Industry Wood Pellet Production Line related questions

Answers
Asked by
Updated
Industry Wood Pellet Production Line0amyyan1234562019-06-05 21:01:02
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line  is designed for industrial production and can produce biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm), sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from wood logs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine. And ring die wood pellet machine  is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it needs the cooler to lower the temperature and the moisture. After this process, the pellets will be suitable for longtime storing. Usually the industry pellet production line will use the countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation. 
Industry Wood Pellet Production Line0amyyan1234562019-06-04 23:30:04
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line is designed for industrial production and can produce  biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per  hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating  purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. Industry Wood Pellet Production Line Flowchart A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm),  sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust  pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from woodlogs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush  the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the  sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is  less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that  capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable  performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine. And Ring  die wood pellet machine is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it  needs the cooler to lower the temperature and the moisture. After this process, the pellets will be  suitable for longtime storing. Usually the industry pellet production line will use the  countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and  packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation.  
How Does A Wood Pellet Production Line Work?12019-07-10 00:07:41
Industry Wood Pellet Production Line Introduction The complete sawdust pellet production line  is designed for industrial production and can produce biomass pellets of any type of agricultural and forestry waste, with a capacity of 1 to 10 tons per hour. Finished wood pellets are widely used in industrial boilers and large power plants for heating purposes as well as domestic use to to ease the energy crisis and meet environmental requirements. A complete sawdust pellet production line for the wood pellets, including: Raw material preparation, wood crushing (logs and other biomass material diameter more than 5 mm), sawdust drying (if the raw material moisture is more than 18% water), sawdust pelletizing, sawdust pellets cooling, biomass pellets packaging.  Detailed Process Of The Wood Pellet Production Line 1. Material Preparation Sawdust can be made from woodlogs, wood shavings, any forestry waste or biomass straw, straw, etc. Wood chipper is maily to crush the wood logs into wood chips, and the crusher is mainly to crush the wood chips into sawdust. 2. Sawdust Drying Process The perfect raw material moisture before pelletizing is 11%-17%, so before the pelletizing, the sawdust needs drying machine to meet the moisture standard. If the biomass pellet line capacity is less than 1000KG/H, air flow dryer is a good choice. Because the air flow dryer can process that capacity with low consumption,usually it can dry the moisture 20%.But if the capacity is more than 1T/H, then it needs the rotary dryer, it can process large capacity and dry the sawdust with long routing. In oerder to save the cost, we have 3 layer rotary dryer, that is the sawdust drying route is 3 times than one layer dryer, so the drying effciency is improved obviously. By this way, the moisture will dry off 40%. 3. Wood Pelletizing Process The pelletizer is an important part of the sawdust pellet production line with reliable and stable performance. If the capacity is less than 1T/H, you can choose the flat die pellet machine . And ring die wood pellet machine  is usually for the capacity from 1T/H to 20T/H. 4. Wood Cooling Process After pelletizing, the pellet temperature will be within 60-80℃,the moisture is close to 15%. So it needs the cooler to lower the temperature and the moisture. After this process, the pellets will be suitable for longtime storing. Usually the industry pellet production line will use the countercurrent cooler as below photo. 5. Auto Packing Process The packaging process will keep the wood pellets from moisture. Our automatic wood chip weighing and packing system adopts PLC control stytem, it’s high weighing accuracy, easy operation. 
Small Wood Pellet Production Line1amyyan1234562019-07-10 00:04:58
Small Wood Pellet Production Line  Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying,pelletizing,conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  
500kg/H Wood Pellet Production Line0amyyan1234562019-06-09 18:40:55
Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying, pelletizing, conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. The feed pellet materials are maize, rice tips, sorghum, wheat, bran of rice wheat and maize.  Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine  is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  https://youtu.be/aR8RW3McutA
500kg/H Wood Pellet Production Line Supplier02019-06-26 18:07:26
Small Wood Pellet Production Line  Ring die wood pellet production line mainly uses the ring die pellet machine. Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. Ring Die Wood Pellet Production Line Introduction Ring die wood pellet production line mainly uses the ring die pellet machine . Since ring die pellet machine usually has big production capacity, so the ring die pellet machine line is usually for the large scale feed or wood pellet plant. the capacity is from 1TH to 20T/H. The wood pellet production line include the process of crushing, drying,pelletizing,conveying,cooling and packing. The feed pellet line has the mixing process after the crushing.  Ring Die Wood Pellet Production Line Material The wood pellet materials are groundnut shell, sugarcane bio-gases, caster shells/stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks/straws, rice husks, forestry wastes, wood chips and many other agro wastes. Ring Die Wood Pellet Production Line Advantages 1. Big Capacity The ring die pellet machine is suitable for large scale wood or feed pellet plant. 2. It has simple structure, wide adaptability, small floor space and low noise. 3. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 4. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed. 5. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.  
Biomass Wood Pellets Biomass Pellet Production Line Supplier02019-06-28 18:14:29
Fusmar Machinery is a professional biomass pellet production line supplier, this article we will introduce biomass pellet production line in detail. Biomass fuel pellets produced by this production line are environmentally friendly and energy-saving, and are also a renewable resource. Compared with natural coal biomass pellet resources, it has been highly recognized and influenced by the market and consumers. Biomass Pellet Production Line Introduction With the continuous improvement of living standards, people's consumption awareness is also gradually diversified. On the premise of advocating resource conservation and energy conservation, environmental protection, conservation and renewable resources have also become a topic of concern to everyone of us. Therefore, the biomass renewable resource utilization market has also become a big market. At the same time, biomass pellet production line uses biomass energy to process biomass wood pellets fuel, environmental protection and energy saving equipment and other machinery is also constantly appearing, which is warmly welcomed by investors. So, the biomass energy and resource market has a broad development prospect and great potential. Therefore, as biomass energy resources, should seize this rare opportunity to make a big display in the market. Concept Of Biomass Biomass refers to the use of atmosphere, water, land and other organisms produced by photosynthesis, that is, all living organic matter can grow is generally called biomass. Characteristics: renewable, low pollution, widespread distribution. Biomass includes plants, animals and microorganisms. Broad concept: biomass includes all plants, microorganisms and animals that eat plants and microorganisms as well as their waste products. Representative biomass such as crops, crop waste, wood, wood waste and animal waste. Narrow sense: biomass mainly refers to the substances such as straws, trees and other lignocellulose (lignin for short), wastes of agricultural products processing industry, agricultural and forestry wastes and livestock manure and wastes in the production of animal husbandry in the process of agricultural and forestry production, except for grains and fruits. Uses Of Biomass Fuel Pellet fuel is a new type of bio-energy, which can replace wood, fuel oil, liquefied gas, etc. It is widely used in heating, domestic cooking range, hot water boiler, industrial boiler, biomass power plant, etc. Process Flow Of Biomass Pellet Production Line Biomass fuel production line equipment mainly includes biomass pellet hammer mill , classification screen, dryer, wood pellet making machine, cooling machine, packing machine and process matching dust removal, water feeding equipment. The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. 1. Sieve. Screen large materials and impurities to ensure that raw materials meet pelletization requirements. Usually between 2 and 6mm. 2. Drying. Biomass fuel pelletization requirements of water under 20%, drying with the drum dryer. 3. Pelletization. The key step, completed by biomass pellet machine, pellet quality, stable yield and high yield. 4. Cool down. Due to the extrusion work, biomass pellet temperature is higher, need to be cooled after packaging. Counterflow type cooling machine, reasonable design, fast cooling. 5. Sieve. Through the vibration grading sieve, the qualified biomass pellets are screened out, and other unqualified products are recycled and reused. 6. Packaging. Automatic measurement, automatic sealing, save time and labor, improve efficiency, reduce cost. Dust removal equipment will recycle the dust generated in the production process for pelleting, reducing waste and improving revenue. Biomass Pellet Production Line Product Advantages 1. Adopt the principle of die roll extrusion molding to process biomass materials such as agricultural and forestry residues into solid molding fuel, so as to achieve continuous and stable industrial production. 2. The whole biomass pellet fuel production line is characterized by low power consumption, clean environmental protection, low consumption and high efficiency, high molding rate and high molding quality. 3. Stable operation of equipment, lower power consumption, continuous operation without deformation, and strong output.
Biomass Pellet Production Line Supplier02019-06-30 18:21:03
Fusmar Machinery is a professional biomass pellet production line supplier, this article we will introduce biomass pellet production line in detail. Biomass fuel pellets produced by this production line are environmentally friendly and energy-saving, and are also a renewable resource. Compared with natural coal biomass pellet resources, it has been highly recognized and influenced by the market and consumers. Biomass Pellet Production Line Introduction With the continuous improvement of living standards, people's consumption awareness is also gradually diversified. On the premise of advocating resource conservation and energy conservation, environmental protection, conservation and renewable resources have also become a topic of concern to everyone of us. Therefore, the biomass renewable resource utilization market has also become a big market. At the same time, biomass pellet production line uses biomass energy to process biomass wood pellets fuel, environmental protection and energy saving equipment and other machinery is also constantly appearing, which is warmly welcomed by investors. So, the biomass energy and resource market has a broad development prospect and great potential.Therefore, as biomass energy resources, should seize this rare opportunity to make a big display in the market. Concept Of Biomass Biomass refers to the use of atmosphere, water, land and other organisms produced by photosynthesis, that is, all living organic matter can grow is generally called biomass.Characteristics: renewable, lowpollution,widespread distribution.Biomass includes plants, animals and microorganisms. Broad concept: biomass includes all plants, microorganisms and animals that eat plants and microorganisms as well as their waste products.Representative biomass such as crops, crop waste, wood, wood waste and animal waste.Narrow sense: biomass mainly refers to the substances such as straws, trees and other lignocellulose (lignin for short), wastes of agricultural products processing industry, agricultural and forestry wastes and livestock manure and wastes in the production of animal husbandry in the process of agricultural and forestry production, except for grains and fruits. Uses Of Biomass Fuel Pellet fuel is a new type of bio-energy, which can replace wood, fuel oil, liquefied gas, etc. It is widely used in heating, domestic cooking range, hot water boiler, industrial boiler, biomass power plant, etc. Process Flow Of Biomass Pellet Production Line Biomass fuel production line equipment mainly includes biomass pellet hammer mill, classification screen, dryer, wood pellet making machine, cooling machine, packing machine and process matching dust removal, water feeding equipment.The processing technology adopted the mixing technology of primary drying, secondary crushing, continuous feeding and adjusting feeding, and the fuel molding rate of pellet molding reached 98%, with high packing density and pellet density. 1. Sieve.Screen large materials and impurities to ensure that raw materials meet pelletization requirements.Usually between 2 and 6mm. 2. Drying.Biomass fuel pelletization requirements of water under 20%, drying with the drum dryer. 3. Pelletization.The key step, completed by biomass pellet machine, pellet quality, stable yield and high yield. 4. Cool down.Due to the extrusionwork,biomass pellet temperature is higher, need to be cooled after packaging.Counterflow type cooling machine, reasonable design, fast cooling. 5.Sieve.Through the vibration grading sieve, the qualified biomass pellets are screened out, and other unqualified products are recycled and reused. 6. Packaging.Automatic measurement, automatic sealing, save time and labor, improve efficiency, reduce cost. Dust removal equipment will recycle the dust generated in the production process for pelleting, reducing waste and improving revenue. Biomass Pellet Production Line Product Advantages 1. Adopt the principle of die roll extrusion molding to process biomass materials such as agricultural and forestry residues into solid molding fuel, so as to achieve continuous and stable industrial production. 2.The whole biomass pellet fuel production line is characterized by low power consumption, clean environmental protection, low consumption and high efficiency, high molding rate and high molding quality. 3. Stable operation of equipment, lower power consumption, continuous operation without deformation, and strong output. 
3-5T/H Animal Feed Pellet Production Line Supplier12019-07-10 00:09:33
Industry Animal Feed Pellet Plant 3-5T/H feed pellet plant is very suitable for a industrial feed pellet manfuacturer. This plant is equipped with the ring die SZLH350 ring die feed pellet machine.The maximum capacity of the SZLH350 is 8T/H. This production line can process materials of corn,soybean, wheat and other cereals into pellets for chicken and cow.  3-5T Animal Feed Pellet Plant Features 1. The feed pellet production line  has a small footprint and a high degree of automation. 2. It produces smooth and hard particles suitable for a variety of animals. 3. The pellets are very nutritious and can meet the growth needs of animals. 4. This production line is widely used in medium and large feed plants. 5. The raw materials may be various cereals such as corn, barley, wheat and soybeans, and crude fibers such as cotton stalks, corn fiber, grass and the like. 3-5T Animal Feed Pellet Plant Flow Chart 1. Raw material receiving and cleaning process This process is used to clean and organize large pieces such as corn stover, stones, rope heads, branches, corn cobs and mud, small pieces such as sand and withered grains. When the raw material is a powder, a tapered powder sieve is used to clean the debris in the powder. 2. Crushing process - hammer mill We crush the raw material into a powder using a hammer mill.The material should be crushed into suitable pellets before the pelletizing process.  3. Pellet cooling process The new finished feed pellets are of high temperature,it will become moist if pack them directly into the packing bag.So they need cooling to the room temperature, the pellets can store long time before after cooling.  4. Screening process This process mainly use the vibrating screen and full ring rotating screen, the qualified pellets will be delivered to the next process.  5. Packing Process This process is to pack the pellets into different bags, the packing bag size is from 10-50KG. 
Small Fish Feed Pellet Production Line Supplier12019-07-10 00:05:00
Small Fish Feed Pellet Plant This small fish feed pellet production line  production line can produce the feed pellets for frewarter fish,marine fish. It can also produce floating fish feed pelles and the submerged fish feed. Small Fish Feed Pellet Production Line Applications 1. This small fish feed pellet production line production line can produce the feed pellets for frewarter fish,marine fish. It can also produce floating fish feed pelles and the submerged fish feed.  Material Of Small Fish Feed Pellet Production Line There are 4 kinds of materials for the fish feed pellet, they are: 1.1Protein Material Cardamom om,cotton kernel,rapeseed meal,fish meal, blood bone meal. 1.2Energy material Maize, porcelain powder, 1.3 Oil raw material Fish oil, soybean oil, rapeseed oil. 1.4Premix Material Some mineral,vitamin 2. Process Of Small Fish Feed Pellet Production Line Material Crushing→Mixing→Conveying→Fish Feed Pellet Machine →Drying→Cooling→Blending 3.1 Material Crushing The fish feed pelletizing require the raw material size less than 6mm, so protein or energy material need crushing before the pelletizing process. Below is the crusher in this small fish feed pellet line.  3.2Material Mixing In order to ensure the pellets has uniform nutrition, it need to mix all the raw materials before the extrauding process. The Screw conveyor  connects crusher and mixer. This is process is very important to the finished pellet quality. 3.Pellet Extrauding 4.  Working Principle The extruder has a pair of screws and sleeves that have the function of mixing and twisting. After the raw material enters the expansion chamber, the material is squeezed, rubbed, sheared, etc. between the screw sleeves, and the internal pressure is continuously increased, up to 4Mpa, and the temperature is continuously rising, up to 140 degrees Celsius. During the period of 3-7s, the temperature and pressure increase sharply, and the structure of the material changes, which further gelatinizes the starch, denatures the protein, destroys the crude fiber, and kills harmful bacteria such as Salmonella. The high temperature and high pressure materials come out from the discharge port, and the pressure is suddenly released in an instant, and the water is partially flashed. After cooling, the material is loose and porous, and the expanded material is in the form of agglomerates, flocs or coarse chips. 
Feed Mill Equipment In Animal Feed Pellet Production Line02019-08-05 02:12:28
The feed mill equipment equipped with a pellet section equipment based on the production of powdered feed equipment. It composed of crushing, mixing, pelletization, cooling, drying, packing, and other processes. The process is continuous and reasonable, and the performance of every single machine is good. The equipment has a compact structure, small floor space, low energy consumption, and high efficiency. Zhengzhou Fusmar Machinery is a professional feed pellet production line manufacturer, This article will introduce feed mill equipment in detail. The Usage Of Feed Mill Equipment The feed mill equipment is a medium-sized feed mill and feed machinery for producing powdery materials, concentrated materials and pellet feeds with a high degree of automation. It is ideal equipment for animal husbandry. It is made up of a combination of crusher, pulse dust collector, screw conveyor, mixer, pelletizer, bucket elevator, counter flow cooler, and vibrating screen. It integrates the functions of crushing, mixing, lifting, pelletization, cooling, and screening. It automatically feeds, feeds quickly, and smoothly discharges. It is a kind of feed pellet production line with less investment and quick effect. Which integrates automation, high efficiency, and advanced nature. Introduction Of The Combined Unit Machine Feed Hammer Mill The feed hammer mill is the most widely used crusher, which is driven by a high-speed shearing and hammering under a strong airflow and filtered by a stainless steel screen to obtain the desired powder. The device provided with a dust suction device. No powder contamination. It has the characteristics of low temperature, low noise, and high efficiency. Suitable for crushing various production materials. Horizontal Ribbon Mixer The horizontal double-shaft ribbon mixer stirred dry and powdery material that evenly mixed. During the mixing, two-rotor moved the material in opposite directions, and the composite motion carried out. The biaxial paddles made of material along the inner wall of the machine slot for two clockwise rotations and axis rotated the material near the axis. Pushed from the inside to the sides, the outer spiral drives the material close to the wall to rotate the shaft, and the axial direction pushed from both sides to the inside. Thus causing convection circulation, shearing and mixing in the material cylinder, and the material quickly and evenly mixed in a short time. Ring Die Pellet Machine The pellet formation process can denature the pancreatic enzyme resistance factor in grains and beans, reduce the adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various diseases of the insects and digestive diseases. This machine has the advantages of simple structure, wide adaptability, small occupied area, and low noise. Counter Flow Cooler 1. Using the principle of counter flow cooling, the pellets cooled sufficiently and evenly. 2. Adopting a unique sliding valve type discharging mechanism to discharge materials, smooth discharge, stable and reliable operation. 3. The temperature of the pellet after cooling is not higher than room temperature 3-5 ° C, the precipitation rate is not less than 3 - 3.5%. 4. Mainly suitable for the cooling of pellets. The Advantage Of Feed Mill Equipment 1. The structural form has two types: integral steel frame and floor type. The overall steel frame layout is compact, the shape is beautiful and style, the floor type is easy to use and maintain. 2. Small and medium-sized feed machinery adopts manual metering and ingredients, and the equipment investment is small, economical and practical. 3. Large and medium-sized feed machinery adopts computer automatic metering and batching, with good batching precision, a high degree of mechanization and automation. 4. Zhengzhou Fusmar Machinery designed the standard type feed project is the best technical solution, keeping up with domestic and international development trends. The Significance Of Feed Pellet Production Line It is of great significance for the feed to mature, increase nutrition, increase absorption rate, kill germs, store transport, reduce costs, save resources, adapt to the chewing function of animals, and improve the efficiency of animal husbandry. During production and processing, the friction of the machine automatically heats up itself. So that the material gelatinized, matured, pelletization and cooled once. The surface of the package can clean and smooth, the hardness is moderate, and it is easy to seal and store. The pellet thickness can adjust according to the needs of the user. For processing pellets such as pigs, cattle, sheep, rabbits, chickens, ducks and fish. Zhengzhou Fusmar Machinery specializes in the production of feed hammer mill, feed pellet machine, feed mixing machine, feed cooling machine, feed packing machine, and other feed machinery. https://www.youtube.com/watch?v=6Pq7VbvX3Nc&t=12s  
Wood Pellet Machine Manufascturer02019-07-08 18:53:34
Zhengzhou Fusmar Machinery is a professional wood pellet machine manufacturer, the wood pellet machine price is reasonable, and is welcomed by all over the world customers, this article we will introduce this machine in detail. Why Choose Wood Pellet Machine Wood pellet machine is biomass new energy equipment, is wood pellets production equipment. Taking eucalyptus, birch, poplar, fruit, bamboo chips and crop straw as raw materials, the finished wood pellets are made by crushing, drying, screening, pelleting, cooling and packaging. Its finished products are used in biomass power generation, boilers, fireplaces, household equipment, etc. The raw material of wood pellet machine is some waste materials in daily production. The reuse of resources is realized through processing. Development Prospect Of Wood Pellet Machine Nowadays, the emergence of solar energy and photovoltaic energy is mainly to alleviate the current energy shortage. Because in the continuous development, it needs to use a lot of energy, so once the energy problem, it will directly affect people's real life, affect the development of the whole society. However, many people do not know is, now the emergence of the wood pellet machine, also became a good equipment, can generate new energy for people. This wood pellet making  machine, is a kind of biomass pretreatment equipment, mainly is like some sawdust . Performance Characteristics Of Wood Pellet Machine The main engine of the wood pellet machine is driven by high-precision gear, the ring die is of quick-release type, and the feeding is of frequency conversion and speed regulation to ensure even feeding. The new generation of wood sawdust making machine adopts the international advanced manufacturing technology, which can customize the high quality dies for various raw materials, extending the service life of the equipment, improving the product quality and reducing the consumption cost. Advantages Of Wood Pellet Machine The wood pellet machine adopts the screw center pressure regulating mechanism, the gap of the die can adjust, suitable for different materials, to ensure the pressing effect. Biomass pellet machine using the body large groove wide, pressure and wear resistance. Wood chips, straw compression molding needs a lot of pressure, in the same pelletizing, pressing, rod making equipment, the pressure wheel part is the center of the whole equipment. Granulator equipment can arbitrarily increase the pressure wheel, the advantage is the other equipment cannot compare. Advantage 1: The wood pellet machine press wheel increase, make the bearing increase, enhance the ability to withstand pressure. Advantage 2:After increase the press wheel of the wood pellet machine, the temperature generated by the extrusion friction is not easy to be transmitted to the bearing room, so as to ensure that the bearing works at low temperature and the grease is not easy to overflow. Advantage 3:After increase the press wheel of wood pellet machine, the press wheel can be repaired for 2-3 times, which extends the service life, reduces the production cost and increases the profit margin of the project. Zhengzhou Fusmar Machinery as a professional wood sawdust machine manufacturer. In order to meet the requirement of customers, we not only provide a complete set of wood pellet production line but also provide a single machine in the process of making wood pellets. 

Ask New Question  

  • You are not logged in,answer will be Anonymous.Set Nickname | Sign In | Sign Up
  • tags separate by ','
  • Shortcuts:Ctrl+Enter

Latest Questions