is broad. Catering (barbecue, hot pot, etc.) is used as charcoal for the barbecue. The mechanism charcoal density is more than three times that of ordinary charcoal, burning smokeless. Industrially, mechanical charcoal is used in the production of carbon disulfide and steel smelting. It is also used as a supplementary fuel for boilers. Its density is similar to that of coal, with a calorific value of 5,500-7,000 kcal /KG, but its ash content is significantly lower than that of coal. The use of mechanism charcoalis broad, and the raw materials are relatively wide. The market sales are also dominated by large cities, and the demand is quite large. The investment threshold of mechanism charcoal is low, but the technical requirements are relatively high. In the initial stage of production, if the technical level does not meet the requirements, the loss is also possible. Hope this article can help you to know more about mechanism charcoal with the charcoal briquette machine. If you want to build a charcoal briquette plant, please contact us. 
Charcoal Powder Briquette Machine Briquette Making Machine Manufacturer02019-09-23 01:54:42
Charcoal powder briquette machine is a series of charcoal briquette machine equipment with the technical content of equipment. Using the principle of screw extrusion, the prepared powder charcoal is compressed into a briquette making machine with a certain strength and predetermined shape. Charcoal Powder Briquette Machine Introduction Charcoal powder briquette machine also called briquette making machine, mainly includes frame, bearing, screw axis, barrel outlet, and charcoal briquettes of mold, charcoal briquette machine is using the principle of screw extrusion,, is widely used in coal, coal, coal gangue, coking coal, lignite, anthracite coal, iron powder, aluminum powder as raw materials to make briquette. Using a charcoal powder briquette machine to make briquette can fully use charcoal powder, in the process of production does not need to add lime, reduce the cost of fuel, and improve the calorific value of coal, with high economic benefits. Charcoal Powder Briquette Machine Features 1. The outlet is lined with a wear-resistant sleeve and a charcoal mold, which is blocked by the nut at the outlet end. 2. The pitch of the spiral blade of the spiral axis gradually decreases from right to left.There is a dirt baffle between the charcoal briquette machine barrel body and the bearing seat, and an oil seal side. There is a sewage outlet on the barrel body between the dirt baffle and the dirt baffle plate. 3. The inner wall of the wear-resistant sleeve of the charcoal briquette machine barrel body has a number of anti-wear grooves, and the anti-wear grooves are not connected by one end of the discharge port. 4. The charcoal mold center of the briquette making machine has a convex guide. 5. Charcoal powder machine wear-resistant sleeve and screw shaft blade friction surface spray with hard alloy powder. Working Principle Of The Charcoal Powder Briquette Machine Charcoal powder briquette machine is a machine to make different shapes of raw coal into bars. The motor passes the power to the transmission through the triangle belt, the transmission output shaft passes the power to the propulsion shaft through the floating coupling, and the propeller on the propulsion shaft pushes the coal through the molding die head to produce the ideal high-pressure coal bar. Advantages Of Charcoal Powder Briquette Machine Advantage 1: Various styles Mold patterns have plum blossom, triangle, quadrilateral, diamond, and other styles, can be customized according to customer requirements. Advantage 2:Good finished product with high strength Stable operation, low noise, small wear, long life. High output, low energy consumption, high performance-to-price ratio, high finished product strength. Advantage 3:Good steel quality Improve the service life of the whole machine, easy to repair, reduce consumption, safe and reliable operation, quality assurance. Advantage 4:Accessory alloy reamer The fittings of briquette making machine are reamer, the reamer is made of alloy, wear-resistant, durable, efficient and energy-saving, widely used. The mechanical equipment of Fusmar sells well in domestic and foreign markets and enjoys a high welcome among consumers. With years of hard work, Zhengzhou Fusmar has established a complete and effective service system and built an experienced service team. We will carry out after-sales tracking service for the charcoal briquette machine equipment sold. 
Charcoal Briquette Machine Is Becoming More And More Popular02020-06-08 00:34:04
Charcoal briquette machine is the main equipment to make rodlike solid fuel under high pressure and high temperature by using wood, rice husk, peanut husk, plant straw, and other materials containing carbon wood. Machine-made charcoal has the advantages of high density, small volume, good flammability, smoke-free, tasteless, non-toxic, etc. It’s widely used in heating, BBQ market. In the industrial area, it’s the alternative raw material of coal or heavy oil. Environmental Protection Charcoal Briquette Machine The emergence of environmental protection charcoal briquette machines reduced environmental pollution and avoided the waste of forest resources. Environmentally friendly charcoal making machine equipment equipped with purification equipment, which can not only remove excess dust but also make full use of dust recycling, to achieve the effect of energy-saving and environmental protection. The mechanism charcoal machine manufactured by Fusmar Machinery avoids the situation of heavy smoke and dust, and also improves the pollution problem in the production process. It greatly improves the working environment of workers, reduces the waste of raw materials in its production, and brings great benefits to investors’ profit. The Ideal Material For Charcoal Briquette Machine The raw materials for making machine-made charcoal are very rich. The raw materials for making charcoal are sawdust, rice husk, melon seed skin, coconut shell, medicinal residue, bamboo, walnut peel, branch, bark, tree trunk, wine residue, vinegar residue, furfural residue,peanut shells, various hardwood, nutshells, and so on. These can be used to make charcoal. The new charcoal briquette production line equipment is mainly to deal with garbage and waste utilization. Therefore, did not say what kind of raw material made of charcoal is good and which kind of raw material is poor in quality. Although the effect of wood charcoal made from various raw materials is similar. There is still a little difference, that is, the technology of making carbon. According to our experience, the quality of carbon produced by hard mixed wood is better than that of straw husk. If there is no good carbon production technology, the difference between the calorific value produced by the two will not be too big. So to say that to make high-quality mechanism charcoal, not only must there be good raw materials, but also good charcoal burning technology. Fusmar Machinery has manufactured a set of charcoal briquette production line equipment with environmental performance. The smoke treatment compliance rate has reached 90% or more, forming a smokeless and environmentally friendly charcoal production line, which has been recognized by customers. If you want to successfully produce charcoal, choose Fusmar mechanism charcoal machine, environmentally friendly and efficient.  
Charcoal Briquette Machine Uses In The Small Charcoal Briquette Production Line02019-11-03 22:31:36
Protecting the environment is the responsibility of people. Nowadays, environmental protection is very important in various countries, and policies related to environmental protection are constantly being introduced. The burning of traditional charcoal is also a major factor causing environmental pollution. So now is the time to invest in charcoal briquette machine equipment, the use of wood chip charcoal determines its economic benefits. Small Charcoal Briquette Production Line The minimum output of the charcoal briquette machine is 1 ton per day, so the characteristics of the small-sized charcoal machine equipped with the air dryer are particularly reasonable. High thermal efficiency: Airflow drying uses material and gas co-current operation. The material temperature and air temperature can reach the proper state from the beginning to the end, and the drying time is short, so the higher drying temperature can be used. The airflow carbonization furnace carbonizes the quality and output of the finished carbon, so the application of the carbonization furnace in the charcoal briquette production line is very important. At the same time, the negative gasification surface is continuously renewed due to the dispersion and agitation during drying, and therefore, the heat transfer process of the drying is strong. The small charcoal briquette production line includes raw materials hammer mill, dryer, charcoal briquette machine, and carbonization furnace. These links are complementary. The airflow dryer has the following advantages: because the airflow speed is high, the material is well dispersed in the gas phase, and the entire surface of the material can be used as an effective area for drying. Therefore, the limited area of drying is greatly increased. The mechanism charcoal produced by charcoal briquette machine can replace non-renewable resources such as coal and gas not only environmental protection and sanitation. Small Charcoal Briquette Production Line Processing Method 1. Crushing.The raw material is crushed into particles by a pulverizer. 2. Drying.Then the particles through the dryer drying, do not want to grasp the moisture. 3. Mechanism CharcoalMaking.After drying the material through the charcoal briquette machine into a stick. 4. Finally,through carbonization furnace carbonization. After cooling, forming the finished charcoal. Mechanism Charcoal Characteristic Mechanism charcoal is a waste renewable energy fuel, calorific than the same raw materials of charcoal, higher than the general coal, smokeless, tasteless, clean sanitation. It can be widely used for home heating, barbecue food international market demand is large. It can replace coal or heavy oil fired steam boiler in industry, also be used as chemical raw materials for deep processing of activated carbon, silicon carbide, crystalline silicon, and so on. Mechanism charcoal is the carbon disulfide plant, mosquito - repellent incense plant, copper processing plant, foundry essential raw materials. Fusmar machinery as a responsible manufacturer, the purpose is to create good equipment for the majority of customers. Charcoal briquette machine equipment producesthe mechanismcharcoal for people to use while ensuring environmental protection. Fusmar charcoal briquette machine equipment has complete specifications, perfect detection means, novel design, stable performance, and convenient operation. The products are sold all over the country and exported to overseas. It is your best choice. 
What Are The Functions Of Charcoal Briquette Machine In Charcoal Briquette Production Line02019-12-18 22:37:27
Charcoal briquette production line equipment includes crusher, dryer, charcoal briquette machine, carbonization furnace. Today, let's talk about the functions of the charcoal briquette machine. The charcoal briquette machine also called stick making machine. Its products can divide into wood chip stick making machine, rice hull stick making machine, sawdust stick making machine, and so on. This equipment is the main molding equipment for making machine-made charcoal. Raw Materials For Making Machine-made Charcoal It can extrude granular waste materials such as bamboo, wood, nutshells, straws, etc. with a moisture content of less than 12%, without any additive, through high temperature and high-pressure process, and extruded into a solid stick with a central hole. The basic principle is to use sawdust, crop stalks, chaff, shrub branches, bamboo frets, feed heads, bagasse, etc. as raw materials. After crushed through a wood chip crusher machine, high temperature and high-pressure zone is formed under the action of screw propeller and heating ring to process the loose raw materials into a hollow bar body. Features Of The Charcoal Briquette Machine 1. This machine has the characteristics of reasonable design, reliable manufacturing quality, convenient operation, small footprint, labor-saving, and power-saving. 2. The design of a fully automatic control electric heating device can randomly adjust the dry and humidity of the material, to ensure the stability of the material forming and improve the work efficiency. 3. The main parts of the product made of wear-resistant materials and specially treated, so they can continuously press for production and durable. 4. It is suitable for pressing and molding of various biomass raw materials and has low energy consumption and high production efficiency. Choosing A Suitable Charcoal Briquette Machine As an important component of the mechanism charcoal machine equipment, the charcoal briquette machine plays the role of molding machine-made charcoal in the overall equipment. When the charcoal making machine operation should be properly mastered according to the ratio of materials and the dry-wet conditions. Charcoal is an indispensable resource in the market.The charcoal briquette machine manufactured by Fusmar Machinery avoids the heavy smoke dust. And also improves the pollution problem in the production process, greatly improves the working environment of workers, reduces the waste of raw materials in production, and brings great profits to investors. Choosing a suitable charcoal briquette machine and using it properly will significantly improve the quality. It will soon reflect a benign effect in the production process. If you can further master the technology of making mechanism charcoal, you can also greatly reduce the cost of materials, thereby increasing profits. The above is the role of the charcoal briquette machine. Hope this article can help you to know more about this machine. If you want to build your own charcoal briquette production line, please contact us. 
How Can The Charcoal Briquette Machine Produce High-Quality Mechanism Charcoal02020-03-24 02:17:30
The charcoal briquette machine can produce high-quality charcoal, thus realizing economic benefits. Then, when we use the new charcoal machine to produce mechanism charcoal, we must not only have good equipment and operating techniques, but also select the appropriate raw materials and know its dry humidity. So, what requirements does the charcoal briquette machine on raw materials ? What Requirements Does The Charcoal Briquette Machine On Raw Materials There are many raw materials used in the production of machine-made charcoal, such as straw, wood chips, branches, peanut shells, furfural residue, wine lees, mushroom sticks, sludge, and a range of carbonaceous substances. Some crop burning materials can also be used as mechanism charcoal raw materials, energy conservation and environmental protection. Generally speaking, the production of mechanical charcoal with a charcoal briquette machine requires stricter raw materials, including two aspects: one is the length of the raw material, and the other is the dryness and wetness of the raw material.In order to grasp the length and humidity of the raw materials, a crusher machine and a dryer machine are used. The particle size of the raw charcoal is between 3-6mm, and the humidity is between 6% -12%. Only by mastering these two aspects can produce high-quality mechanism charcoal. How Can The Charcoal Briquette Machine Produce High-Quality Mechanism Charcoal 1. Only high-quality charcoal machine equipment can produce high-qualitycharcoal rods. The charcoal briquette machine equipment produced by Fusmar Machinery has reasonable design and can make high quality mechanism charcoal. 2. To produce high-quality mechanism charcoal, drying is very important. High-quality mechanism charcoal can be made if the humidity of the raw material guaranteed at 6-12%.If the humidity of the raw materials is high, and the charcoal is difficult to form. If the humidity is not enough, the charcoal will easily crack. Only by mastering the humidity of the raw materials can make high-quality charcoal. 3. The propeller in the charcoal making machine is also very important. If the angle of the end face of the propeller becomes smaller, or the contact surface becomes rough, the carbon rod cannot meet the requirements. 4. The temperature of the forming cylinder of the rod making machine should be 260 to 300℃. If the temperature is too high, the rod will be soft. If the temperature is low, the rod will be cracked. In order to produce high-quality charcoal rods, it is necessary to master the temperature of the forming cylinder. The charcoal machine equipment divided into four steps: crushing, drying, briquette making, and carbonization. The entire charcoal briquette production line equipment consists of crusher, dryer, charcoal briquette machine, and carbonization furnace. If you want to build your own charcoal briquette production line, please contact us.  
Rice Husk Can Be Used To Make Mechanism Charcoal With Charcoal Briquette Machine02020-04-17 00:23:52
As we all know, the raw materials for machine-made charcoal for barbecue are sawdust, branches, hardwood, bamboo chips, and so on. Of course, many people also hope to use wheat straw or corn stalks to make mechanism charcoal. Zhengzhou Fusmarcharcoal briquette machine manufacturer clearly tells you that there is no problem with straw in principle, but due to its low carbon content, large ash content, low-quality carbon, and poor market acceptance, it can be used for other purposes. What about rice husks? We all know that many rice husks have no place to place after harvesting. If it is used as mechanism charcoal, is it feasible? This is a good idea. In many years of practice, we know that it is completely feasible to use rice husk as charcoal. Because the shape and size of rice husks are suitable for forming, the crushing process can also be omitted. In other words, as long as the process of drying, molding, carbonization can become finished charcoal. In addition, rice husks can also be carbonized, and then formed using continuous charcoal making machine for rice husks. The carbonized carbon powder can be formed into different shapes, such as carbon blocks, carbon rods, balls, and tablets. Since carbonization is the key process of rice husk mechanism charcoal, rice husks can also be carbonized with rice husk retorting. Rice husk carbonization is different from the traditional charcoal firing method, which uses mechanical processing as the main method, so rice husk charcoal also called mechanism rice husk charcoal. Since the carbonization of rice husks expands the source of raw materials for the production of machine-made charcoal, some people call charcoal made from rice husks and wood by mechanical distillation as biomass charcoal, biochar for short. Let's talk about this key part of the carbonization furnace. Rice husk carbonization furnace adopts automatic control. The whole set of equipment is simple and labor-saving. In addition to the direct carbonization of rice husks, other biomass materials not exceeding 5 cm can also be directly carbonized. The principle is the same as the continuous carbonization device. Biomass materials that can also be carbonized include sawdust, peel, coffee shell, palm shell, pecan shell, bamboo flakes, hemp, coconut shell, bark, and so on. The carbonization process belongs to retorting carbonization, also called fluidized bed carbonization. The complete set of rice huskscharcoal briquette production line consists of dryer machine, charcoal briquette machine, carbonization furnace, etc.The equipment has scientific structure, reasonable design, continuous carbonization production, high efficiency, and the flue gas generated by carbonization can be recycled, reducing pollution, and providing new equipment for the comprehensive utilization of rice husks. 
Charcoal Briquette Machine Can Make Environmental Protection Mechanism Charcoal12020-07-19 12:04:46
Protecting environment is the responsibility of everyone. Nowadays, environmental protection is very important in various countries, and policies related to environmental protection are constantly being introduced. The burning of traditional charcoal is also a major factor causing environmental pollution. So now is the time to invest in charcoal briquette machine equipment, the use of wood chip charcoal determines its economic benefits. Environmental Protection Equipment Charcoal Briquette Machine The emergence of environmental protection equipment charcoal briquette machines reduced the environmental pollution and avoided the waste of forest resources. Environmentally friendly charcoal briquette production line equipped with purification equipment, which can not only remove excess dust but also make full use of dust recycling, to achieve the effect of energy-saving and environmental protection. Zhengzhou Fusmarmechanism charcoal machineavoids the situation of heavy smoke and dust, and also improves the pollution problem in the production process. It greatly improves the working environment of workers, reduces the waste of raw materials in its production, and brings great benefits to investors’ profit. Charcoal Briquette machine Towards Clean Direction With the development of society and the continuous progress of science and technology, the environmental pollution we rely on is becoming more and more serious. The emergence of the charcoal making machine alleviates the current situation where environmental problems are too tense. The more extensive selection of raw materials The production of raw materials is diverse, branches, straw, peanut shell, trunk, cotton straw, tea seed shell, fruit shell, weeds, leaves, and so on can use as raw materials, can turn waste into treasure. Good cleanliness Environmental protection charcoal making machine without probe, no spark when burning, and small ash content. High energy The calorific value of mechanical charcoal is 1000-1500kcal/kg higher than that of traditional charcoal. Low water content After a series of treatments with the original production of charcoal water content is lower. Charcoal Briquette Machine Industry Can Bring High Profits Charcoal briquette machine’s raw materials can target almost all plant raw materials, if the source is sufficient, can put into production in large quantities. At present, the charcoal market is not to worry about from the market demand, some charcoal manufacturers appeared in short supply, even some users is not enough to buy equipment, has established the direction of sales. Now the market development of the charcoal making machine is very broad,so the investment can bring benefits in the charcoal machine, also to meet the market demand.  Charcoal briquette machine is an important machinery for the complete charcoal briquette production line. In production, it can effectively use agricultural and forestry wastes to produce mechanism charcoal and achieve energy-saving and environmentally friendly production.  
Using A Charcoal Briquette Machine To Make Smokeless Clean Mechanism Charcoal02020-05-25 00:10:03
Machine-made charcoal also called smokeless clean charcoal, it is a kind of carbonaceous stick made of wood chippings extruded through a charcoal briquette making machine. The raw materials of charcoal sticks come from a wide range of sources, like rice husks, peanut shells, cotton shells, corn cobs, corn stalks, and sorghum stalks can all be used as raw materials to produce charcoal sticks. Sawdust, shavings, and bamboo chips as raw materials are the best. Machine-made charcoal has high density, high calorific value, smokeless, tasteless, pollution-free, non-explosive, and inflammable.   The Production Of Smokeless Clean Charcoal Wood shavings (sawdust), tree branches, rice husks, bamboo shavings, peanut skins, sunflower seed shells, furfural residues, wine residues, bagasse, corn cobs, coconut shells, coffee shells, and crop straws are used as raw materials.After the dryer drying into the appropriate humidity standard raw materials, then into the charcoal briquette making machine, after the high temperature and high-pressure molding into sticks (semi-finished products). Finally, through the carbonization furnace (carbonization furnace forms a variety of, generally is brick kiln) carbonization into finished mechanism charcoal. Mechanism Charcoal And Other Charcoal Difference 1. Environmental protection.Do not cut down trees, using bamboo products waste production, turn waste into treasure.The production of ordinary charcoal to cut down trees, destroy the ecological environment. 2. High energy.The fixed carbon content is about 80% with a calorific value of 7500-8000kcal/kg, while the fixed ordinary charcoal content is low with a calorific value of 6500kcal/kg. 3. Cleanliness.Smokeless no charcoal head, combustion no spark. During the combustion, the residual ash naturally falls down and does not float up. Ash content 3% or 6% after combustion residual ashless, flammable. 4. Shape rules, reasonable structure, easy to use.Uniform length, size, hollow or solid construction, suitable for combustion and use. 5. Water content is low, within 5%.Ordinary charcoal has large water content. 6. The product contains no chemical substances, no toxic odor, no pollution, long burning time, and other advantages. Classification Of Mechanism Charcoal Low-temperature Charcoal Low-temperature charcoal is loose in texture, low in carbon content and poor in mechanical strength. It is used in industry and agriculture (such as silicon smelting plant), heating, and hot pot. Medium-temperature Charcoal The texture of medium-temperature charcoal is closer than that of low-temperature charcoal, and the carbon content is slightly higher than that of low-temperature charcoal.It is mainly used for barbecue, in addition to, industrial and agricultural, heating, and hot pot. High-temperature Charcoal High-temperature high-quality charcoal is hard and solid, heavy to handle in hand. It can sink in water, can make steel sound when struck, has high carbon content, low volatile content and ash content, no flame when burning. The burn resistance is three times that of low-temperature charcoal and two times that of medium-temperature charcoal. It is suitable for all occasions with charcoal, especially for high-grade barbecue and export. Market Prospect The mechanism charcoal market is broad. Catering (barbecue, hot pot, etc.) is used as charcoal for the barbecue. The mechanism charcoal density is more than three times that of ordinary charcoal, burning smokeless. Industrially, mechanical charcoal is used in the production of carbon disulfide and steel smelting. It is also used as a supplementary fuel for boilers. Its density is similar to that of coal, with a calorific value of 5,500-7,000 kcal /KG, but its ash content is significantly lower than that of coal. The use of mechanism charcoalis broad, and the raw materials are relatively wide. The market sales are also dominated by large cities, and the demand is quite large. The investment threshold of mechanism charcoal is low, but the technical requirements are relatively high. In the initial stage of production, if the technical level does not meet the requirements, the loss is also possible. Hope this article can help you to know more about mechanism charcoal with the charcoal briquette machine. If you want to build a charcoal briquette plant, please contact us. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions