Sewing machine automatically adjust the cutting line

Answers:1   |   LastUpdateAt:2012-02-03 06:58:07  

Question
Marcia
Asked at 2012-02-03 06:55:41
Sewing machine automatically adjust the cutting line
Answer1eweAnswered at 2012-02-03 06:58:07
Turn the cam adjustment of the pulley of the cut, when the needle bar up to 5 mm or less in the lowest position , the solenoid of the hand clippers online, so that the roller of the cam and the line in contact with the Ministry of the gap, and then cut the cam as a temporary fixation . Finally , return to the original cut line solenoid position , adjust the front of the cam face of the cam and the gap between the roller of 0.6 - 0.8mm . Dynamic adjustment of the cutting knife fixed line when a cam to the cut line at the end of the cam, the knife and fixed knife edge of the front must be committed to the Department about 0.2 - 0.5mm . If you move the poles to cut the commitment , the roller cam to the highest point when cutting the front of the knife blade fixed to the blade dynamic mesh , then tighten the screws.
Related Questions
1
  • Answer This Question:Sewing machine automatically adjust the cutting line