Biomass Pellet Production Line Supplier related questions

Answers
Asked by
Updated
Biomass Wood Pellets Biomass Pellet Production Line Supplier02019-06-28 18:14:29
Fusmar Machinery is a professional biomass pellet production line supplier, this article we will introduce biomass pellet production line in detail. Biomass fuel pellets produced by this production line are environmentally friendly and energy-saving, and are also a renewable resource. Compared with natural coal biomass pellet resources, it has been highly recognized and influenced by the market and consumers. Biomass Pellet Production Line Introduction With the continuous improvement of living standards, people's consumption awareness is also gradually diversified. On the premise of advocating resource conservation and energy conservation, environmental protection, conservation and renewable resources have also become a topic of concern to everyone of us. Therefore, the biomass renewable resource utilization market has also become a big market. At the same time, biomass pellet production line uses biomass energy to process biomass wood pellets fuel, environmental protection and energy saving equipment and other machinery is also constantly appearing, which is warmly welcomed by investors. So, the biomass energy and resource market has a broad development prospect and great potential. Therefore, as biomass energy resources, should seize this rare opportunity to make a big display in the market. Concept Of Biomass Biomass refers to the use of atmosphere, water, land and other organisms produced by photosynthesis, that is, all living organic matter can grow is generally called biomass. Characteristics: renewable, low pollution, widespread distribution. Biomass includes plants, animals and microorganisms. Broad concept: biomass includes all plants, microorganisms and animals that eat plants and microorganisms as well as their waste products. Representative biomass such as crops, crop waste, wood, wood waste and animal waste. Narrow sense: biomass mainly refers to the substances such as straws, trees and other lignocellulose (lignin for short), wastes of agricultural products processing industry, agricultural and forestry wastes and livestock manure and wastes in the production of animal husbandry in the process of agricultural and forestry production, except for grains and fruits. Uses Of Biomass Fuel Pellet fuel is a new type of bio-energy, which can replace wood, fuel oil, liquefied gas, etc. It is widely used in heating, domestic cooking range, hot water boiler, industrial boiler, biomass power plant, etc. Process Flow Of Biomass Pellet Production Line Biomass fuel production line equipment mainly includes biomass pellet hammer mill , classification screen, dryer, wood pellet making machine, cooling machine, packing machine and process matching dust removal, water feeding equipment. The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. 1. Sieve. Screen large materials and impurities to ensure that raw materials meet pelletization requirements. Usually between 2 and 6mm. 2. Drying. Biomass fuel pelletization requirements of water under 20%, drying with the drum dryer. 3. Pelletization. The key step, completed by biomass pellet machine, pellet quality, stable yield and high yield. 4. Cool down. Due to the extrusion work, biomass pellet temperature is higher, need to be cooled after packaging. Counterflow type cooling machine, reasonable design, fast cooling. 5. Sieve. Through the vibration grading sieve, the qualified biomass pellets are screened out, and other unqualified products are recycled and reused. 6. Packaging. Automatic measurement, automatic sealing, save time and labor, improve efficiency, reduce cost. Dust removal equipment will recycle the dust generated in the production process for pelleting, reducing waste and improving revenue. Biomass Pellet Production Line Product Advantages 1. Adopt the principle of die roll extrusion molding to process biomass materials such as agricultural and forestry residues into solid molding fuel, so as to achieve continuous and stable industrial production. 2. The whole biomass pellet fuel production line is characterized by low power consumption, clean environmental protection, low consumption and high efficiency, high molding rate and high molding quality. 3. Stable operation of equipment, lower power consumption, continuous operation without deformation, and strong output.
Biomass Pellet Production Line Supplier02019-06-30 18:21:03
Fusmar Machinery is a professional biomass pellet production line supplier, this article we will introduce biomass pellet production line in detail. Biomass fuel pellets produced by this production line are environmentally friendly and energy-saving, and are also a renewable resource. Compared with natural coal biomass pellet resources, it has been highly recognized and influenced by the market and consumers. Biomass Pellet Production Line Introduction With the continuous improvement of living standards, people's consumption awareness is also gradually diversified. On the premise of advocating resource conservation and energy conservation, environmental protection, conservation and renewable resources have also become a topic of concern to everyone of us. Therefore, the biomass renewable resource utilization market has also become a big market. At the same time, biomass pellet production line uses biomass energy to process biomass wood pellets fuel, environmental protection and energy saving equipment and other machinery is also constantly appearing, which is warmly welcomed by investors. So, the biomass energy and resource market has a broad development prospect and great potential.Therefore, as biomass energy resources, should seize this rare opportunity to make a big display in the market. Concept Of Biomass Biomass refers to the use of atmosphere, water, land and other organisms produced by photosynthesis, that is, all living organic matter can grow is generally called biomass.Characteristics: renewable, lowpollution,widespread distribution.Biomass includes plants, animals and microorganisms. Broad concept: biomass includes all plants, microorganisms and animals that eat plants and microorganisms as well as their waste products.Representative biomass such as crops, crop waste, wood, wood waste and animal waste.Narrow sense: biomass mainly refers to the substances such as straws, trees and other lignocellulose (lignin for short), wastes of agricultural products processing industry, agricultural and forestry wastes and livestock manure and wastes in the production of animal husbandry in the process of agricultural and forestry production, except for grains and fruits. Uses Of Biomass Fuel Pellet fuel is a new type of bio-energy, which can replace wood, fuel oil, liquefied gas, etc. It is widely used in heating, domestic cooking range, hot water boiler, industrial boiler, biomass power plant, etc. Process Flow Of Biomass Pellet Production Line Biomass fuel production line equipment mainly includes biomass pellet hammer mill, classification screen, dryer, wood pellet making machine, cooling machine, packing machine and process matching dust removal, water feeding equipment.The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. 1. Sieve.Screen large materials and impurities to ensure that raw materials meet pelletization requirements.Usually between 2 and 6mm. 2. Drying.Biomass fuel pelletization requirements of water under 20%, drying with the drum dryer. 3. Pelletization.The key step, completed by biomass pellet machine, pellet quality, stable yield and high yield. 4. Cool down.Due to the extrusionwork,biomass pellet temperature is higher, need to be cooled after packaging.Counterflow type cooling machine, reasonable design, fast cooling. 5.Sieve.Through the vibration grading sieve, the qualified biomass pellets are screened out, and other unqualified products are recycled and reused. 6. Packaging.Automatic measurement, automatic sealing, save time and labor, improve efficiency, reduce cost. Dust removal equipment will recycle the dust generated in the production process for pelleting, reducing waste and improving revenue. Biomass Pellet Production Line Product Advantages 1. Adopt the principle of die roll extrusion molding to process biomass materials such as agricultural and forestry residues into solid molding fuel, so as to achieve continuous and stable industrial production. 2.The whole biomass pellet fuel production line is characterized by low power consumption, clean environmental protection, low consumption and high efficiency, high molding rate and high molding quality. 3. Stable operation of equipment, lower power consumption, continuous operation without deformation, and strong output. 
Development Prospect Of Biomass Pellet Fuel Biomass Pellet Machine Supplier12019-09-29 20:42:26
The biomass pellet fuel is mainly used agricultural and forestry waste as raw materials, through crushing, mixing, extrusion, drying, and other processes, into a variety of molding (such as block, pellet, etc.), can directly burn, is a new clean fuel. Compared with liquid oil fuel, biomass pellet fuel is easy to carry and safe. Therefore, it is necessary to develop a biomass pellet fuel with a high combustion rate and high heat yield. Zhengzhou Fusmar Machinery is a professional biomass pellet machine supplier, this article we will introduce biomass pellet fuel in detail. Biomass Pellet Fuel Preparation Method And Process Flow The biomass pellet production line equipment mainly includes crusher, grading screen, dryer, biomass pellet machine, cooling machine, packing machine and process matching dust removal, water feeding equipment.The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding, and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. Zhengzhou Fusmar Machinery according to the market demand,targeted development of biomass pellet fuel production line equipment, applicable to the wood chips, sawdust, bamboo shavings, wood shavings, barley straw, oat straw, wheat straw, rye, straw, rice straw, sorghum straw, corn stalks, stem drying potato vines, beans, peanut vine drying pelletization moisture 35-65% materials such as molding. According to the characteristics of each biomass material, yield size, application requirements, cost control, automation, field conditions, etc. to optimize the drying molding technology.Based on the principle of die roll extrusion molding, biomass materials such as agricultural and forestry residues are processed into solid molding fuel to achieve continuous and stable industrial production. Development Prospect Of Biomass Pellet Fuel 1. The biomass pellet fuel, as a renewable energy source, can not only supplement the shortage of conventional energy but also have significant environmental benefits.Compared with other biomass energy technologies, it is easier to achieve large-scale production and use.At present, biomass pellet fuel has entered the stage of industrial production and application. It is a good project with low-risk investments. The investment scale can be large or small. 2. Raw materials are available locally. Investors can produce qualified products as long as they follow the operating procedures. 3. Most agricultural and forestry waste resources, such as rice and corn straws, are reduced to waste with a low utilization rate, which adds a burden to the environment.Therefore, the utilization of these wastes in the production and development of biomass pellet fuels is very promising, which can not only solve the persistent environmental problems but also bring considerable economic benefits. 4. At present, the natural environment is bad, countries are striving to develop the environmental protection industry, as a clean energy biomass pellet fuel will replace a variety of living fuelsin the future, its development prospects must be broad. Market Prospects For Biomass Pellet Fuels 1. The energy problem is one of the factors affecting social and economic development. Solving the energy problem will solve the power problem of economic development.Biomass pellet fuel can replace coal, oil, natural gas, and other non-renewable resources, and effectively reduce environmental pollution.Using biomass pellet machine to produce biomass fuel pellet has good economic and social benefits. 2. rops, wood materials as raw materials to produce biomass pellet fuel is pollution-free, renewable quality energy, the future is boundless.Because the shape is granular, the volume is compressed, storage space is saved, and transportation is convenient, reducing transportation cost. 3. Biomass pellet fuel combustion efficiency, easy to burn out, the amount of carbon residue is small.Compared with coal, volatile content is high, low ignition point, easy to ignite.Increased density, high energy density, combustion duration increased significantly, can be directly used in coal-fired boilers.In addition, when biomass pellets are burned, the content of harmful gas is very low, and the emission of harmful gas is less, which has environmental protection benefits.And the ash after combustion can also be used directly as potash fertilizer, saving costs. In order to meet the various needs of customers, Zhengzhou Fusmar Machinery not only provides the complete set of biomass pellet production line but also provides a single machine.As a renewable energy biomass pellet fuel development prospects are broad, the market prospects are bright, with good economic and social benefits. 
500kg/H Wood Pellet Production Line Supplier02019-06-26 18:07:26
Small Wood Pellet Production Line  Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine . Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying,pelletizing,conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  
3-5T/H Animal Feed Pellet Production Line Supplier12019-07-10 00:09:33
Industry Animal Feed Pellet Plant 3-5T/H feed pellet plant is very suitable for a industrial feed pellet manfuacturer. This plant is equipped with the ring die SZLH350 ring die feed pellet machine.The maximum capacity of the SZLH350 is 8T/H. This production line can process materials of corn,soybean, wheat and other cereals into pellets for chicken and cow.  3-5T Animal Feed Pellet Plant Features 1. The feed pellet production line  has a small footprint and a high degree of automation. 2. It produces smooth and hard particles suitable for a variety of animals. 3. The pellets are very nutritious and can meet the growth needs of animals. 4. This production line is widely used in medium and large feed plants. 5. The raw materials may be various cereals such as corn, barley, wheat and soybeans, and crude fibers such as cotton stalks, corn fiber, grass and the like. 3-5T Animal Feed Pellet Plant Flow Chart 1. Raw material receiving and cleaning process This process is used to clean and organize large pieces such as corn stover, stones, rope heads, branches, corn cobs and mud, small pieces such as sand and withered grains. When the raw material is a powder, a tapered powder sieve is used to clean the debris in the powder. 2. Crushing process - hammer mill We crush the raw material into a powder using a hammer mill.The material should be crushed into suitable pellets before the pelletizing process.  3. Pellet cooling process The new finished feed pellets are of high temperature,it will become moist if pack them directly into the packing bag.So they need cooling to the room temperature, the pellets can store long time before after cooling.  4. Screening process This process mainly use the vibrating screen and full ring rotating screen, the qualified pellets will be delivered to the next process.  5. Packing Process This process is to pack the pellets into different bags, the packing bag size is from 10-50KG. 
Small Fish Feed Pellet Production Line Supplier12019-07-10 00:05:00
Small Fish Feed Pellet Plant This small fish feed pellet production line  production line can produce the feed pellets for frewarter fish,marine fish. It can also produce floating fish feed pelles and the submerged fish feed. Small Fish Feed Pellet Production Line Applications 1. This small fish feed pellet production line production line can produce the feed pellets for frewarter fish,marine fish. It can also produce floating fish feed pelles and the submerged fish feed.  Material Of Small Fish Feed Pellet Production Line There are 4 kinds of materials for the fish feed pellet, they are: 1.1Protein Material Cardamom om,cotton kernel,rapeseed meal,fish meal, blood bone meal. 1.2Energy material Maize, porcelain powder, 1.3 Oil raw material Fish oil, soybean oil, rapeseed oil. 1.4Premix Material Some mineral,vitamin 2. Process Of Small Fish Feed Pellet Production Line Material Crushing→Mixing→Conveying→Fish Feed Pellet Machine →Drying→Cooling→Blending 3.1 Material Crushing The fish feed pelletizing require the raw material size less than 6mm, so protein or energy material need crushing before the pelletizing process. Below is the crusher in this small fish feed pellet line.  3.2Material Mixing In order to ensure the pellets has uniform nutrition, it need to mix all the raw materials before the extrauding process. The Screw conveyor  connects crusher and mixer. This is process is very important to the finished pellet quality. 3.Pellet Extrauding 4.  Working Principle The extruder has a pair of screws and sleeves that have the function of mixing and twisting. After the raw material enters the expansion chamber, the material is squeezed, rubbed, sheared, etc. between the screw sleeves, and the internal pressure is continuously increased, up to 4Mpa, and the temperature is continuously rising, up to 140 degrees Celsius. During the period of 3-7s, the temperature and pressure increase sharply, and the structure of the material changes, which further gelatinizes the starch, denatures the protein, destroys the crude fiber, and kills harmful bacteria such as Salmonella. The high temperature and high pressure materials come out from the discharge port, and the pressure is suddenly released in an instant, and the water is partially flashed. After cooling, the material is loose and porous, and the expanded material is in the form of agglomerates, flocs or coarse chips. 
Biomass Pellet Machine The Process Flow Of Pine Biomass Pellet Fuel02019-11-01 01:06:19
The raw material of biomass pellet fuel is quite extensive. It can be produced by crop straw, forestry processed scrap, even livestock manure, municipal waste, and so on. Biomass pellet fuel is different from traditional fuels such as coal and petroleum. Fuel is a new type of energy, renewable energy, and reused energy. Biomass pellet fuel raw materials can be seen everywhere, through mechanical pulverization (hammer mill), drying, extrusion, granulation (biomass pellet machine) and other processes, and then finally finished into pellets. Since the raw materials are organic waste, the biomass fuel pellets are clean energy that easy to burn and has less smoke. Many users have a certain understanding of the process flow of pine wood pellet fuel, but the specific details of production may not be very clear. This article will introduce the pine wood pellet production line process in detail. The Crushing Of Raw Materials Raw materials before processing are relatively long or relatively large. If the raw material crushed, the length of straw should be controlled at about 5cm, so as to avoid excessive raw materials entering the biomass pellet machine and causing the block machine. The Drying Of Raw Materials Since the raw material is relatively large in water recovery. If the user of the large biomass pellet machine can dry the raw material, the small processing needs to be air-dried, and the moisture of the raw material is generally controlled between 15% and 25%. Excessive moisture can easily block the ring die of the biomass pellet machine. Raw Material Compression Pelletization The raw material has a moderate moisture content after being dried and can be molded without pressing any additives when the particulate fuel is pressed by the wood pellet machine. It can produce a smooth and lustrous granular fuel. Cooling Of Pine Pellet Fuel The produced pine pellet fuel has a relatively high temperature and needs to be cooled through the cooling machine before being packaged. If the temperature is too high, the packaging is easy to produce water droplets to loosen the particles. Which is not conducive to sales. The Packaging Of Pine Pellet Fuel Pine pellet fuel can be packaged in a quantitative packaging machine. It can be packaged into 5kg, 10kg, 25kg, and so on, which is convenient for small users to use. It can also be made into tons of bags, which is convenient for large users to use and unload. If you are interested in our biomass pellet making machine, welcome to our website wood pellet machine. 
Biomass Pellet Machine The Process Flow Of Pine Biomass Pellet Fuel02019-10-21 00:21:42
The raw material of biomass pellet fuel is quite extensive. It can be produced by crop straw, forestry processed scrap, even livestock manure, municipal waste, and so on. Biomass pellet fuel is different from traditional fuels such as coal and petroleum. Fuel is a new type of energy, renewable energy, and reused energy. Biomass pellet fuel raw materials can be seen everywhere, through mechanical pulverization (hammer mill), drying, extrusion, granulation (biomass pellet machine) and other processes, and then finally finished into pellets. Since the raw materials are organic waste, the biomass fuel pellets are clean energy that easy to burn and has less smoke. Many users have a certain understanding of the process flow of pine wood pellet fuel, but the specific details of production may not be very clear. This article will introduce the pine wood pellet production line process in detail. The Crushing Of Raw Materials Raw materials before processing are relatively long or relatively large. If the raw material crushed, the length of straw should be controlled at about 5cm, so as to avoid excessive raw materials entering the biomass pellet machine and causing the block machine. The Drying Of Raw Materials Since the raw material is relatively large in water recovery. If the user of the large biomass pellet machine can dry the raw material, the small processing needs to be air-dried, and the moisture of the raw material is generally controlled between 15% and 25%. Excessive moisture can easily block the ring die of the biomass pellet machine. Raw Material Compression Pelletization The raw material has a moderate moisture content after being dried and can be molded without pressing any additives when the particulate fuel is pressed by the wood pellet machine. It can produce a smooth and lustrous granular fuel. Cooling Of Pine Pellet Fuel The produced pine pellet fuel has a relatively high temperature and needs to be cooled through the cooling machine before being packaged. If the temperature is too high, the packaging is easy to produce water droplets to loosen the particles. Which is not conducive to sales. The Packaging Of Pine Pellet Fuel Pine pellet fuel can be packaged in a quantitative packaging machine. It can be packaged into 5kg, 10kg, 25kg, and so on, which is convenient for small users to use. It can also be made into tons of bags, which is convenient for large users to use and unload. If you are interested in our biomass pellet making machine, welcome to our website wood pellet machine. 
Biomass Pellet Machine The Process Flow Of Pine Biomass Pellet Fuel02019-10-21 00:24:54
The raw material of biomass pellet fuel is quite extensive. It can be produced by crop straw, forestry processed scrap, even livestock manure, municipal waste, and so on. Biomass pellet fuel is different from traditional fuels such as coal and petroleum. Fuel is a new type of energy, renewable energy, and reused energy. Biomass pellet fuel raw materials can be seen everywhere, through mechanical pulverization (hammer mill), drying, extrusion, granulation (biomass pellet machine) and other processes, and then finally finished into pellets. Since the raw materials are organic waste, the biomass fuel pellets are clean energy that easy to burn and has less smoke. Many users have a certain understanding of the process flow of pine wood pellet fuel, but the specific details of production may not be very clear. This article will introduce the pine wood pellet production line process in detail. The Crushing Of Raw Materials Raw materials before processing are relatively long or relatively large. If the raw material crushed, the length of straw should be controlled at about 5cm, so as to avoid excessive raw materials entering the biomass pellet machine and causing the block machine. The Drying Of Raw Materials Since the raw material is relatively large in water recovery. If the user of the large biomass pellet machine can dry the raw material, the small processing needs to be air-dried, and the moisture of the raw material is generally controlled between 15% and 25%. Excessive moisture can easily block the ring die of the biomass pellet machine. Raw Material Compression Pelletization The raw material has a moderate moisture content after being dried and can be molded without pressing any additives when the particulate fuel is pressed by the wood pellet machine. It can produce a smooth and lustrous granular fuel. Cooling Of Pine Pellet Fuel The produced pine pellet fuel has a relatively high temperature and needs to be cooled through the cooling machine before being packaged. If the temperature is too high, the packaging is easy to produce water droplets to loosen the particles. Which is not conducive to sales. The Packaging Of Pine Pellet Fuel Pine pellet fuel can be packaged in a quantitative packaging machine. It can be packaged into 5kg, 10kg, 25kg, and so on, which is convenient for small users to use. It can also be made into tons of bags, which is convenient for large users to use and unload. If you are interested in our biomass pellet making machine, welcome to our website wood pellet machine. 
500kg/H Wood Pellet Production Line0amyyan1234562019-06-09 18:40:55
Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying, pelletizing, conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. The feed pellet materials are maize, rice tips, sorghum, wheat, bran of rice wheat and maize.  Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine  is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  https://youtu.be/aR8RW3McutA
Industry Wood Pellet Production Line0amyyan1234562019-06-05 21:01:02
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line  is designed for industrial production and can produce biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm), sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from wood logs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine. And ring die wood pellet machine  is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it needs the cooler to lower the temperature and the moisture. After this process, the pellets will be suitable for longtime storing. Usually the industry pellet production line will use the countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation. 
Industry Wood Pellet Production Line0amyyan1234562019-06-04 23:30:04
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line is designed for industrial production and can produce  biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per  hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating  purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. Industry Wood Pellet Production Line Flowchart A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm),  sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust  pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from woodlogs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush  the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the  sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is  less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that  capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable  performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine. And Ring  die wood pellet machine is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it  needs the cooler to lower the temperature and the moisture. After this process, the pellets will be  suitable for longtime storing. Usually the industry pellet production line will use the  countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and  packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation.  

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions