How Does A Wood Pellet Production Line Work? related questions

Answers
Asked by
Updated
How Does A Wood Pellet Production Line Work?12019-07-10 00:07:41
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line  is designed for industrial production and can produce biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm), sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from woodlogs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine . And ring die wood pellet machine  is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it needs the cooler to lower the temperature and the moisture. After this process, the pellets will be suitable for longtime storing. Usually the industry pellet production line will use the countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation. 
Industry Wood Pellet Production Line0amyyan1234562019-06-04 23:30:04
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line is designed for industrial production and can produce  biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per  hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating  purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. Industry Wood Pellet Production Line Flowchart A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm),  sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust  pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from woodlogs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush  the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the  sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is  less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that  capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable  performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine. And Ring  die wood pellet machine is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it  needs the cooler to lower the temperature and the moisture. After this process, the pellets will be  suitable for longtime storing. Usually the industry pellet production line will use the  countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and  packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation.  
Industry Wood Pellet Production Line0amyyan1234562019-06-05 21:01:02
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line  is designed for industrial production and can produce biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm), sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from wood logs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine. And ring die wood pellet machine  is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it needs the cooler to lower the temperature and the moisture. After this process, the pellets will be suitable for longtime storing. Usually the industry pellet production line will use the countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation. 
Small Wood Pellet Production Line1amyyan1234562019-07-10 00:04:58
Small Wood Pellet Production Line  Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying,pelletizing,conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  
500kg/H Wood Pellet Production Line0amyyan1234562019-06-09 18:40:55
Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying, pelletizing, conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. The feed pellet materials are maize, rice tips, sorghum, wheat, bran of rice wheat and maize.  Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine  is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  https://youtu.be/aR8RW3McutA
500kg/H Wood Pellet Production Line Supplier02019-06-26 18:07:26
Small Wood Pellet Production Line  Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine . Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying,pelletizing,conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  
Biomass Wood Pellets Biomass Pellet Production Line Supplier02019-06-28 18:14:29
Fusmar Machinery is a professional biomass pellet production line supplier, this article we will introduce biomass pellet production line in detail. Biomass fuel pellets produced by this production line are environmentally friendly and energy-saving, and are also a renewable resource. Compared with natural coal biomass pellet resources, it has been highly recognized and influenced by the market and consumers. Biomass Pellet Production Line Introduction With the continuous improvement of living standards, people's consumption awareness is also gradually diversified. On the premise of advocating resource conservation and energy conservation, environmental protection, conservation and renewable resources have also become a topic of concern to everyone of us. Therefore, the biomass renewable resource utilization market has also become a big market. At the same time, biomass pellet production line uses biomass energy to process biomass wood pellets fuel, environmental protection and energy saving equipment and other machinery is also constantly appearing, which is warmly welcomed by investors. So, the biomass energy and resource market has a broad development prospect and great potential. Therefore, as biomass energy resources, should seize this rare opportunity to make a big display in the market. Concept Of Biomass Biomass refers to the use of atmosphere, water, land and other organisms produced by photosynthesis, that is, all living organic matter can grow is generally called biomass. Characteristics: renewable, low pollution, widespread distribution. Biomass includes plants, animals and microorganisms. Broad concept: biomass includes all plants, microorganisms and animals that eat plants and microorganisms as well as their waste products. Representative biomass such as crops, crop waste, wood, wood waste and animal waste. Narrow sense: biomass mainly refers to the substances such as straws, trees and other lignocellulose (lignin for short), wastes of agricultural products processing industry, agricultural and forestry wastes and livestock manure and wastes in the production of animal husbandry in the process of agricultural and forestry production, except for grains and fruits. Uses Of Biomass Fuel Pellet fuel is a new type of bio-energy, which can replace wood, fuel oil, liquefied gas, etc. It is widely used in heating, domestic cooking range, hot water boiler, industrial boiler, biomass power plant, etc. Process Flow Of Biomass Pellet Production Line Biomass fuel production line equipment mainly includes biomass pellet hammer mill , classification screen, dryer, wood pellet making machine, cooling machine, packing machine and process matching dust removal, water feeding equipment. The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. 1. Sieve. Screen large materials and impurities to ensure that raw materials meet pelletization requirements. Usually between 2 and 6mm. 2. Drying. Biomass fuel pelletization requirements of water under 20%, drying with the drum dryer. 3. Pelletization. The key step, completed by biomass pellet machine, pellet quality, stable yield and high yield. 4. Cool down. Due to the extrusion work, biomass pellet temperature is higher, need to be cooled after packaging. Counterflow type cooling machine, reasonable design, fast cooling. 5. Sieve. Through the vibration grading sieve, the qualified biomass pellets are screened out, and other unqualified products are recycled and reused. 6. Packaging. Automatic measurement, automatic sealing, save time and labor, improve efficiency, reduce cost. Dust removal equipment will recycle the dust generated in the production process for pelleting, reducing waste and improving revenue. Biomass Pellet Production Line Product Advantages 1. Adopt the principle of die roll extrusion molding to process biomass materials such as agricultural and forestry residues into solid molding fuel, so as to achieve continuous and stable industrial production. 2. The whole biomass pellet fuel production line is characterized by low power consumption, clean environmental protection, low consumption and high efficiency, high molding rate and high molding quality. 3. Stable operation of equipment, lower power consumption, continuous operation without deformation, and strong output.
How To Improve The Production Efficiency Of Biomass Pellet Fuels Wood Pellet Machine02019-12-08 23:20:29
The wood pellet machine adopts the screw center pressure regulating the mechanism, and the gap of the mold can adjust suitable for different materials, and ensure the pressing effect. The biomass pellet machine pressure roller adopts a large groove width, is pressure-resistant and wear-resistant. Zhengzhou Fusmar Machinery is a professional wood pellet machine manufacturer, this article will introduce how to improve the production efficiency of wood pellet machine in detail. Wood Pellet Machine Operation Skills The wood pellet machine has become a very hot environmental protection equipment in recent years, but for the novice operator, there will always be such problems due to improper operation. If these problems are not handled well, it will directly affect the output of the equipment. Zhengzhou Fusmar Machinery has accumulated rich experience in the production and sales of pellet machine for many years and summarized some tips for everyone. 1. Select equipment suitable for the production capacity of thewood pellet production line, such as the actual output of 1-2 tons. If the machine is 2-3 tons, it will be overused and wasteful. 2. The feeding should be uniform during the production process, so as to ensure the smooth operation of the wood pellet machine, and the granulation is uniform and does not block the material. 3. Control the gap between the mold and the pressure roller. After the high temperature is matured, the material is pressed  by the pressing wheel, so that the pellets have good compactness and firm appearance. 4. Select the appropriate mold aperture according to your actual needs. If the aperture is too small, it will result in low output and no discharge, which will seriously affect the production efficiency of the wood pellet machine. 5. Regular oil lubrication and cleaning. Long-term friction between the mold and the press wheel can damage the mold. Regular oiling and cleaning can not only ensure the cleanliness of the mold but also reduce the friction, reduce the cost and provide production efficiency. How To Maximize The Production Capacity Of Wood Pellet Machine Maximize the production capacity of wood pellet machine mainly includes these aspects: Strict control of the nature of the feed 1. It is forbidden to enter the hard material, and it is forbidden to enter the granulation room in the production. 2. Control the pellet size composition of the material, prohibit the entry of materials with too large pellet size, should screen in advance. 3. Control the moisture content of the material, and dry the material with a large amount of water to prevent the material from adhering to the inner wall of the granulation chamber. Improve the rolling form. The rolling form of the pressure roller determines the important factors of various indexes such as production efficiency, power consumption, mold wear, and good forming. By improving the design of the rolling form of the wood chip granule pressure roller, the measures of increasing the pressure, reducing the ineffective wear and reducing the force of the pressure wheel make the material easy to form a more effective pressing zone in the granulating chamber, and the pressure of the single die hole is larger, which is beneficial to the laminating of the material and improves the material. The discharge rate of the material can achieve the purpose of improving the production efficiency of the equipment. Reasonable working parameters. The working parameters of the biomass pellet machine have a direct influence on the movement characteristics of the material, which in turn has an important impact on the production efficiency of the equipment. Therefore, it is necessary to ensure that the working parameters of the equipment are reasonable in production. In order to improve the production efficiency of the equipment, the wood chip granule pressure roller and the mold design are generally improved, and according to the improved pressure roller and the mold, the working parameters are matched, so that the mold and the material are matched to make the equipment production efficiency maximize. Improve equipment transmission efficiency. The transmission efficiency of the speed reduction mechanism affects the production efficiency of the wood pellet machine. When the transmission efficiency reduced, the actual power consumption of the equipment will reduce. The wood pellet machine drive system can improve the efficiency of the transmission system to increase the actual useful power of the wood chip machine, to achieve energy saving. Choosing a suitable wood pellet machine and using it properly will significantly improve the quality of the wood pellets. It will soon reflect a benign effect in the production process. If you can further master the technology of making wood pellets, you can also greatly reduce the cost of materials, thereby increasing profits. 
Production Advantages Of Wood Pellet Machine For Biomass Industry02020-05-09 02:12:09
The wood pellet machine is to make the crushed material of wood chips, branches, straw, grass, rice husks, etc. into granular fuel products. Because different industries have different requirements for fuel density. Therefore, after extrusion processing with wood pellet machine, the fuel value contained in different raw materials is different. Corn stalks processed with straw pellet machine and the combustion value is about 3800 kcal. The fuel combustion value of rice husks and peanut husks is slightly higher, but there will be differences according to different regions.   Production Advantages Of Wood Pellet Machine For Biomass Industry 1. Higher production efficiency, increase industry capacity. The industry buys wood pellet machines mainly for the processing of raw materials and auxiliary production of commodities. The production efficiency of the wood pellet machine is high. Biomass pellets produced per unit hour can provide the industry's daily production capacity. If the industry completes production only by purchasing wood during the production process, once the supplier becomes out of stock, the industry's production line will have to stop. In industries with more constraints, buy a wood pellet machine and control the supply of raw materials in yourself. The high output of equipment will continuously accelerate the production of the industry and will not bring any restrictions to the industry. 2. The lower-cost investment of equipment produces greater economic benefits。 The price of wood pellet machine is small, the energy consumption of equipment is small, the industry's overall investment cost in equipment is less. Compared with the economic benefits, the investment cost can be said to be very small. The raw materials for the production of wood pellet machine can be waste wood, value, old home, etc. As long as it is wooden products, no matter old or new, it can be used as raw materials to produce high-quality wood pellets, without any impact on the quality of industrial production. Therefore, the wood pellet machine is production equipment that must be equipped in the production of the wood industry. The economic benefits of equipment should be recognized by all walks of life. The wood pellet production line equipment turns wooden products into energy resources without changing any performance. It only gathers their dispersed energy for use in our lives and our economic development. 
Biomass Pellet Production Line Supplier02019-06-30 18:21:03
Fusmar Machinery is a professional biomass pellet production line supplier, this article we will introduce biomass pellet production line in detail. Biomass fuel pellets produced by this production line are environmentally friendly and energy-saving, and are also a renewable resource. Compared with natural coal biomass pellet resources, it has been highly recognized and influenced by the market and consumers. Biomass Pellet Production Line Introduction With the continuous improvement of living standards, people's consumption awareness is also gradually diversified. On the premise of advocating resource conservation and energy conservation, environmental protection, conservation and renewable resources have also become a topic of concern to everyone of us. Therefore, the biomass renewable resource utilization market has also become a big market. At the same time, biomass pellet production line uses biomass energy to process biomass wood pellets fuel, environmental protection and energy saving equipment and other machinery is also constantly appearing, which is warmly welcomed by investors. So, the biomass energy and resource market has a broad development prospect and great potential.Therefore, as biomass energy resources, should seize this rare opportunity to make a big display in the market. Concept Of Biomass Biomass refers to the use of atmosphere, water, land and other organisms produced by photosynthesis, that is, all living organic matter can grow is generally called biomass.Characteristics: renewable, lowpollution,widespread distribution.Biomass includes plants, animals and microorganisms. Broad concept: biomass includes all plants, microorganisms and animals that eat plants and microorganisms as well as their waste products.Representative biomass such as crops, crop waste, wood, wood waste and animal waste.Narrow sense: biomass mainly refers to the substances such as straws, trees and other lignocellulose (lignin for short), wastes of agricultural products processing industry, agricultural and forestry wastes and livestock manure and wastes in the production of animal husbandry in the process of agricultural and forestry production, except for grains and fruits. Uses Of Biomass Fuel Pellet fuel is a new type of bio-energy, which can replace wood, fuel oil, liquefied gas, etc. It is widely used in heating, domestic cooking range, hot water boiler, industrial boiler, biomass power plant, etc. Process Flow Of Biomass Pellet Production Line Biomass fuel production line equipment mainly includes biomass pellet hammer mill, classification screen, dryer, wood pellet making machine, cooling machine, packing machine and process matching dust removal, water feeding equipment.The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. 1. Sieve.Screen large materials and impurities to ensure that raw materials meet pelletization requirements.Usually between 2 and 6mm. 2. Drying.Biomass fuel pelletization requirements of water under 20%, drying with the drum dryer. 3. Pelletization.The key step, completed by biomass pellet machine, pellet quality, stable yield and high yield. 4. Cool down.Due to the extrusionwork,biomass pellet temperature is higher, need to be cooled after packaging.Counterflow type cooling machine, reasonable design, fast cooling. 5.Sieve.Through the vibration grading sieve, the qualified biomass pellets are screened out, and other unqualified products are recycled and reused. 6. Packaging.Automatic measurement, automatic sealing, save time and labor, improve efficiency, reduce cost. Dust removal equipment will recycle the dust generated in the production process for pelleting, reducing waste and improving revenue. Biomass Pellet Production Line Product Advantages 1. Adopt the principle of die roll extrusion molding to process biomass materials such as agricultural and forestry residues into solid molding fuel, so as to achieve continuous and stable industrial production. 2.The whole biomass pellet fuel production line is characterized by low power consumption, clean environmental protection, low consumption and high efficiency, high molding rate and high molding quality. 3. Stable operation of equipment, lower power consumption, continuous operation without deformation, and strong output. 
3-5T/H Animal Feed Pellet Production Line Supplier12019-07-10 00:09:33
Industry Animal Feed Pellet Plant 3-5T/H feed pellet plant is very suitable for a industrial feed pellet manfuacturer. This plant is equipped with the ring die SZLH350 ring die feed pellet machine.The maximum capacity of the SZLH350 is 8T/H. This production line can process materials of corn,soybean, wheat and other cereals into pellets for chicken and cow.  3-5T Animal Feed Pellet Plant Features 1. The feed pellet production line  has a small footprint and a high degree of automation. 2. It produces smooth and hard particles suitable for a variety of animals. 3. The pellets are very nutritious and can meet the growth needs of animals. 4. This production line is widely used in medium and large feed plants. 5. The raw materials may be various cereals such as corn, barley, wheat and soybeans, and crude fibers such as cotton stalks, corn fiber, grass and the like. 3-5T Animal Feed Pellet Plant Flow Chart 1. Raw material receiving and cleaning process This process is used to clean and organize large pieces such as corn stover, stones, rope heads, branches, corn cobs and mud, small pieces such as sand and withered grains. When the raw material is a powder, a tapered powder sieve is used to clean the debris in the powder. 2. Crushing process - hammer mill We crush the raw material into a powder using a hammer mill.The material should be crushed into suitable pellets before the pelletizing process.  3. Pellet cooling process The new finished feed pellets are of high temperature,it will become moist if pack them directly into the packing bag.So they need cooling to the room temperature, the pellets can store long time before after cooling.  4. Screening process This process mainly use the vibrating screen and full ring rotating screen, the qualified pellets will be delivered to the next process.  5. Packing Process This process is to pack the pellets into different bags, the packing bag size is from 10-50KG. 
Small Fish Feed Pellet Production Line Supplier12019-07-10 00:05:00
Small Fish Feed Pellet Plant This small fish feed pellet production line  production line can produce the feed pellets for frewarter fish,marine fish. It can also produce floating fish feed pelles and the submerged fish feed. Small Fish Feed Pellet Production Line Applications 1. This small fish feed pellet production line production line can produce the feed pellets for frewarter fish,marine fish. It can also produce floating fish feed pelles and the submerged fish feed.  Material Of Small Fish Feed Pellet Production Line There are 4 kinds of materials for the fish feed pellet, they are: 1.1Protein Material Cardamom om,cotton kernel,rapeseed meal,fish meal, blood bone meal. 1.2Energy material Maize, porcelain powder, 1.3 Oil raw material Fish oil, soybean oil, rapeseed oil. 1.4Premix Material Some mineral,vitamin 2. Process Of Small Fish Feed Pellet Production Line Material Crushing→Mixing→Conveying→Fish Feed Pellet Machine →Drying→Cooling→Blending 3.1 Material Crushing The fish feed pelletizing require the raw material size less than 6mm, so protein or energy material need crushing before the pelletizing process. Below is the crusher in this small fish feed pellet line.  3.2Material Mixing In order to ensure the pellets has uniform nutrition, it need to mix all the raw materials before the extrauding process. The Screw conveyor  connects crusher and mixer. This is process is very important to the finished pellet quality. 3.Pellet Extrauding 4.  Working Principle The extruder has a pair of screws and sleeves that have the function of mixing and twisting. After the raw material enters the expansion chamber, the material is squeezed, rubbed, sheared, etc. between the screw sleeves, and the internal pressure is continuously increased, up to 4Mpa, and the temperature is continuously rising, up to 140 degrees Celsius. During the period of 3-7s, the temperature and pressure increase sharply, and the structure of the material changes, which further gelatinizes the starch, denatures the protein, destroys the crude fiber, and kills harmful bacteria such as Salmonella. The high temperature and high pressure materials come out from the discharge port, and the pressure is suddenly released in an instant, and the water is partially flashed. After cooling, the material is loose and porous, and the expanded material is in the form of agglomerates, flocs or coarse chips. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions